Contents
Dump
| Dump Angle | 45 degrees |
| Rated Payload | 62000 lb (28122.73 kg) |
| Capacity – Heaped | 23 yd3 (17.59 m3) |
| Capacity – Struck | 17.4 yd3 (13.31 m3) |
| Lower Time | 8 sec |
| Raise Time | 12 sec |
Engine Details
| Engine Make | CAT |
| Engine Model | C13 |
| Gross Power | 375 hp (279.7 kw) |
| Net Power | 367 hp (273.7 kw) |
| Max Torque | 1579 lb ft (2140.9 Nm) |
| Torque Measured @ | 1200 rpm |
| Displacement | 763 cu in (12.6 L) |
| Bore | 5.2 in (130.1 mm) |
| Stroke | 6.2 in (157 mm) |
| Net Power – Sae J1349 | 367 hp (273.7 kw) |
| Gross Power – Sae J1995 | 375 hp (279.7 kw) |
| Engine Model | Cat C13 |
| Net Power – Iso 14396 | 370 hp (276 kw) |
| No Engine De-Rating Required Below | 12500 ft in (3810 m) |
| Peak Engine Torque Gross (Sae J1995) | 1579 lb ft (2140.9 Nm) |
| Peak Engine Torque Net (Iso 14396) | 1564 lb ft (2120.5 Nm) |
| Peak Engine Torque Speed | 1200 rpm |
| Engine Model – U.S. Epa Tier 4 Final/Eu Stage Iv | Cat C13 ACERT |
Operational Specs
| Fuel Tank Capacity | 108.8 gal (411.9 L) |
| Hydraulic System Fluid Capacity | 29.1 gal (110.2 L) |
| Cooling System Fluid Capacity | 21.9 gal (83 L) |
| Transmission Fluid Capacity | 9.2 gal (34.9 L) |
Transmission
| Number Of Forward Gears | 6 |
| Number Of Reverse Gears | 1 |
| Forward – 1 | 5 mph (8.1 km/h) |
| Forward – 2 | 9 mph (14.5 km/h) |
| Forward – 3 | 14 mph (22.6 km/h) |
| Forward – 4 | 21 mph (33.8 km/h) |
| Forward – 5 | 29 mph (46.7 km/h) |
| Forward – 6 | 34 mph (54.8 km/h) |
| Reverse – 1 | 6 mph (9.7 km/h) |
Steering
| Lock To Lock | 4.75 seconds @ 60 rpm |
Weights
| Front Axle – Empty | 33091 lb (15009.9 kg) |
| Center Axle – Empty | 10384 % |
| Rear Axle – Empty | 9656 lb (4379.9 kg) |
| Front Axle – Loaded | 7231 % |
| Center Axle – Loaded | 27249 % |
| Rear Axle – Loaded | 27249 lb (12360 kg) |
| Total Empty | 53131 lb (24099.9 kg) |
| Total Loaded | 61729 lb (27999.9 kg) |
Service Refill Capacities
| Cooling System | 21.9 gal (83 L) |
| Fuel Tank Capacity | 108.8 gal (411.9 L) |
| Engine Crankcase | 10.5 gal (39.8 L) |
| Transmission | 9.2 gal (34.9 L) |
| Hydraulic System | 29.1 gal (110.2 L) |
| Final Drives/Differential | 35.7 gal (135.2 L) |
| Output Transfer Gear Box | 6.3 gal (23.9 L) |
| Def Tank (Iso 2224-1) | 5.3 gal (20.1 L) |
Standards
| Cab – Fops | ISO 3449 Level II – 2005 |
| Cab – Rops | ISO 3471 – 2008 |
| Brakes | ISO 3450 – 2011 |
| Steering | ISO 5010 – 2007 |
Operating Weights
| Front Axle – Empty | 33091 lb (15009.9 kg) |
| Center Axle – Empty | 10384 lb (4710.2 kg) |
| Rear Axle – Empty | 9656 lb (4379.9 kg) |
| Total – Empty | 53131 lb (24099.9 kg) |
| Front Axle – Rated Load | 7231 lb (3280 kg) |
| Center Axle – Rated Load | 27249 lb (12360 kg) |
| Rear Axle – Rated Load | 27249 lb (12360 kg) |
| Total – Rated Load | 61729 lb (27999.9 kg) |
| Front Axle – Loaded | 40322 lb (18289.8 kg) |
| Center Axle – Loaded | 37633 lb (17070.1 kg) |
| Rear Axle – Loaded | 36905 lb (16739.9 kg) |
| Total – Loaded | 114860 lb (52099.7 kg) |
Sound Levels
| Interior Cab | 76 dB(A) |
Turning Circle
| Note | Dimensions are for machines equipped with 23.5R25 tires. |
| Turning Dimensions – Steer Angle – Left/Right | 45 degrees |
| Turning Dimensions – Sae Turning Radius | 294 in (7467.6 mm) |
| Turning Dimensions – Clearance Radius | 318 in (8077.2 mm) |
| Turning Dimensions – Inside Radius | 153 in (3886.2 mm) |
| Turning Dimensions – Aisle Width | 210 in (5334 mm) |
Body Capacities
| Heaped (Sae 2:1) | 23 yd3 (17.6 m3) |
| Struck | 17.4 yd3 (13.4 m3) |
| Tailgate Struck | 18.2 yd3 (14 m3) |
| Tailgate Heaped Sae 2:1 | 24.6 yd3 (18.9 m3) |
Body Hoist
| Raise Time | 12 s |
| Lower Time | 8 s |
Body Plate
| Body Plate Type | High Strength Brinell HB450 Wear Resistant Steel |
