Home » Backhoe Loaders » Mecalac Backhoe Loaders » Mecalac TLB840R Backhoe Loader

Mecalac TLB840R Backhoe Loader

Contents
  1. Backhoe
  2. Dimensions
  3. Loader
  4. Engine Details
  5. Operational Specs
  6. Transmission
  7. Hydraulic

Backhoe

Load Height – Std 11.71 ft in (3569 mm)
Reach From Swivel – Std 18.69 ft in (5695 mm)
Dig Depth – Std 14.48 ft in (4411 mm)

Dimensions

Hinge Pin Height, Maximum Height 133.9 in (3401 mm)
Dump Angle 45
Reach @ Ground Level 5003.29 ft in (1525 m)
Loading Height (Evw) 10.32 ft in (3145 mm)

Loader

Lift Capacity At Full Height 8287.93 lb (3759.34 kg)
Bucket Capacity 3679.99 yd3 (2813.55 m3)
Bucket Breakout Force 9441.98 lb (42 kN)

Engine Details

Number Of Cylinders 4
Engine Model TCD 3.6 L4
Net Power 69.9 hp (52.2 kw)
Gross Power 74 hp (55.2 kw)
Power Measured @ 2200 rpm
Torque Measured @ 1300 rpm
Displacement 219.7 cu in (3.6 L)
Alternator 95 amps

Operational Specs

Operating Weight 16137.9 lb (7320 kg)
Fuel Tank Capacity 37 gal (140 L)
Cooling System Fluid Capacity 4.5 gal (17 L)
Front Axle Fluid Capacity 1.9 gal (6.9 L)
Rear Axle Fluid Capacity 4.6 gal (17.1 L)
Operating Voltage 12 V

Transmission

Number Of Forward Gears 4
Number Of Reverse Gears 4

Hydraulic

Pump Flow Capacity 22 gal/min (83 L/min)
Relief Valve Pressure 3626 psi (25000.4 kPa)
Ask a question

You may also like
Kubota Excavator Error Codes FAQ
Kubota 4
Kubota Excavator Error Codes / Fault DTCs
Kubota excavators are equipped with advanced diagnostic systems designed to monitor various components and
Massey Ferguson Dash Control Center / DCC / Instrument Panel
Massey Ferguson 4
Massey Ferguson Error Codes List / MF Fault DTCs
Massey Ferguson Diagnostic Trouble Codes (DTCs) are alphanumeric codes generated by the onboard diagnostic
New Holland Instrument Control Unit Error Codes
CNH Industrial 0
Case IH & New Holland Instrument Control Unit / ICU / EIC Error Codes
In the world of modern farming machinery, the Instrument Control Unit (ICU) is the
New Holland and Case IH Tractor Multifunction Controller Errors
CNH Industrial 0
New Holland & Case IH Tractor Multifunction Controller Errors
Modern tractors have transformed into intricate systems powered by multifunction controllers. These controllers are
JLG DTCs for MEWPs, Boom Lifts and Telehandlers
Error Codes 0
JLG Error Codes List – Diagnostic Fault / Trouble Codes (DTCs) for MEWPs / Lifts / Telehandlers
Effective troubleshooting and timely maintenance of JLG mobile elevating work platforms (MEWPs) and telehandlers
John Deere X495 Front End Loader attachment
John Deere 0
John Deere X495 Attachments (Specs)
The John Deere X495 Lawn Tractor stands as a reliable workhorse in the realm