Contents
Dimensions
| Ground Clearance | 1.55 ft in (469.9 mm) |
| Maximum Rollback/Dump – Fully Raised | 52 degrees/53 degrees |
| Overall Machine Height – Bucket Fully Raised | 212.7 in (5402.58 mm) |
| Overall Machine Length* | 275.61 in (7000.24 mm) |
| Overall Machine Width Without Bucket: With Standard Tracks – 550 Mm (21.6 In) Shoes | 94.5 in (2400.31 mm) |
| Ramp Angle | 29 degrees |
| Reach At Full Lift Height And 45 Degrees Dump* | 54 in (1371.6 mm) |
| Note | *With General Purpose bucket and extra duty teeth. |
| Bucket Height – Carry Position | 18 in (457.2 mm) |
| Carry Position Approach Angle | 15 degrees |
| Clearance At Full Lift Height And 45 Degrees Dump* | 114.8 in (2915.92 mm) |
| Digging Depth* | 5.4 in (137.16 mm) |
| Grading Angle | 63 degrees |
| Machine Height – Top Of Cab | 130.9 in (3324.86 mm) |
| Maximum Rollback – Ground/Carry Position | 43 degrees/50 degrees |
| Height – Bucket Hinge Pin | 155.1 in (3939.54 mm) |
| Height – Top Of Stack | 115.7 in (2938.78 mm) |
Undercarriage
| Track Gauge | 6.07 ft in (1849.12 mm) |
| Track Shoe Width – Standard | 22 in (558.8 mm) |
| Ground Contact Area – Optional Shoe | 4013 in2 (2.59 m2) |
| Ground Contact Area – Standard Shoe | 4900 in2 (3.17 m2) |
| Ground Pressure – Optional Shoe | 11 psi |
| Ground Pressure – Standard Shoe | 9 psi |
| Ground Pressure(1) – Optional Shoe | 11.1 psi |
| Ground Pressure(1) – Standard Shoe | 9.1 psi |
| Grouser Height – Double Grouser | 1.65 in (41.91 mm) |
| Track On Ground | 100 in (2540 mm) |
| Track Rollers/Shoes – Each Side | Jul-38 |
| Track Shoe Width – Optional | 18 in (457.2 mm) |
| Note | (1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology. |
Engine Details
| Emissions | U.S. EPA Tier 4 Final/EU Stage IV, China Nonroad Stage III, equivalent to Tier 3/Stage IIIA |
| Engine Model | Cat C7.1 ACERT |
| Flywheel Power | 193 hp (144 kw) |
| Note (1) | All nonroad Tier 4 Interim and Final, Stage IIIB and IV and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) with 15 ppm (mg/kg) of sulfur or less, or up to B20 biodiesel blended with ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations. |
| Note (2) | Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. |
| Net Power – Iso 9249/Sae J1349 (Din) | 196 hp (146.2 kw) |
| Net Power – Iso 9249/Sae J1349 | 193 hp (144 kw) |
Operational Specs
| Operating Weight | 44138 lb (20020.7 kg) |
Weights
| Note | (1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology. |
| Operating Weight(1) | 44771 lb (20307.8 kg) |
Buckets
| Capacity – General Purpose | 3.2 yd3 (2.5 m3) |
| Capacity – Multi-Purpose | 2.6 yd3 (2 m3) |
| Capacity – Performance Series | 3.7 yd3 (2.9 m3) |
| Width – General Purpose | 102.8 in (2611.2 mm) |
| Width – Performance Series | 106.8 in (2712.8 mm) |
| Width – Multi-Purpose | 101.3 in (2573.1 mm) |
Service Refill Capacities
| Fuel Tank Capacity | 84.5 gal (319.9 L) |
| Note | (1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology. |
| Def Tank(1) | 4.3 gal (16 L) |
Air Conditioning System
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.1 kg of refrigerant which has a CO2 equivalent of 1.573 metric tonnes. |
