CAT MH3024 Material Handler

Working Ranges

Maximum Reach – Stick Pin 40.9 ft in (12.5 m)
Maximum Height – Stick Pin 43.6 ft in (13.3 m)

Swing Mechanism

Swing Speed 9 rpm
Swing Torque 35430 lb ft (48036.7 Nm)

Push Blade

Blade Type Radial
Blade Height 3 ft in (1 m)
Width 9.8 ft in (3 m)

Undercarriage

Oscillation Axle Angle 5.0 degrees
Maximum Steering Angle 35.0 degrees
Minimum Turning Radius – Outside Of Tire 22.3 ft in (6.8 m)
Minimum Turning Radius – End Of Va Boom 23.3 ft in (7.2 m)
Minimum Turning Radius – End Of One-Piece Boom 27.9 ft in (8.6 m)
Axle Clearance 12.8 in (325.2 mm)
Dimensions valid for standard undercarriage

Engine Details

Engine Model Cat C7.1 ACERT Cat C4.4
Number Of Cylinders 6 4
Displacement 427.8 cu in (7.1 L) 268.5 cu in (4.4 L)
Bore 4.1 in (105 mm) 4.1 in (105 mm)
Stroke 5.3 in (135 mm) 5.3 in (135 mm)
Gross Power 174 hp (129 kw) 176 hp (129 kw)
Net Power 169 hp (126 kw) 174 hp (128 kw)
Power Measured @ 2200 rpm 2200 rpm
Maximum Torque 612 lb ft (830 Nm) 609 lb ft (826 Nm)
Torque Measured @ 1400 rpm 1400 rpm
Aspiration Turbocharged and aftercooled Turbocharged and aftercooled
Emission Standards U.S. EPA Tier 4 Final / Stage IV U.S. EPA & CARB Tier 4 Final, EU Stage V

Transmission

Type Two speed hydrostatic powershift transmission
Forward/Reverse – 1st Gear 5 mph (8.1 km/h)
Forward/Reverse – 2nd Gear 15.5 mph (25 km/h)
Creeper Speed – 1st Gear 1.9 mph (3.1 km/h)
Creeper Speed – 2nd Gear 7.5 mph (12.1 km/h)
Maximum Gradeability (25 000 Kg/55,115 Lb) 60%
Tire Size Options (1) 11.00-20 (dual pneumatic)
Tire Size Options (2) 10.00-20 (dual solid rubber)
Drawbar Pull 28550 lb (12950 kg)
Maximum Travel Speed 15.5 mph (25 km/h)

Weights

Max Operating Weight 59100 lb (26800 kg)
Min Operating Weight 50050 lb (22700 kg)
Standard Counterweight 9039 lb (4100 kg)
Optional Counterweight 11464 lb (5200 kg)
MH Push Blade 1488 lb (675 kg)
Dozer Blade 1874 lb (850 kg)
Typical Configurations
Cat MH3024 VA Boom 51600 lb (23400 kg)
Cat MH3024 Waste Handling 55350 lb (25100 kg)
Cat MH3024 Scrap Handling 55550 lb (25200 kg)

Hydraulic System

Auxiliary Circuit, High Pressure 66 gal/min
Auxiliary Circuit, Medium Pressure 12.9 gal/min
Implement / Travel Circuit 95 gal/min
Swing Mechanism 33.5 gal/min
Auxiliary Circuit, High Pressure 5076 psi
Auxiliary Circuit, Medium Pressure 3046 psi
Swing Mechanism Pressure 4496 psi
Implement Circuit – Normal 5076 psi
Implement Circuit – Heavy Lift 5366 psi
Implement Circuit – Travel Circuit 5076 psi

Service Refill Capacities

Engine Model Cat C7.1 ACERT Cat C4.4
Fuel Tank Capacity 111 gal (420 L) 92.5 gal (320 L)
Cooling System Capacity 12.4 gal (47 L) 9.5 gal (36 L)
Engine Oil Capacity 4.9 gal (18.6 L) 3.4 gal (13 L)
DEF Tank Capacity 9.1 gal (34.5 L) 7.9 gal (30 L)
Final Drive (each) 0.7 gal (2.7 L) 0.7 gal (2.5 L)
Powershift Transmission 0.7 gal (2.7 L) 0.7 gal (2.5 L)
Front Steering Axle – Differential 2.8 gal (10.6 L) 2.8 gal (10.5 L)
Rear Axle – Housing (Differential) 3.7 gal (14.1 L) 3.7 gal (14 L)
Hydraulic System Capacity 93 gal (352 L) 91.1 gal (345 L)
Hydraulic Tank Capacity 52.8 gal (200 L) 40.9 gal (155 L)

Operator Environment

Cab/Sound Levels Meets appropriate standards as listed in “Sound Performance”
Operator Protective Structure – Top/Front Guards FOPS (Falling Object Protective Structure) meets FOPS criteria ISO 10262:1998 and SAE J1356:2008
Operator Sound – 2000/14/Ec 71 dB(A)
Spectator Sound – 2000/14/Ec 100 dB(A)
Vibration Levels – Maximum Hand/Arm – Iso 5349:2001 <2.5 m/s2 (<8.2 ft/s2)
Vibration Levels – Maximum Whole Body – Iso/Tr 25398:2006 <0.5 m/s2 (<1.6 ft/s2)
Seat Transmissibility Factor – Iso 7096:2000 – Spectral Class Em5 <0.7
Ask a question