Home » Forklifts » EP Forklifts » EP CPDS18JC1 Forklift

EP CPDS18JC1 Forklift

Contents
  1. Dimensions
  2. Mast
  3. Engine Details
  4. Operational Specs

Dimensions

Length To Fork Face 6.24 ft in (1900 mm)
Overall Width 3.48 ft in (1060 mm)
Overall Height – Mast Lowered 6.55 ft in (1995 mm)
Wheelbase 4.46 ft in (1358 mm)
Ground Clearance 3.55 in (90 mm)
Height To Top Of Overhead Guard 6.44 ft in (1960 mm)
Max Fork Height 12.95 ft in (3945 mm)
Right Angle Stack 11.06 ft in (3370 mm)
Turning Radius 5.09 ft in (1550 mm)

Mast

Mast Tip Forward 6.5 degrees
Mast Tip Rear 6.5 degrees
Load Capacity 3968.33 lb (1800 kg)
Max Fork Spread 39.38 in (1000 mm)
Load Center 19.69 in (500 mm)
Lift Speed 53.15 ft/min (16.2 m/min)

Engine Details

Engine Make 2366
Power 12.4 hp (9.2 kw)
Fuel Type electric motor

Operational Specs

Operating Weight 6790.3 lb (3080 kg)
Tire Type front 18×7-8 rear 15×4.5-8
Number Of Front Wheels 2
Number Of Rear Wheels 1
Max Speed 8.7 mph (14 km/h)
Ask a question

You may also like
John Deere Armrest Interface Control AIC Error Codes
John Deere 0
John Deere AIC Error Codes / Armrest Interface Control Unit Fault DTCs AIC 000158.03 – 524224.09
The John Deere Armrest Interface Control Error Codes, commonly referred to as John Deere
Case IH Tractor Error / Fault Codes (List of DTCs)
CNH Industrial 1
Case IH Tractor Error / Fault Codes (List of DTCs)
Understanding and diagnosing error or fault codes in Case IH tractors is crucial for
New Holland and Case IH Tractor Error Codes
CNH Industrial 0
FAQ for New Holland & Case IH Tractor Fault Codes / DTCs
Modern agriculture relies on cutting-edge technology, and Case IH & New Holland tractors are
Dozer Size Chart to Choose the Right Bulldozer for Your Job
Guides 1
Dozer Size Chart to Choose the Right Bulldozer for Your Job
Please note that the specifications and categorizations may vary among different manufacturers and models.
New Holland and Case IH Automatic Temperature Control Errors
CNH Industrial 0
New Holland & Case IH Tractor ATC Error List
Certainly, here’s a guide to understanding ATC (Automatic Temperature Control) error codes for New
John Deere Tractor PIN Locations
Serial Numbers 10
John Deere PIN Plate Decoder – Where is the Serial Number & How to Identify?
The Product Identification Number (PIN) / Serial Number plate on John Deere equipment contains