Komatsu D375A-6 Dozer

Dimensions

Height To Top Of Cab 14.06 ft in (4285 mm)
Length Of Track On Ground 13.06 ft in (3980 mm)
Ground Clearance 2.01 ft in (610 mm)
Track Gauge 8.21 ft in (2500 mm)
Length 412.8 in (10485 mm)

Undercarriage

Number Of Shoes (Each Side) 41
Number Of Shoes Per Side 41
Number Of Track Rollers Per Side 8
Shoe Size 24.02 in (610 mm)
Suspension Oscillating equaliser bar and pivot shaft
Track Rollerframe Cylinder, high-tensile-strength steel construction
Ground Contact Area 7527 in2 (4.86 m2)
Ground Pressure 15.6 psi (107.56 kPa)
Grouser Height 3.55 in (90 mm)
Number Of Carrier Rollers Per Side 2

Steering System

Minimum Turning Radius 13.8 ft in (4.2 m)

Engine Details

Horsepower, Gross-Sae J1995 635.7 hp (474 kw)
Horsepower, Net-Iso 9249 610.2 hp (455 kw)
Horsepower, Net-Sae J1349 610.2 hp (455 kw)
Fan Drive Method Hydraulic
Lubrication Method Gear pump, force lubrication
Filter Full flow
Number Of Cylinders 6
Engine Make Komatsu
Engine Model SAA6D170E-5
Governor All-speed and mid-range, electronic
Power Measured @ 1800 rpm
Displacement 1412.7 cu in (23.2 L)
Aspiration Turbochanged
Bore 6.7 in (170 mm)
Stroke 6.7 in (170 mm)

Driveline

Maximum Speeds Fwd 7.4 mph (11.8 km/h)
Maximum Speeds Rev 9.9 mph (15.8 km/h)
Transmission Torqflow
Number Of Speeds – Forward 3
Number Of Speeds – Reverse 3

Capacities

Transmission, Bevel Gear, And Steering System 39.7 gal (150 L)
Fuel Tank Capacity 317.1 gal (1200 L)
Final Drive 17.2 gal (65 L)
Engine Oil 22.8 gal (86 L)
Coolant 31.8 gal (120 L)

Operational Specs

Blade Capacity 24.2 yd3 (18.5 m3)
Blade Type Semi-U
Blade Length 184.9 in (4695 mm)
Blade Height 89.2 in (2265 mm)
Blade Cut Depth 29 in (735 mm)
Ripper Type Adjust
Ripper Depth 44.9 in (1140 mm)

Transmission

Transmission Type Torqflow

Weights

Operating Weight 157939.2 lb (71640 kg)
Ripper Weight 14991.5 lb (6800 kg)
Blade Weight 24074.5 lb (10920 kg)

Hydraulic System

Hydraulic System Type Closed-center Load Sensing System (CLSS)
Ask a question