Case 420CT Series 3 Compact Track Loader


Dimensions

Width Over Tracks 5.42 ft in (1651 mm)
Height To Top Of Cab 6.63 ft in (2020 mm)
Ground Clearance 8.39 in (213 mm)
Clearance At Max Lift And Dump 7.94 ft in (2420 mm)
Reach At Max Lift And Dump 2.07 ft in (630 mm)
Turning Radius From Center – Inc Bucket 80.71 in (2050 mm)
Turning Radius From Center – Machine Rear 57.09 in (1450 mm)
Length With Bucket 10.8 ft in (3290 mm)
Length With Out Bucket 8.54 ft in (2600 mm)

Undercarriage

Length Of Track On Ground 4.72 ft in (1438 mm)
Ground Contact Area 1424 in2 (0.92 m2)
Number Of Track Rollers Per Side 3
Width Of Track 12.6 in (320 mm)
Ground Pressure 5.8 psi (39.99 kPa)

Engine Details

Number Of Cylinders 4
Engine Make Case
Engine Model 432T/M3
Gross Power 74 hp (55.2 kw)
Net Power 69 hp (51.5 kw)
Power Measured @ 2500 rpm
Peak Torque 203 lb ft (275.3 Nm)
Torque Measured @ 1400 rpm
Displacement 195 cu in (3.2 L)
Aspiration Turbocharged

Operational Specs

Operating Weight 8340 lb (3783 kg)
Cooling System Fluid Capacity 3.1 gal (11.4 L)
Fuel Tank Capacity 22 gal (83.3 L)
Engine Oil Capacity 2.3 gal (8.5 L)
Hydraulic System Fluid Capacity 13.2 gal (50 L)
Operating Voltage 12 V
Alternator Supplied Amperage 95 amps
Max Speed – Low Range 5.8 mph (9.4 km/h)
Max Speed – High Range 8.4 mph (13.6 km/h)

Loader

Operating Load 2860 lb (1297.3 kg)
Tipping Angle 5715 degrees
Bucket Capacity 0.6 yd3 (0.5 m3)

Hydraulic

Pump Type Gear
Pump Flow 23.8 gal/min (90 L/min)
Ask a question