JCB 67C-1 Mini Excavator


Boom/Stick Option (Hex) 1

Max Reach Along Ground 21.34 ft in (6504 mm)
Minimum Front Swing Radius (No Offset) 8.66 ft in (2637 mm)
Maximum Digging Depth – Dozer Up 13.31 ft in (4054 mm)
Maximum Height To Dipper Nose Pivot Pin 16.91 ft in (5153 mm)
Maximum Vertical Wallcut Depth 9.73 ft in (2963 mm)
Minimum Front Swing Radius (Fully Offset) 7.83 ft in (2384 mm)
Max Digging Reach 21.71 ft in (6617 mm)
Max.Dumping Height 14.05 ft in (4281 mm)
Maximum Digging Depth – Dozer Down 13.36 ft in (4070 mm)

Dimensions

Ground Clearance 0.79 ft in (240 mm)
Height To Top Of Cab 8.48 ft in (2582 mm)
Tail Swing Radius 4.55 ft in (1385 mm)
Track Gauge 5.25 ft in (1600 mm)
Width Over Tracks 6.57 ft in (2000 mm)
Overall Width Of Superstructure 5.9 ft in (1798 mm)
Transport Height- Minimum 8530.19 ft in (2600 m)
Transport Length, Minimum 18372.71 ft in (5600 m)
Cab Height 61.19 in (1554 mm)

Undercarriage

Tractive Effort 120.16 lb (54.5 kg)
Number Of Track Rollers Per Side 4
Max Travel Speed 2.68 mph (4.3 km/h)
Track Tension Grease

Engine Details

Fuel Diesel
Starter Motor 2 KW
Engine Model KDI 1903
Gross Power 55 hp (41 kw)
Cooling System Water cooled
Net Power 51.5 hp (38.4 kw)
Power Measured @ 2200 rpm
Displacement 116128.3 cu in (1903 L)
Torque Measured @ 1500 rpm

Operational Specs

Operating Weight 14552.8 lb (6601 kg)
Fuel Tank Capacity 22 gal (83 L)
Cooling System Fluid Capacity 2.7 gal (10 L)
Hydraulic System Fluid Capacity 24.5 gal (92.5 L)
Engine Oil Capacity 2 gal (7.5 L)
Operational Voltage 12 V
Hydraulic Pump Flow Capacity 15.2 gal/min (57.2 L/min)

Performance

Travel Speed Low 1.7 mph (2.6 km/h)
Travel Speed – High 2.9 mph (4.6 km/h)
Gradeability 30 %

Swing Mechanism

Swing Speed 9.6 rpm

Blade

Approach Angle 26 degrees

Hydraulic System

Excavator/Track Main Relief 250 bar
Slew Main Relief 216 bar
Nominal Output 38.1 gal/min (144 L/min)

Blade

Maximum Height 1.6 ft in (473 mm)
Dig Depth (Below Ground) 1.9 ft in (562 mm)
Reach In Front Of Tracks 2.6 ft in (787 mm)

Hydraulic System

Hydraulic Motor (Travel) Piston
Auxiliary Hydraulic Flow 50.2 gal/min (190 L/min)

Blade

Blade Width 2018 mm

Hydraulic System

Pump Type 72 cc

Blade

Height 16.5 in (417 mm)

Boom

Boom Swing Left 60 degrees
Boom Swing Right 60 degrees
Dipper Rotation 118 degrees
Bucket Tearout 10701 lb (47.6 kN)
Dipper Tearout 6879.2 lb (30.6 kN)
Slew Speed 9 rpm
Ask a question