CAT 416C Backhoe Loader

Backhoe

Load Height – Std 11.43 ft in (3483 mm)
Dig Depth – Std 14.51 ft in (4420 mm)
Reach At Load Height – Std 5.79 ft in (1764 mm)
Bucket Dig Force – Std 11700 lb (5307.04 kg)
Bucket Rotation 43 degrees
Stick Dig Force – Standard 9894 lb (4487.85 kg)
Bucket Dig Force – Ext 12065 lb (5472.6 kg)
Bucket Dig Force – Standard 3000 lb (1360.78 kg)
Dig Depth – Ext 18.2 ft in (5545 mm)
Dig Depth – Standard 14.5 ft in (4.42 m)
E-Stick Extended (1) 18.16 ft in (5.54 m)
E-Stick Extended (2) 21.9 ft in (6.68 m)
E-Stick Extended (3) 7836 lb (3554.36 kg)
E-Stick Extended (4) 18.5 lb (8.4 kg)
E-Stick Extended (5) 5780 lb (2621.77 kg)
E-Stick Retracted (1) 18.68 ft in (5.7 m)
E-Stick Retracted (2) 7704 lb (3494.48 kg)
E-Stick Retracted (3) 8839 lb (4009.31 kg)
E-Stick Retracted (4) 5.83 lb (2.65 kg)
Load Height – Ext 13.86 ft in (4223 mm)
Reach At Load Height – Ext 8.88 ft in (2706 mm)
Reach From Swing Pivot – Standard 18.5 ft in (5.64 m)
Stick Lift At 2440 Mm (8 Ft) – Standard 11.42 lb (5.19 kg)

Dimensions

Transport Length 22.91 ft in (6980 mm)
Transport Width 7.72 ft in (2352 mm)
Transport Height 11.77 ft in (3585 mm)
Wheelbase 6.89 ft in (2100 mm)
Ground Clearance 0.98 ft in (297 mm)
Height To Top Of Suspended Cab 9.09 ft in (2770 mm)

Loader

Reach At Max Dump Height 2.4 ft in (730 mm)
Dig Depth 4.14 in (105 mm)
Bucket Capacity – General Purpose 8.66 yd3 (6.63 m3)
Dump Height At Maximum Angle – Single Tilt 4 ft in (1.22 m)
Dump Reach At Maximum Angle – Single Tilt 89 ft in (27.13 m)
Lift Capacity At Full Height 5780 lb (2621.77 kg)
Bucket Width – General Purpose 2.42 ft
Bucket Capacity 1 yd3 (0.76 m3)
Bucket Width 89.06 in (2262 mm)
Bucket Breakout Force – Single Tilt 35.42 lb (16.07 kg)
Dig Depth – Single Tilt 1.25 in (31.75 mm)
Bucket Breakout Force 9030 lb (40.17 kN)

Engine Details

Number Of Cylinders 4
Engine Make CAT
Engine Model 3054 DIT
Net Power 75 hp (56 kw)
Gross Power 78 hp (58.2 kw)
Power Measured @ 2200 rpm
Displacement 244.1 cu in (4 L)
Net Power – Sae J1349 75 hp (56 kw)
Gross Power – Sae J1995 78 hp (58.2 kw)
Engine Model – Standard Cat 3054T Diesel Engine
Gross Power – Optional – Sae J1995 84 hp (62.7 kw)

Operational Specs

Operating Weight 2wd 13960 lb (6332.2 kg)
Fuel Tank Capacity 33.9 gal (128 L)
Tire Size Front – 2wd / 4wd 11L-16, 12PR, F3
Rear Tires Size 2wd/4wd 16.9-24, 10 PR, R4

Transmission

Number Of Forward Gears 4
Number Of Reverse Gears 4
Max Speed – Forward 20.4 mph (32.9 km/h)
Max Speed Reverse 20.4 mph (32.9 km/h)

Weights

Operating Weight – Maximum 21389 lb (9701.9 kg)
Operating Weight – Nominal 13892 lb (6301.4 kg)

Hydraulic

Pump Flow Capacity 43.1 gal/min (163 L/min)

Hydraulic System

Pump Type Variable flow, axial piston
Circuit Type Closed center
System Pressure 3002.28 psi

Axle Ratings

Rear Axle – Static 61222.3 lb (27770 kg)
Front Axle (2wd) – Static 30313.6 lb (13750 kg)
Dynamic (1) 6982.1 lb (3167 kg)
Dynamic (2) 20414.8 lb (9260 kg)

Service Refill

Fuel Tank Capacity 33.9 gal (128 L)
Engine Oil – With Filter 2 gal (7.4 L)
Rear Axle 6.4 gal (24 L)
Front Axle (4wd) 2 gal (7.5 L)
Hydraulic System 20.9 gal (79.1 L)
Hydraulic Tank 10.1 gal (38.1 L)
Ask a question