JCB 65R-1 Mini Excavator


Boom/Stick Option (Hex) 1

Max Reach Along Ground 21.71 ft in (6617 mm)
Minimum Front Swing Radius (No Offset) 9.24 ft in (2815 mm)
Maximum Digging Depth – Dozer Up 12.98 ft in (3954 mm)
Maximum Height To Dipper Nose Pivot Pin 16.69 ft in (5085 mm)
Maximum Vertical Wallcut Depth 9.25 ft in (2818 mm)
Minimum Front Swing Radius (Fully Offset) 7.94 ft in (2418 mm)
Max Digging Reach 22.07 ft in (6724 mm)
Max.Dumping Height 19.78 ft in (6026 mm)
Maximum Digging Depth – Dozer Down 13.16 ft in (4011 mm)

Dimensions

Ground Clearance 0.79 ft in (240 mm)
Height To Top Of Cab 8.48 ft in (2582 mm)
Tail Swing Radius 3.89 ft in (1185 mm)
Track Gauge 5.25 ft in (1600 mm)
Width Over Tracks 6.57 ft in (2000 mm)
Overall Width Of Superstructure 5.9 ft in (1798 mm)
Transport Height- Minimum 1837.28 ft in (560 m)
Transport Length, Minimum 18733.6 ft in (5710 m)
Cab Height 61.19 in (1554 mm)

Undercarriage

Tractive Effort 120.16 lb (54.5 kg)
Number Of Track Rollers Per Side 4
Max Travel Speed 2.68 mph (4.3 km/h)
Track Tension Grease

Engine Details

Fuel Diesel
Starter Motor 2 KW
Engine Model 404D-22
Gross Power 47.9 hp (35.7 kw)
Cooling System Water cooled
Net Power 44.4 hp (33.1 kw)
Power Measured @ 2600 rpm
Displacement 132970.8 cu in (2179 L)
Torque Measured @ 1800 rpm
Alternator 85 amps

Operational Specs

Operating Weight 14903.3 lb (6760 kg)
Fuel Tank Capacity 22 gal (83 L)
Hydraulic System Fluid Capacity 24.5 gal (92.5 L)
Engine Oil Capacity 2.5 gal (9.1 L)
Operational Voltage 12 V
Hydraulic Pump Flow Capacity 15.2 gal/min (57.2 L/min)

Performance

Travel Speed Low 1.7 mph (2.6 km/h)
Travel Speed – High 3 mph (4.7 km/h)
Gradeability 35 %

Swing Mechanism

Swing Speed 9.6 rpm

Blade

Approach Angle 26 degrees

Hydraulic System

Excavator/Track Main Relief 250 bar
Slew Main Relief 216 bar
Nominal Output 38.4 gal/min (145 L/min)

Blade

Maximum Height 1.6 ft in (473 mm)
Dig Depth (Below Ground) 1.9 ft in (562 mm)
Reach In Front Of Tracks 2.6 ft in (787 mm)

Hydraulic System

Hydraulic Motor (Travel) Piston
Auxiliary Hydraulic Flow 50.2 gal/min (190 L/min)

Blade

Blade Width 2018 mm

Hydraulic System

Pump Type 63 cc

Blade

Height 16.5 in (417 mm)

Boom

Boom Swing Left 60 degrees
Boom Swing Right 60 degrees
Dipper Rotation 118 degrees
Bucket Tearout 10701 lb (47.6 kN)
Dipper Tearout 6879.2 lb (30.6 kN)
Slew Speed 9.2 rpm
Ask a question