Contents
Dump
| Rated Payload | 68343.22 lb (30999.97 kg) |
Engine Details
| Displacement | 762.8 cu in (12.6 L) |
| Bore | 5.1 in (129.6 mm) |
| Stroke | 6.2 in (157.5 mm) |
| Emissions | The 730C2 EJ meets Tier 4 Final/Stage IV emission standards. |
| Net Power – Sae J1349 | 367 hp (273.7 kw) |
| Gross Power – Sae J1995 | 375 hp (279.7 kw) |
| Engine Model | Cat C13 ACERT |
| Net Power – Iso 14396 | 370 hp (276 kw) |
| Note (1) | The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage IV, Japan 2014 (Tier 4 Final), as well as Korea Tier 4. |
| Note (2) | The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard. |
| Note (3) | The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. |
| Note (4) | Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions. |
| Note (5) | DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications. |
| Peak Engine Torque Gross (Sae J1995) | 1579 lb ft (2140.9 Nm) |
| Peak Engine Torque Speed | 1200 rpm |
| Engine Model – U.S. Epa Tier 4 Final/Eu Stage Iv | Cat C13 ACERT |
| Peak Engine Torque Net (Sae J1349) | 1564 lb ft (2120.5 Nm) |
| No Engine De-Rating Below | 12500 ft in (3810 m) |
Transmission
| Forward – 1 | 5 mph (8.1 km/h) |
| Forward – 2 | 9 mph (14.5 km/h) |
| Forward – 3 | 14 mph (22.6 km/h) |
| Forward – 4 | 21 mph (33.8 km/h) |
| Forward – 5 | 29 mph (46.7 km/h) |
| Forward – 6 | 34 mph (54.8 km/h) |
| Reverse – 1 | 6 mph (9.7 km/h) |
Steering
| Lock To Lock | 4.75 seconds @ 60 rpm |
Service Refill Capacities
| Cooling System | 21.9 gal (83 L) |
| Fuel Tank Capacity | 108.8 gal (411.9 L) |
| Def Tank | 5.2 gal (19.7 L) |
| Engine Crankcase | 10 gal (37.9 L) |
| Transmission | 12.4 gal (47 L) |
| Hydraulic System | 29.1 gal (110.2 L) |
| Final Drives/Differential | 33 gal (125 L) |
| Output Transfer Gear Box | 6.3 gal (23.9 L) |
Standards
| Cab – Fops | ISO 3449 Level II 2005 |
| Cab – Rops | ISO 3471 2008 |
| Brakes | ISO 3450 2011 |
| Steering | ISO 5010 2007 |
Operating Weights
| Front Axle – Empty | 34535 lb (15664.9 kg) |
| Center Axle – Empty | 12103 lb (5489.9 kg) |
| Rear Axle – Empty | 11552 lb (5239.9 kg) |
| Total – Empty | 58190 lb (26394.6 kg) |
| Front Axle – Rated Load | 7231 lb (3280 kg) |
| Center Axle – Rated Load | 27249 lb (12360 kg) |
| Rear Axle – Rated Load | 27249 lb (12360 kg) |
| Total – Rated Load | 61729 lb (27999.9 kg) |
| Front Axle – Loaded | 36013 lb (16335.3 kg) |
| Center Axle – Loaded | 42362 lb (19215.1 kg) |
| Rear Axle – Loaded | 41811 lb (18965.2 kg) |
| Total – Loaded | 120186 lb (54515.5 kg) |
Sound Levels
| Interior Cab | 76 dB(A) |
| Note (1) | The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT 98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed. |
| Note (2) | Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. |
Turning Circle
| Note | Dimensions are for machines equipped with 750/65 tires. |
| Turning Dimensions – Sae Turning Radius | 294 in (7467.6 mm) |
| Turning Dimensions – Clearance Radius | 318 in (8077.2 mm) |
| Turning Dimensions – Inside Radius | 153 in (3886.2 mm) |
| Turning Dimensions – Aisle Width | 210 in (5334 mm) |
Body Capacities
| Heaped (Sae 2:1) | 22.1 yd3 (16.9 m3) |
| Struck | 17.7 yd3 (13.6 m3) |
Body Plate
| Body Plate Type | High strength Brinell HB450 wear resistant steel |
Body Eject
| Eject Time | 12 s |
| Retract Time | 15 s |
