Case 445CT Series 3 Compact Track Loader


Dimensions

Width Over Tracks 6.93 ft in (2112 mm)
Height To Top Of Cab 6.93 ft in (2110 mm)
Ground Clearance 11.15 in (283 mm)
Clearance At Max Lift And Dump 7.32 ft in (2230 mm)
Reach At Max Lift And Dump 3.38 ft in (1030 mm)
Turning Radius From Center – Inc Bucket 92.13 in (2340 mm)
Turning Radius From Center – Machine Rear 55.12 in (1400 mm)
Length With Bucket 11.29 ft in (3440 mm)
Length With Out Bucket 8.7 ft in (2650 mm)

Undercarriage

Length Of Track On Ground 1638 ft in (499262.4 mm)
Ground Contact Area 2293 in2 (1.48 m2)
Number Of Track Rollers Per Side 4
Width Of Track 17.72 in (450 mm)
Ground Pressure 4.3 psi (29.65 kPa)

Engine Details

Number Of Cylinders 4
Engine Make Case
Engine Model 432T/M3
Gross Power 82 hp (61.2 kw)
Net Power 77 hp (57.5 kw)
Power Measured @ 2500 rpm
Peak Torque 229 lb ft (310.5 Nm)
Torque Measured @ 1400 rpm
Displacement 195 cu in (3.2 L)
Aspiration Turbocharged

Operational Specs

Operating Weight 10200 lb (4626.7 kg)
Cooling System Fluid Capacity 3.1 gal (11.4 L)
Fuel Tank Capacity 17.3 gal (65.5 L)
Engine Oil Capacity 2.3 gal (8.5 L)
Hydraulic System Fluid Capacity 11 gal (41.7 L)
Operating Voltage 12 V
Alternator Supplied Amperage 95 amps
Max Speed – Low Range 5.1 mph (8.3 km/h)
Max Speed – High Range 8 mph (12.9 km/h)

Loader

Operating Load 3300 lb (1496.9 kg)
Tipping Angle 6600 degrees
Bucket Capacity 0.8 yd3 (0.6 m3)

Hydraulic

Pump Type Gear
Pump Flow 23.9 gal/min (90.1 L/min)
Ask a question