Dump
| Rated Payload |
52030 lb (23600 kg) |
| Capacity – Heaped |
19.6 yd3 (15 m3) |
| Capacity – Struck |
14.4 yd3 (11 m3) |
| Tailgate Heaped SAE 2:1 |
20.4 yd3 (15.6 m3) |
| Tailgate Struck |
14.5 yd3 (11.2 m3) |
| Dump Angle |
70° |
| Raise Time |
10 sec |
| Lower Time |
8 sec |
Dimensions
| Overall Length |
415.2 in (10547 mm) |
| Wheelbase |
156.7 in (3979 mm) |
| Overall Width |
145.8 in (3704 mm) |
| Track |
89.6 in (2275 mm) |
| Overall Height |
148.8 in (3779 mm) |
| Height to Top of Cab |
137.1 in (3482 mm) |
| Ground Clearance |
21.2 (539 mm) |
| Dump Clearance |
22 in (558 mm) |
| Loading Height |
107.3 in (2725 mm) |
| Body Raised Height |
248.3 in (6306 mm) |
Turning Circle
| Turning Dimensions – Steer Angle – Left/Right |
±45° |
| Turning Dimensions – Sae Turning Radius |
294 in (7470 mm) |
| Turning Dimensions – Clearance Radius |
318 in (8075 mm) |
| Turning Dimensions – Inside Radius |
153 in (3879 mm) |
| Turning Dimensions – Aisle Width |
210 in (5332 mm) |
Dimensions are for machines equipped with 23.5R25 tires
Engine Details
| Number Of Cylinders |
6 |
| Engine Make |
Cat |
| Engine Model |
Cat C9.3 Acert |
| Gross Power |
320 hp (238.7 kw) |
| Net Power |
314 hp (234.2 kw) |
| Power Measured @ |
1200 rpm |
| Peak Torque |
1263 lb ft (1712 Nm) |
| Torque Measured @ |
1200 rpm |
| Displacement |
567 cu in (9.3 L) |
| Aspiration |
Turbocharged + Air-to-Air Aftercooled |
| Emission Standards |
U.S. EPA Tier 4 Final/EU Stage IV |
Operational Specs
| Sound Level in Cab |
76 dB(A) |
| Cab FOPS/ROPS Standards |
ISO 3449 Level II – 2005 / ISO 3471 – 2008 |
| Steering Standards |
ISO 5010 – 2007 |
| Brakes Standards |
ISO 3450 – 2011 |
| Drive |
6×6 |
| Tire Size |
23.5R25 |
| Steering Lock To Lock |
4.75 seconds @ 60 rpm |
| Body Plate Type |
High Strength Brinell HB450 Wear Resistant Steel |
Transmission
| Transmission Type |
The Cat TH31 auto shift transmission with Advanced Productivity Electronic Control Strategy (APECS) |
| Clutch |
Electronic Clutch Pressure Control (ECPC) |
| Number Of Gears |
6F / 1R |
| Forward 1 |
5 mph (8.1 km/h) |
| Forward 2 |
9 mph (14.5 km/h) |
| Forward 3 |
14 mph (22.6 km/h) |
| Forward 4 |
21 mph (33.8 km/h) |
| Forward 5 |
30 mph (48.3 km/h) |
| Forward 6 |
35 mph (56.4 km/h) |
| Reverse 1 |
6 mph (9.7 km/h) |
Operating Weights
| Cat 725C |
Empty |
Rated Load |
Loaded |
| Front Axle |
31813 lb (14430 kg) |
5423 lb (2460 kg) |
37236 lb (16890 kg) |
| Center Axle |
10030 lb (4550 kg) |
23303 lb (10570 kg) |
33333 lb (15120 kg) |
| Rear Axle |
9348 lb (4240 kg) |
23303 lb (10570 kg) |
32651 lb (14810 kg) |
| Total |
51191 lb (23220 kg) |
52029 lb (23600 kg) |
103220 lb (46820 kg) |
Service Refill Capacities
| Fuel Tank Capacity |
108.8 gal (412 L) |
| DEF Tank Capacity |
5.3 gal (20 L) |
| Engine Oil Capacity |
10 gal (38 L) |
| Cooling System Capacity |
21.9 gal (83 L) |
| Hydraulic System Capacity |
29.1 gal (110 L) |
| Transmission Oil Capacity |
12.4 gal (47 L) |
| Final Drives / Differential |
35.7 gal (135 L) |
| Output Transfer Gear Box |
6.3 gal (24 L) |
