Contents
Dimensions
| Length With Blade On Ground | 27.71 ft in (8443 mm) |
| Ground Clearance | 1.4 ft in (426.72 mm) |
| Width Over Wheels | 11.98 ft in (3650 mm) |
| Height To Top Of Cab | 12.32 ft in (3755 mm) |
| Wheelbase | 12.14 ft in (3700 mm) |
| Drum Width | 44.29 in (1124.97 mm) |
| Height – Bottom Of Ladder | 1.6 ft in (0.49 m) |
| Height – Rear Bumper | 3.1 ft in (0.95 m) |
| Height – Top Of Cab | 12.3 ft in (3.75 m) |
| Height – Top Of Exhaust Pipe | 144 in (3657.6 mm) |
| Blade Height – Straight | 3.39 ft in (1.04 m) |
| Length – With Blade On Ground | 27.7 ft in (8.45 m) |
| Wheel Base | 12.1 ft in (3.69 m) |
| Height – Top Of Hood | 105.6 in (2682.24 mm) |
| Blade Width – Straight | 14.4 ft in (4.39 m) |
| Centerline Of Rear Axle To Edge Of Counterweight | 105.6 in (2682.24 mm) |
| Centerline Of Rear Axle To Edge Of Rear Bumper | 8.81 ft in (2.69 m) |
| Centerline Of Rear Axle To Hitch | 73.2 in (1859.28 mm) |
| Width – Over Drums | 11.98 ft in (3.66 m) |
| Width – Over End Bits | 15.2 ft in (4.64 m) |
Operating Specifications
| Turning Radius Blade – Outside | 24.3 ft in (7.41 m) |
| Turning Radius Blade – Inside | 11 ft in (3.36 m) |
Fuel Tank
| Fuel Tank Capacity | 159.3 gal (603.1 L) |
Engine Details
| Engine Make | CAT |
| Engine Model | C15 |
| Gross Power | 401 hp (299.1 kw) |
| Net Power | 354 hp (264 kw) |
| Power Measured @ | 1800 rpm |
| Displacement | 928 cu in (15.3 L) |
| Bore | 5.4 in (137.2 mm) |
| Stroke | 6.7 in (170.2 mm) |
| Engine Model | Cat C15 ACERT |
| Flywheel Power | 354 hp (264 kw) |
| Eec 80/1269 | 354 hp (264 kw) |
| Sae J1349 | 350 hp (261 kw) |
| Iso 9249 | 354 hp (264 kw) |
Operational Specs
| Operating Weight | 72166.2 lb (32734 kg) |
| Fuel Tank Capacity | 159.3 gal (603 L) |
| Engine Oil Capacity | 9 gal (34 L) |
| Cooling System Fluid Capacity | 22 gal (83 L) |
| Transmission Fluid Capacity | 16.4 gal (62 L) |
| Operating Voltage | 24 V |
| Alternator Supplied Amperage | 95 amps |
Transmission
| Number Of Forward Gears | 3 |
| Number Of Reverse Gears | 3 |
| Max Speed | 10.7 mph (17.2 km/h) |
| Forward – 1 | 3.3 mph (5.4 km/h) |
| Forward – 2 | 5.8 mph (9.4 km/h) |
| Forward – 3 | 9.7 mph (15.7 km/h) |
| Reverse – 1 | 3.8 mph (6.2 km/h) |
| Reverse – 2 | 6.6 mph (10.7 km/h) |
| Reverse – 3 | 10.7 mph (17.3 km/h) |
Wheels
| Front Wheels Drum Width | 44.3 in (1125 mm) |
Weights
| Operating Weight | 72164 lb (32733.1 kg) |
Wheels
| Front Wheels Drum Diameter | 51.2 in (1299 mm) |
| Rear Wheels Drum Width | 44.3 in (1125 mm) |
| Rear Wheels Drum Diameter | 51.2 in (1299 mm) |
| Outside Diameter | 5.5 ft in (1.7 m) |
| Drum Diameter | 4.3 ft in (1.4 m) |
| Drum Width | 3.7 ft in (1.2 m) |
| Wheel Weight | 3893 lb (1765.9 kg) |
Hydraulic System
| Relief Valve Setting | 3500 psi |
Blade
| Height | 40.8 in (1034 mm) |
| Width | 14.5 ft in (4390 mm) |
Axles
| Front | Fixed |
| Rear | Oscillating 9 |
Hydraulic System
| Lift Cylinder Bore X Stroke | 95.25 mm x 711 mm (3.7 in x 28 in) |
Brakes
| Standards | Meet SAE/ISO 3450:1996 |
Service Refill Capacities
| Cooling System | 21.9 gal (83 L) |
| Fuel Tank Capacity | 159 gal (601.9 L) |
| Crankcase | 9 gal (34.1 L) |
| Transmission | 16.4 gal (62.1 L) |
| Differential – Final Drives – Front | 23.8 gal (90.1 L) |
| Differential – Final Drives – Rear | 23.8 gal (90.1 L) |
Cab
| Rops/Fops | Meets SAE and ISO standards |
Sound Performance
| Standards | Meets ANSI/SAE, SAE and ISO requirements |
Blades
| Blade Tip Angle – Total | 13.5 degrees |
| Blade Tilt Angle – Right – Mechanical | 4.3 degrees |
| Blade Tilt Angle – Left – Mechanical | 4.3 degrees |
| Moldboard – Length | 14.4 ft in (4.4 m) |
| Height – Including Cutting Edge | 3.4 ft in (1.1 m) |
| Maximum Depth Of Cut | 1.1 ft in (0.4 m) |
| Maximum Lift Above Ground | 3.1 ft in (1 m) |
| Width – Over End Bits | 15.2 ft in (4.7 m) |
| Blade Tilt Angle – Right – Hydraulic | 5.6 degrees |
| Blade Tilt Angle – Left – Hydraulic | 5.6 degrees |
| Total Tilt Adjustment | 2.6 ft in (0.8 m) |
| Blade Tip Angle – Back | 6.6 degrees |
| Blade Tip Angle – Forward | 6.9 degrees |
| Blade Tilt Angle – Right Full | 10 degrees |
| Blade Tilt Angle – Left Full | 10 degrees |
Shipping Specifications
| Weight | 68796 lb (31205.4 kg) |
| Height | 12.4 ft in (3.8 m) |
| Width | 14.4 ft in (4.4 m) |
