Contents
Dump
| Rated Payload | 57320.12 lb (25999.98 kg) |
Engine Details
| Displacement | 567 cu in (9.3 L) |
| Bore | 4.6 in (115.1 mm) |
| Stroke | 5.9 in (149.1 mm) |
| Net Power – Sae J1349 | 314 hp (234.2 kw) |
| Gross Power – Sae J1995 | 320 hp (238.7 kw) |
| Engine Model | Cat C9.3 ACERT |
| Net Power – Iso 14396 | 316 hp (235.7 kw) |
| No Engine De-Rating Required Below | 8400 ft in (2560.4 m) |
| Peak Engine Torque Gross (Sae J1995) | 1275 lb ft (1728.7 Nm) |
| Peak Engine Torque Net (Iso 14396) | 1263 lb ft (1712.4 Nm) |
| Peak Engine Torque Speed | 1200 rpm |
| Engine Model – U.S. Epa Tier 4 Final/Eu Stage Iv | Cat C9.3 ACERT |
Transmission
| Forward – 1 | 5 mph (8.1 km/h) |
| Forward – 2 | 9 mph (14.5 km/h) |
| Forward – 3 | 14 mph (22.6 km/h) |
| Forward – 4 | 21 mph (33.8 km/h) |
| Forward – 5 | 30 mph (48.3 km/h) |
| Forward – 6 | 35 mph (56.4 km/h) |
| Reverse – 1 | 6 mph (9.7 km/h) |
Steering
| Lock To Lock | 4.75 seconds @ 60 rpm |
Service Refill Capacities
| Cooling System | 21.9 gal (83 L) |
| Fuel Tank Capacity | 108.8 gal (411.9 L) |
| Engine Crankcase | 10 gal (37.9 L) |
| Transmission | 12.4 gal (47 L) |
| Hydraulic System | 29.1 gal (110.2 L) |
| Final Drives/Differential | 35.7 gal (135.2 L) |
| Output Transfer Gear Box | 6.3 gal (23.9 L) |
| Def Tank (Iso 2224-1) | 5.3 gal (20.1 L) |
Standards
| Cab – Fops | ISO 3449 Level II – 2005 |
| Cab – Rops | ISO 3471 – 2008 |
| Brakes | ISO 3450 – 2011 |
| Steering | ISO 5010 – 2007 |
Operating Weights
| Front Axle – Empty | 31813 lb (14430.2 kg) |
| Center Axle – Empty | 10030 lb (4549.6 kg) |
| Rear Axle – Empty | 9348 lb (4240.2 kg) |
| Total – Empty | 51191 lb (23219.9 kg) |
| Front Axle – Rated Load | 5423 lb (2459.9 kg) |
| Center Axle – Rated Load | 23303 lb (10570.1 kg) |
| Rear Axle – Rated Load | 23303 lb (10570.1 kg) |
| Total – Rated Load | 52029 lb (23600 kg) |
| Front Axle – Loaded | 37236 lb (16890 kg) |
| Center Axle – Loaded | 33333 lb (15119.6 kg) |
| Rear Axle – Loaded | 32651 lb (14810.3 kg) |
| Total – Loaded | 103220 lb (46819.9 kg) |
Sound Levels
| Interior Cab | 76 dB(A) |
Turning Circle
| Note | Dimensions are for machines equipped with 23.5R25 tires. |
| Turning Dimensions – Steer Angle – Left/Right | 45 degrees |
| Turning Dimensions – Sae Turning Radius | 294 in (7467.6 mm) |
| Turning Dimensions – Clearance Radius | 318 in (8077.2 mm) |
| Turning Dimensions – Inside Radius | 153 in (3886.2 mm) |
| Turning Dimensions – Aisle Width | 210 in (5334 mm) |
Body Capacities
| Heaped (Sae 2:1) | 19.6 yd3 (15 m3) |
| Struck | 14.4 yd3 (11.1 m3) |
| Tailgate Struck | 14.5 yd3 (11.1 m3) |
| Tailgate Heaped Sae 2:1 | 20.4 yd3 (15.6 m3) |
Body Hoist
| Raise Time | 10 s |
| Lower Time | 8 s |
Body Plate
| Body Plate Type | High Strength Brinell HB450 Wear Resistant Steel |
