Case IH SB541 Baler


Baler Pickup

Windguard Description 13 rods
Standard Pickup Lift Manual
Sweep Width Inside 74.81 in (1900 mm)
Sweep Width On Flare 79.93 in (2030 mm)
Tine Spacing 2.64 in (67 mm)
Width Between Outside Tines 67.49 in (1714 mm)
Number Of Tine Bars 6
Number Of Tines 156
Optional Pickup Lift Hydraulic
Pickup Position Offset to right side
Pickup Protection V-belt slippage & lost motion reel drive

Dimensions

Length Without Bale Chute 205 in (5207 mm)
Max. Height 70.99 in (1803 mm)
Tractor PTO Power Required 75 hp (55.93 kw)
Width 10 ft in (3048 mm)
Length With Bale Chute 247.01 in (6274 mm)

Tying Mechanism

Tying Mechanism Type Knotter
Tying Twine Capacity 8 balls
Tying Wire Capacity No wire

Maindrive

Flywheel Diameter 22.1 in (559 mm)
Flywheel Weight 247 lb (112 kg)
PTO Driveline Std three-joint, Category 6
PTO Speed 540 rpm
Main Drive Protection Shearbolt, overrunning & slip clutches

Sales Literature

Literature Number CIH7180801
Literature Date July, 2008
Document Number 86624842
Document Date 10/1/2001

Years Of Manufacture

Manufacturing Status Current
First Entry Date 8/21/2008
Revision Date 2/27/2012

Bale Size

Bale Cross Section,Height X Width(In,Mm) 14 x 18 (356 x 457)
Bale Length Range (In,Mm) 12 to 52 (305 to 1321)
Density Control, Standard Adj spring loaded tension rails
Density Control, Optional No option
Bale Thrower Compatible BTX11 available (80 lb bale)

Feeding

Feeder Description Rotary feeder w/ packer
Feeder Opening Sq In (Sq Cm) 283 (1826), right side entry

Weights

Weight With Twine Tie 3714.8 lb (1685 kg)

Tires

Standard Tireleft 31 x 13.50 – 15, 6PR
Standard Tire Right 27 x 9.50 – 15, 6PR

Weights

Weight With Wire Tie 3851.5 lb (1747 kg)

Plunger

Plunger Speed (Strokes/Min) 79
Plunger Stroke 30 in (762 mm)
Ask a question