Contents
- Blades
- Dimensions
- Undercarriage
- Ripper
- Engine Details
- Operational Specs
- Transmission
- Weights
- Service Refill Capacities
- Standards
- Hydraulic Controls – Main Relief Valve
- Hydraulic Controls – Pump
- Winch
- Engine – Std
- Engine – Xl/Lgp
- Engine – Xl/Xw/Lgp
- Hydraulic Controls – Maximum Operating Pressure (Non-Vpat)
- Hydraulic Controls – Maximum Operating Pressure (Vpat)
Blades
| Blade Type | N/A |
Dimensions
| Drawbar Height (Center Of Clevis) From Ground Face Of Shoes | 23 in (584.21 mm) |
| Length – Track On Ground | 113.1 in (2872.74 mm) |
Undercarriage
| Ground Pressure | 9.36 psi (64.54 kPa) |
| Grouser Height | 2.6 in (66.05 mm) |
Ripper
| Beam Cross Section | 216 254 mm 8.5 10 in |
| Number Of Pockets | 3 |
| Ripper Type | Fixed Parallelogram |
| Overall Beam Width | 87 in (2209.8 mm) |
| Weight – Each Additional Shank | 163 lb (74 kg) |
| Maximum Penetration | 19.7 in (500.4 mm) |
| Maximum Clearance Raised – Under Tip, Pinned In Bottom Hole | 20.1 in (510.6 mm) |
| Pry-Out Force | 20137 lb (9134 kg) |
| Weight – With One Shank | 3606 lb (1635.7 kg) |
| Maximum Penetration Force | 14557 lb (6603 kg) |
Engine Details
| Gross Power | 213 hp (158.9 kw) |
| Displacement | 537 cu in (8.8 L) |
| Bore | 4.4 in (111.8 mm) |
| Stroke | 5.9 in (149.9 mm) |
| Net Power – Iso 9249 | 185 hp (138 kw) |
| Net Power – Sae J1349 | 183 hp (136.5 kw) |
| Engine Model | Cat C9 ACERT |
| Flywheel Power | 200 hp (149.2 kw) |
| Gross Power – Iso 14396 | 220 hp (164.1 kw) |
| Net Power – Din 70020 | 192 PS |
| Net Power – Caterpillar | 185 hp (138 kw) |
| Net Power – Eu 80/1269 | 185 hp (138 kw) |
Operational Specs
| Operating Weight | 44418 lb (20147.7 kg) |
Transmission
| 2.0 Forward | 3.2 mph (5.2 km/h) |
| 3.0 Forward | 5.3 mph (8.6 km/h) |
| 2.0 Reverse | 4.1 mph (6.6 km/h) |
| 3.0 Reverse | 6.8 mph (11 km/h) |
| 1.5 Forward | 2.4 mph (3.8 km/h) |
| 2.5 Forward | 4.1 mph (6.6 km/h) |
| 1.5 Reverse | 3 mph (4.9 km/h) |
| 2.5 Reverse | 5.3 mph (8.5 km/h) |
| 3.5 Forward | 7.2 mph (11.5 km/h) |
| 3.5 Reverse | 9.1 mph (14.6 km/h) |
Weights
| Shipping Weight | 36974 lb (16771.2 kg) |
| Operating Weight – Xl A | 44795 lb (20318.7 kg) |
| Shipping Weight – Xl A | 37589 lb (17050.1 kg) |
| Operating Weight – Xl Su | 45082 lb (20448.9 kg) |
| Shipping Weight – Xl Su | 37589 lb (17050.1 kg) |
| Operating Weight – Xw A | 47576 lb (21580.2 kg) |
| Shipping Weight – Xw A | 39174 lb (17769.1 kg) |
| Operating Weight – Xw Su | 46961 lb (21301.2 kg) |
| Shipping Weight – Xw Su | 39174 lb (17769.1 kg) |
| Operating Weight – Xw Vpat | 52031 lb (23600.9 kg) |
| Shipping Weight – Xw Vpat | 39591 lb (17958.2 kg) |
| Operating Weight – Lgp S | 48588 lb (22039.2 kg) |
| Shipping Weight – Lgp S | 41471 lb (18811 kg) |
| Operating Weight – Lgp Vpat | 53178 lb (24121.2 kg) |
| Shipping Weight – Lgp Vpat | 40783 lb (18498.9 kg) |
| Shipping Weight – Lgp A | 41471 lb (18811 kg) |
| Operating Weight – Lgp A | 50869 lb (23073.8 kg) |
| Shipping Weight – Std A | 35860 lb (16265.9 kg) |
| Shipping Weight – Std Su | 42834 lb (19429.2 kg) |
| Operating Weight – Xl Vpat | 51041 lb (23151.9 kg) |
| Shipping Weight – Xl Vpat | 38865 lb (17628.9 kg) |
Service Refill Capacities
| Cooling System | 20.3 gal (76.9 L) |
| Fuel Tank Capacity | 112 gal (424 L) |
| Final Drive – Each | 3.6 gal (13.7 L) |
| Hydraulic Tank | 13.6 gal (51.5 L) |
| Engine Crankcase | 7.4 gal (28.1 L) |
| Power Train | 38.5 gal (145.8 L) |
| Pivot Shaft Compartment | 1.3 gal (5 L) |
| Roller Frames – Each | 6.5 gal (24.7 L) |
