Hitachi ZX130-6 Excavator


Boom/Stick Option (Hex) 1

Max Cutting Height 28.3 ft in (8625.84 mm)
Max Reach Along Ground 26.11 ft in (7958.33 mm)
Max Vertical Wall Digging Depth 16.61 ft in (5059.68 mm)
Max Digging Depth 18.3 ft in (5577.84 mm)
Arm Digging Force – Iso 15476 lb (68.85 kN)
Arm Digging Force – Sae 14991 lb (66.69 kN)
Bucket Digging Force – Iso 23435 lb (104.25 kN)
Bucket Digging Force – Sae 20525 lb (91.3 kN)
Max.Dumping Height 20.4 ft in (6217.92 mm)

Dimensions

Ground Clearance 1.35 ft in (410 mm)
Tail Swing Radius 7.2 ft in (2194.56 mm)
Track Gauge 6.6 ft in (2011.68 mm)
Counterweight Clearance 2.76 ft in (840 mm)
Overall Length 25.4 ft in (7741.92 mm)
Overall Width 10.6 in (269 mm)
Overall Height 9 ft in (2743.2 mm)
Center To Center – Idler To Sprocket 9.5 ft in (2895.6 mm)
Cab Height 10.99 in (279 mm)
Undercarriage Overall Length 11.9 ft in (3627.12 mm)

Undercarriage

Drawbar Pull 24729 lb (110.01 kN)
Track Adjustment Hydraulic
Number Of Track Rollers Per Side 7
Number Of Carrier Rollers Per Side 1

Engine Details

Emission Standards EPA Final Tier 4
Battery 2
Number Of Cylinders 4
Off-Level Capacity 70 %
Engine Model 4JJ1
Net Power 101 hp (75.4 kw)
Power Measured @ 2000 rpm
Aspiration Turbocharged and charged air cooled
Displacement 183.1 cu in (3 L)
Alternator 50 amps

Operational Specs

Propel Gearbox (Each) 1.1 gal (4 L)
Swing Gearbox 0.9 gal (3.2 L)
Fuel Tank Capacity 75.3 gal (285 L)
Cooling System Fluid Capacity 5.6 gal (21 L)
Engine Oil Capacity 4.5 gal (17 L)
Hydraulic System Relief Valve Pressure 26.9 psi (185 kPa)
Hydraulic Pump Flow Capacity 18.3 gal/min (69 L/min)

Performance

Travel Speed Low 2.1 mph (3.3 km/h)
Travel Speed – High 3.5 mph (5.5 km/h)

Swing Mechanism

Swing Speed 13.3 rpm
Swing Torque 25077.2 lb ft (34000 Nm)

Blade

Transport Height 9.5 ft in (2895.6 mm)
Blade Lift Height 20.6 in (523 mm)
Blade Cut Below Grade 19.3 in (488 mm)
Blade Lift Angle 27 degrees

Hydraulic System

Pilot Pump – Maximum Flow 27.8 gal/min (105 L/min)
Max. Pressure Setting 570 psi (3930.1 kPa)
Implement – Operating Pressure 4980 psi (34335.9 kPa)
Travel – Operating Pressure 4980 psi (34335.9 kPa)
Swing – Operating Pressure 4685 psi (32302 kPa)
Power Boost – Operating Pressure 5265 psi (36300.9 kPa)
Controls Pilot levers, short-stroke, low-effort hydraulic pilot controls with shutoff lever

Blade

Blade Length 8.3 ft in (2.6 m)
Blade Width 8.5 ft in (2590 mm)
Blade Height 20.6 in (523 mm)
Ask a question