Contents
Dimensions (Approximate)
| Ground Clearance | 1.23 ft in (0.38 m) |
| Ground Clearance – Bumper | 2.19 ft in (0.67 m) |
| Height – Top Of Beacon | 12.95 ft in (3.95 m) |
| Height – Top Of Cab Roof | 11.98 ft in (3.66 m) |
| Height – Top Of Exhaust Pipe | 10.97 ft in (3.35 m) |
| Height – Top Of Hood | 8.42 ft in (2.57 m) |
| Hitch To Centerline Of Front Axle | 5.5 ft in (1.68 m) |
| Length – With Blade On Ground | 23.48 ft in (7.16 m) |
| Width – Over Wheels | 10.64 ft in (3.25 m) |
| Wheel Base | 10.99 ft in (3.35 m) |
| Centerline Of Rear Axle To Bumper | 6.53 ft in (2 m) |
| Turning Radius – Inside Of Push Arms | 8.27 ft in (2.53 m) |
Operating Specifications
| Maximum Operating Weight (Tier 3/Stage Iiia Equivalent) | 48740 lb (22108.1 kg) |
| Maximum Operating Weight (Tier 4 Final/Stage Iv) | 49353 lb (22386.15 kg) |
Engine Details
| Net Power | 248 hp (185 kw) |
| Displacement | 427.8 cu in (7.1 L) |
| Bore | 4.1 in (104.2 mm) |
| Stroke | 5.3 in (134.7 mm) |
| Emissions | Meets U.S. EPA Tier 4 Final/EU Stage IV emission standards or meets U.S. EPA Tier 3/EU Stage IIIA equivalent emission standards |
| Engine Model | Cat C7.1 ACERT: configured for two emissions options |
| Rated Power (Sae J1349) – Tier 4 Final/Stage Iv | 248 hp (185 kw) |
| Rated Power (Net Iso 9249) – Tier 4 Final/Stage Iv | 248 hp (185 kw) |
| Gross Power – Sae J1995 – Tier 3/Stage Iiia Equivalent | 286 hp (213.3 kw) |
| Rated Power (Net Iso 9249) – Tier 3/Stage Iiia Equivalent | 249 hp (185.7 kw) |
| Maximum Net Torque – 1,400 Rpm – Tier 4 Final/Stage Iv | 899 lb ft (1218.9 Nm) |
| Rated Power (Sae J1349) – Tier 3/Stage Iiia Equivalent | 249 hp (185.7 kw) |
| Gross Power – Sae J1995 – Tier 4 Final/Stage Iv | 284 hp (211.8 kw) |
| Gross Power – Iso 14396 – Tier 4 Final/Stage Iv | 274 hp (204.4 kw) |
| High Idle Speed | 2270 rpm |
| Low Idle Speed | 800 rpm |
| Torque Rise – Tier 4 Final/Stage Iv | 52% |
| Gross Power – Iso 14396 – Tier 3/Stage Iiia Equivalent | 275 hp (205.1 kw) |
| Torque Rise – Tier 3/Stage Iiia Equivalent | 26% |
| Maximum Net Torque – 1,400 Rpm – Tier 3/Stage Iiia Equivalent | 749 lb ft (1015.6 Nm) |
| Maximum Altitude – Without Derating | 9842.6 ft in (3000.1 m) |
Operational Specs
| Operating Weight | 49353 lb (22386.2 kg) |
Transmission
| Transmission Type | Planetary Powershift ECPC |
| Travel Speeds – Forward – First | 4.2 mph (6.8 km/h) |
| Travel Speeds – Forward – Second | 7.5 mph (12.1 km/h) |
| Travel Speeds – Reverse – First | 4.8 mph (7.8 km/h) |
| Travel Speeds – Reverse – Second | 8.5 mph (13.7 km/h) |
| Travel Speeds – Forward – Third | 13.2 mph (21.3 km/h) |
| Travel Speeds – Reverse – Third | 15 mph (24.2 km/h) |
Wheels
| Outside Diameter | 4.7 ft in (1.5 m) |
| Drum Diameter | 3.4 ft in (1.1 m) |
| Drum Width | 3.3 ft in (1 m) |
| Tips Per Wheel | 60 |
| Weight | 9720 lb (4409 kg) |
