Case 450CT Series 3 Compact Track Loader


Dimensions

Width Over Tracks 6.93 ft in (2112 mm)
Height To Top Of Cab 6.96 ft in (2120 mm)
Ground Clearance 11.3 in (287 mm)
Clearance At Max Lift And Dump 7.91 ft in (2410 mm)
Reach At Max Lift And Dump 2.5 ft in (760 mm)
Turning Radius From Center – Inc Bucket 92.13 in (2340 mm)
Turning Radius From Center – Machine Rear 59.85 in (1520 mm)
Length With Bucket 11.72 ft in (3570 mm)
Length With Out Bucket 9.16 ft in (2790 mm)

Undercarriage

Length Of Track On Ground 5.38 ft in (1638 mm)
Ground Contact Area 2293 in2 (1.48 m2)
Number Of Track Rollers Per Side 4
Width Of Track 17.72 in (450 mm)
Ground Pressure 4.8 psi (33.1 kPa)

Engine Details

Number Of Cylinders 4
Engine Make Case
Engine Model 445T/M3
Gross Power 90 hp (67.2 kw)
Net Power 83 hp (61.9 kw)
Power Measured @ 2300 rpm
Peak Torque 288 lb ft (390.5 Nm)
Torque Measured @ 1300 rpm
Displacement 274 cu in (4.5 L)
Aspiration Turbocharged

Operational Specs

Operating Weight 10925 lb (4955.5 kg)
Cooling System Fluid Capacity 3.1 gal (11.4 L)
Fuel Tank Capacity 20.7 gal (78.4 L)
Engine Oil Capacity 3.2 gal (12 L)
Hydraulic System Fluid Capacity 17 gal (64.4 L)
Operating Voltage 12 V
Alternator Supplied Amperage 95 amps
Max Speed – Low Range 5.1 mph (8.3 km/h)
Max Speed – High Range 8 mph (12.9 km/h)

Loader

Operating Load 3857 lb (1749.6 kg)
Tipping Angle 7714 degrees
Bucket Capacity 0.8 yd3 (0.6 m3)

Hydraulic

Pump Type Gear
Pump Flow 22 gal/min (83 L/min)
Ask a question