Standards
| Brakes | Brakes meet criterion SAE J/ISO 10265 MAR99 |
| Rops/Fops | ROPS meets criteria SAE J395, SAE 1040 MAY 94, ISO 3471-1994/FOPS meets ISO 3449-1992 Level II |
| Cab | Meets appropriate standards as listed below. |
Hydraulic Controls – Main Relief Valve
| Pressure Setting – Steering | 6048 psi |
| Pressure Setting – Implement – Non-Vpat | 3147 psi |
| Pressure Setting – Implement – Vpat | 3545 psi |
Hydraulic Controls – Pump
| Lift Cylinder Flow | 49.9 gal/min |
| Ripper Cylinder Flow | 49.9 gal/min |
| Pump Output – Steering | 47.3 gal/min |
| Pump Output – Implement | 49.9 gal/min |
| Tilt Cylinder Flow | 21.1 gal/min |
| Rpm At Rated Engine Speed – Steering | 2625 rpm |
| Angle Cylinder Flow – Vpat | 44.9 gal/min |
| Rpm At Rated Engine Speed – Implement | 1965 rpm |
Winch
| Flange Diameter | 19.8 in (503 mm) |
| Oil Capacity | 17.8 gal (67.4 L) |
| Winch And Bracket Length | 47.6 in (1209.1 mm) |
| Drum Capacity – 22 Mm (0.88 In) | 290 ft in (88.4 m) |
| Drum Diameter | 10 in (254 mm) |
| Drum Width | 13 in (330.2 mm) |
| Winch Case – Width | 38.4 in (975.4 mm) |
| Increased Tractor Length – Std | 20.4 in (518.2 mm) |
| Maximum Bare Drum – Line Pull | 89800 lb (40732.6 kg) |
| Increased Tractor Length – Lgp | 15.6 in (396.3 mm) |
| Drum Capacity – 29 Mm (1.13 In) | 220 ft in (67.1 m) |
| Ferrule Size (O.D. Length) | 54 67 mm 2.10 2.63 in |
| Increased Tractor Length – Xl/Xw | 20.4 in (518.2 mm) |
| Drum Capacity – 25 Mm (1.0 In) | 220 ft in (67.1 m) |
| Weight | 2600 lb (1179.4 kg) |
| Rated Bare Drum Line Pull (2) | 59100 lb (26807.4 kg) |
| Rated Bare Drum Line Pull (1) | 70000 lb (31751.5 kg) |
| Winch Model (1) | PA56 Optional Gearing |
| Recommended Rope (22mm/ 0.88in) | 180 ft in (54.9 m) |
| Optional Rope (25mm/1.0 In) | 163 ft in (49.7 m) |
| Oil Refill Capacity | 17.8 gal (67.4 L) |
| Winch Case – Length | 47.6 in (1209.1 mm) |
| Winch Model (2) | PA56 |
Engine – Std
| Gross Power – Sae J1995 | 213 hp (158.9 kw) |
| Gross Power – Iso 14396 | 204 hp (152.2 kw) |
| Net Power – Sae J1349 | 185 hp (138 kw) |
| Net Power – 80/1269/Eec | 185 hp (138 kw) |
| Bore | 4.4 in (111.8 mm) |
| Displacement | 537 cu in (8.8 L) |
| Engine Emissions | U.S. EPA Tier 3/EUStage IIIA/MLITStep 3 |
| Engine Model | Cat C9 ACERT |
| Net Power – Iso 9249 | 185 hp (138 kw) |
| Stroke | 5.9 in (149.9 mm) |
Engine – Xl/Lgp
| Gross Power – Sae J1995 | 228 hp (170.1 kw) |
| Gross Power – Iso 14396 | 219 hp (163.4 kw) |
| Net Power – Sae J1349 | 200 hp (149.2 kw) |
| Net Power – 80/1269/Eec | 200 hp (149.2 kw) |
| Engine Model | Cat C9 ACERT |
| Engine Emissions | U.S. EPA Tier 3/EUStage IIIA/MLITStep 3 |
| Bore | 4.4 in (111.8 mm) |
| Stroke | 5.9 in (149.9 mm) |
| Displacement | 537 cu in (8.8 L) |
| Net Power – Iso 9249 | 200 hp (149.2 kw) |
Engine – Xl/Xw/Lgp
| Gross Power | 228 hp (170.1 kw) |
| Net Power – Caterpillar | 200 hp (149.2 kw) |
| Net Power – Iso 9249 | 200 hp (149.2 kw) |
| Net Power – Eu 80/1269 | 200 hp (149.2 kw) |
| Net Power – Sae J1349 | 198 hp (147.7 kw) |
| Bore | 4.4 in (111.8 mm) |
| Stroke | 5.9 in (149.9 mm) |
| Displacement | 537 cu in (8.8 L) |
| Net Power – Din 70020 | 207 PS |
| Gross Power – Iso 14396 | 220 hp (164.1 kw) |
Hydraulic Controls – Maximum Operating Pressure (Non-Vpat)
| Bulldozer – Tilt | 2799 psi |
| Bulldozer – Lift | 2799 psi |
| Ripper | 2799 psi |
Hydraulic Controls – Maximum Operating Pressure (Vpat)
| Bulldozer – Angle | 3126 psi |
| Ripper | 2799 psi |
| Bulldozer – Lift | 3126 psi |
| Bulldozer – Tilt | 3126 psi |