| Width – Over Drums | 10.7 ft in (3.3 m) |
Axles
| Front | Planetary Fixed |
| Rear | Planetary Oscillating |
| Oscillation Angle | 10 degrees |
Hydraulic System
| Maximum Supply Pressure | 2930 psi |
| Main Relief Pressure | 3190 psi |
| Pump Flow At 2,111 Rpm | 23.5 gal/min |
| Lift Cylinder, Double Acting – Bore And Stroke | 101.6 mm 627 mm (4 in 24.7 in) |
| Tilt Cylinder, Double Acting – Bore And Stroke | 101.6 mm 167 mm (4 in 6.6 in) |
Brakes
| Parking Brake | Drum and Shoe, Spring Applied, Hydraulic Released |
Service Refill Capacities
| Fuel Tank Capacity | 132.1 gal (500.1 L) |
| Engine Crankcase | 5.3 gal (20.1 L) |
| Transmission | 14.8 gal (56.1 L) |
| Differential – Final Drives – Front | 17.2 gal (65.2 L) |
| Differential – Final Drives – Rear | 17.2 gal (65.2 L) |
| Note | All non-road Tier 4 Final and Stage IV diesel engines are required to use: Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm for EPA and 10 ppm for EU (mg/kg) sulfur or less. Biodiesel blends up to B20 are acceptable when blended with 15 ppm for EPA and 10 ppm for EU (mg/kg) sulfur or less ULSD and when the biodiesel feedstock meets ASTM D7467 specifications. Cat DEO-ULS or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specifications are required. Diesel Exhaust Fluid (DEF) that meets all requirements defined in ISO 22241-1. |
| Cooling System – Tier 4 Final/Stage Iv | 21.4 gal (81.1 L) |
| Diesel Exhaust Fluid Tank (Tier 4 Final/Stage Iv Only) | 4.2 gal (15.9 L) |
| Hydraulic Tank Only | 19.8 gal (75 L) |
| Cooling System – Tier 3/Stage Iiia Equivalent | 19.3 gal (73.1 L) |
Hydraulic System – Steering
| Steering System – Circuit | Closed Center Load Sensing |
| Steering System – Pump | Piston Variable Displacement |
| Steering Pressure Limited | 4003 psi |
| Bore | 4 in (101.6 mm) |
| Stroke | 23.5 in (596.9 mm) |
| Maximum System Flow | 147 L/min @ 2,111 rpm (38.8 gal/min @ 2,111 rpm) |
| Vehicle Articulation Angle | 84 degrees |
Blades
| Height – Including Cutting Edge | 2.9 ft in (0.9 m) |
| Maximum Depth Of Cut | 0.8 ft in (0.3 m) |
| Maximum Lift Above Ground | 2.7 ft in (0.9 m) |
| Width – Over End Bits | 12.4 ft in (3.8 m) |
| Blade Tilt Angle – Right – Hydraulic | 4.8 degrees |
| Blade Tilt Angle – Left – Hydraulic | 5.5 degrees |
| Blade Tilt Adjustment – Right | 1 ft in (0.4 m) |
| Blade Tilt Adjustment – Left | 1.2 ft in (0.4 m) |
| Total Tilt Adjustment | 2.2 ft in (0.7 m) |
| Width – Moldboard Length | 12 ft in (3.7 m) |
Cab – Standard
| Machine Sound Level (Iso 6395) Tier 3/Stage Iiia Equivalent | 112 dB(A) |
| Operator Sound Level – Iso 6396 | 71 dB(A) |
| Machine Sound Level (Iso 6395) Tier 4/Stage Iv | 111 dB(A) |
Cab – Suppression
| Operator Sound Level – Iso 6396 | 70 dB(A) |
| Machine Sound Level (Iso 6395) Tier 4/Stage Iv | 109 dB(A) |
| Machine Sound Level (Iso 6395) Tier 3/Stage Iiia Equivalent | 110 dB(A) |
