Contents
Boom/Stick Option (Hex) 1
Max Reach Along Ground | 15.29 ft in (4660 mm) |
Minimum Front Swing Radius (No Offset) | 6.71 ft in (2045 mm) |
Minimum Front Swing Radius (Fully Offset) | 6.14 ft in (1870 mm) |
Max Digging Reach | 15.65 ft in (4770 mm) |
Max.Dumping Height | 10.57 ft in (3220 mm) |
Maximum Digging Depth – Dozer Down | 10.01 ft in (3050 mm) |
Maximum Digging Depth – Dozer Up | 8.99 ft in (2740 mm) |
Maximum Vertical Wallcut Depth | 6.83 ft in (2080 mm) |
Maximum Height To Dipper Nose Pivot Pin | 12.57 ft in (3830 mm) |
Dimensions
Ground Clearance | 1.15 ft in (350 mm) |
Height To Top Of Cab | 7.88 ft in (2400 mm) |
Tail Swing Radius | 4.01 ft in (1220 mm) |
Track Gauge | 4.11 ft in (1252 mm) |
Width Over Tracks | 4.93 ft in (1502 mm) |
Overall Width Of Superstructure | 5.09 ft in (1550 mm) |
Removal Counterweight Clearance | 2.5 ft in (762 mm) |
Transport Height- Minimum | 7874.02 ft in (2400 m) |
Transport Length, Minimum | 13385.83 ft in (4080 m) |
Cab Height | 61.19 in (1554 mm) |
Undercarriage
Number Of Track Rollers Per Side | 3 |
Track Tension | Grease |
Tractive Effort | 55.12 lb (25 kg) |
Engine Details
Fuel | Diesel |
Starter Motor | 2 KW |
Engine Model | 403D-I5 |
Gross Power | 24.7 hp (18.4 kw) |
Cooling System | Water cooled |
Net Power | 22.2 hp (16.5 kw) |
Power Measured @ | 2100 rpm |
Displacement | 91291.6 cu in (1496 L) |
Torque Measured @ | 1800 rpm |
Alternator | 65 amps |
Operational Specs
Operating Weight | 6320.7 lb (2867 kg) |
Fuel Tank Capacity | 14.8 gal (56 L) |
Cooling System Fluid Capacity | 2.3 gal (8.5 L) |
Hydraulic System Fluid Capacity | 18.8 gal (71 L) |
Engine Oil Capacity | 1.2 gal (4.5 L) |
Operational Voltage | 12 V |
Hydraulic Pump Flow Capacity | 17.5 gal/min (66 L/min) |
Performance
Travel Speed Low | 1.6 mph (2.5 km/h) |
Travel Speed – High | 3.1 mph (4.9 km/h) |
Gradeability | 36 % |
Blade
Approach Angle | 31 degrees |
Hydraulic System
Nominal Output | 25.4 gal/min (96 L/min) |
Blade
Maximum Height | 1.1 ft in (333 mm) |
Hydraulic System
Slew Main Relief | 190 lpm |
Excavator/Track Main Relief | 235 bar |
Blade
Dig Depth (Below Ground) | 1.4 ft in (405 mm) |
Reach In Front Of Tracks | 1.2 ft in (342 mm) |
Hydraulic System
Auxiliary Hydraulic Flow | 15.6 gal/min (59 L/min) |
Blade
Blade Width | 1550 mm |
Hydraulic System
Pump Type | 2 Variable & 1 Gear |
Blade
Height | 10.6 in (268 mm) |
Boom
Boom Swing Left | 45 degrees |
Boom Swing Right | 60 degrees |
Bucket Rotation | 189 degrees |
Dipper Rotation | 119 degrees |
Bucket Tearout | 5170.7 lb (23 kN) |
Dipper Tearout | 3821.8 lb (17 kN) |
Slew Speed | 9.6 rpm |