John Deere 953K Feller Buncher

Dimensions

Tail Swing Radius 10.6 ft in (3230 mm)
Overall Machine Length* 251.5 in (6388.1 mm)
Overall Machine Width Without Bucket: Narrow Tracks – 380 Mm (14.9 In) Shoes 87.2 in (2214.88 mm)
Overall Machine Width Without Bucket: Standard Tracks – 480 Mm (19.7 In) Shoes 91.2 in (2316.48 mm)
Ramp Angle 29 degrees
Reach At Full Lift Height And 45 Degrees Dump* 47 in (1193.8 mm)
Maximum Rollback/Dump – Fully Raised 52 degrees/53 degrees
Overall Machine Height – Bucket Fully Raised 183.7 in (4665.98 mm)
Bucket Height – Carry Position 21.6 in (548.64 mm)
Carry Position Approach Angle 15 degrees
Clearance At Full Lift Height And 45 Degrees Dump* 106 in (2692.4 mm)
Digging Depth* 5.5 in (139.7 mm)
Grading Angle 74 degrees
Note *With general purpose bucket and extra duty teeth.
Height – Bucket Hinge Pin 142.1 in (3609.34 mm)
Height – Top Of Stack 110.3 in (2801.62 mm)
Machine Height – Top Of Cab 124.2 in (3154.68 mm)
Maximum Rollback – Ground/Carry Position 43 degrees/50 degrees

Undercarriage

Track Gauge 6.03 ft in (1836.42 mm)
Track Shoe Width – Standard 18.9 in (480.06 mm)
Ground Contact Area – Optional Shoe 2790 in2 (1.8 m2)
Ground Contact Area – Standard Shoe 3410 in2 (2.2 m2)
Ground Pressure – Optional Shoe 10.9 psi
Ground Pressure – Standard Shoe 8.6 psi
Ground Pressure(1) – Optional Shoe 11.1 psi
Ground Pressure(1) – Standard Shoe 8.8 psi
Grouser Height – Double Grouser 1.4 in (35.56 mm)
Track On Ground 91.3 in (2319.02 mm)
Track Rollers/Shoes – Each Side Jun-37
Track Shoe Width – Optional 14.9 in (378.46 mm)
Note (1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology.

Engine Details

Number Of Cylinders 6
Engine Make John Deere
Engine Model PowerTech Plus 6090H
Gross Power 330 hp (246.1 kw)
Net Power 286 hp (213.3 kw)
Net Torque 1026.7 lb ft (1392 Nm)
Displacement 549 cu in (9 L)
Emissions U.S. EPA Tier 4 Final/EU Stage IV/Korea Tier 4 Final or China Nonroad Stage III, India Bharat III, Eurasian Economic Union Stage IIIA, UN ECE R96 Stage IIIA emission standards, equivalent to Tier 3/Stage IIIA
Engine Model Cat C7.1 ACERT
Flywheel Power 154 hp (114.9 kw)
Note (1) All nonroad Tier 4 Interim and Final, Stage IIIB and IV and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) with 15 ppm (mg/kg) of sulfur or less, or up to B20 biodiesel blended with ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations.
Note (2) Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Net Power – Rated – Iso 9249 (Din) 156 hp (116.4 kw)
Net Power (Rated) – Sae J1349/Iso 9249 154 hp (114.9 kw)

Operational Specs

Operating Weight 33852 lb (15355.1 kg)
Fuel Tank Capacity 295 gal (1116.7 L)
Hydraulic System Fluid Capacity 82 gal (310.5 L)
Swing Speed 6 rpm
Operating Voltage 24 V
Max Speed 1.2 mph (2 km/h)

Weights

Note (1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology.
Operating Weight(1) 34484 lb (15641.7 kg)

Buckets

Capacity – General Purpose 2.4 yd3 (1.9 m3)
Capacity – Multi-Purpose 2.1 yd3 (1.7 m3)
Capacity – Performance Series 2.5 yd3 (2 m3)
Width – General Purpose 97.8 in (2484.2 mm)
Width – Performance Series 99.8 in (2535 mm)
Width – Multi-Purpose 97.3 in (2471.5 mm)
Note Buckets equipped with teeth and segments.

Service Refill Capacities

Fuel Tank Capacity 70 gal (265 L)
Note (1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology.
Def Tank(1) 4.2 gal (15.9 L)

Air Conditioning System

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.1 kg of refrigerant which has a CO2 equivalent of 1.573 metric tonnes.

General

Note For complete machine specifications and available configurations, please see your Cat dealer or look on this website.
Ask a question