CAT M325B MH Material Handler


Dimensions

Ground Clearance 1.2 ft in (365.76 mm)
Shipping Length 34.5 ft in (10515.6 mm)
Shipping Height – Cab Tipped 12.3 ft in (3.75 m)
Operating Width – Outside Of Tires 10.6 ft in (3.24 m)
Wheel Base 10.5 ft in (3.21 m)
Width – Outriggers Down 17.3 ft in (5.28 m)
Width – Outriggers Up 11.5 ft in (3.51 m)

Engine Details

Displacement 403 cu in (6.7 L)
Engine Model 3116 TA
Sae J1349 168 hp (125.3 kw)
Iso 9249 168 hp (125.3 kw)

Performance

Gradeability 43 degrees
Maximum Drawbar Pull 32700 lb (14832.5 kg)
High Range Maximum Travel Speed 12.3 mph (19.8 km/h)
Low Range Maximum Travel Speed 3.2 mph (5.2 km/h)

Swing Mechanism

Swing Speed 10 rpm
Swing Torque 56080 lb ft (76034.3 Nm)

Weights

Upper 20880 lb (9471.1 kg)
Counterweight 16980 lb (7702 kg)
Two-Piece Front – With Cylinders 12500 lb (5670 kg)
Undercarriage 31675 lb (14367.6 kg)

Hydraulic System

Travel Circuit 4250 psi
Normal 4980 psi
Swing Mechanism 2500 psi
High Pressure 595 psi
Medium Pressure 8 psi
Implement/Travel Circuit 2500 gal/min
Heavy Lift 4980 psi

Operating Specifications

Maximum Reach 50.9 ft
Hyd. Cab Riser Height 6.4 ft in (2 m)
Maximum Reach – Below Ground 21.2 ft in (6.5 m)
Generator Set 26.8 hp (20 kw)
Maximum Stick Height 55.6 ft in (17 m)

Service Refill Capacities

Cooling System 8.3 gal (31.5 L)
Final Drive – Each 2.1 gal (8 L)
Hydraulic Tank 46 gal (174.2 L)
Hydraulic System – Including Tank 82 gal (310.5 L)
Swing Drive 2.6 gal (9.9 L)
Engine Crankcase – With Filter 5.3 gal (20.1 L)
Ask a question