Contents
- Dimensions
- Dump
- Engine Details
- Operational Specs
- Transmission
- Steering
- Weights
- Tires
- Brakes
- Body Hoists
- Final Drives
- Operating Specifications
- Service Refill Capacities
- Weight Distributions – Approximate
- Capacity – Dual Slope – 100% Fill Factor
- Capacity – Flat Floor – 100% Fill Factor
- Rops
- Sound
- Suspension
- Approximate Weights – Dual Slope
- Approximate Weights – Flat Floor
Dimensions
Overall Length | 33.92 ft in (10338.82 mm) |
Overall Width | 17.68 ft in (5392 mm) |
Overall Height | 14.5 ft in (4430 mm) |
Wheelbase | 13.83 ft in (4215 mm) |
Ground Clearance | 2.5 ft in (762 mm) |
Dump Height | 30.42 ft in (9261 mm) |
Dump Ground Clearance | 2.08 ft in (625 mm) |
Inside Body Depth – Maximum | 6.5 ft in (1.99 m) |
Inside Body Length | 20.08 ft in (6.13 m) |
Inside Body Width | 13.08 ft in (3.99 m) |
Loading Height – Empty | 12.92 ft in (3.94 m) |
Centerline Front Tire Width | 10.5 ft in (3.21 m) |
Centerline Of Rear Dual Tire Width | 9 ft in (2.75 m) |
Dump Clearance | 2 ft in (0.61 m) |
Engine Guard Clearance | 2.33 ft in (0.72 m) |
Front Canopy Height | 14.5 ft in (4.42 m) |
Height – Top Of Rops | 13.5 ft in (4.12 m) |
Overall Canopy Width | 16.33 ft in (4.98 m) |
Overall Height – Body Raised | 30.42 ft in (9.28 m) |
Overall Tire Width | 14.5 ft in (4.42 m) |
Rear Axle – Clearance | 2.17 ft in (0.67 m) |
Rear Axle – Tail | 9.25 ft in (2.82 m) |
Wheel Base | 13.75 ft in (4.2 m) |
Operating Width | 17.18 ft in (5233.42 mm) |
Outside Body Width | 14 ft in (4.27 m) |
Overall Body Length | 30.25 ft in (9.23 m) |
Dump
Dump Angle | 60 degrees |
Lower Time | 12.5 sec |
Raise Time | 9.5 sec |
Load Capacity – Struck | 41.8 yd3 (32 m3) |
Load Capacity – Heaped | 54.8 yd3 (41.9 m3) |
Rated Payload | 140000 lb (63502.94 kg) |
Engine Details
Number Of Cylinders | 12 |
Engine Make | CAT |
Engine Model | C27 ACERT |
Gross Power | 787 hp (587 kw) |
Net Power | 740 hp (552 kw) |
Power Measured @ | 2000 rpm |
Max Torque | 2582 lb ft (3500.8 Nm) |
Displacement | 1649 cu in (27.1 L) |
Aspiration | Turbocharged |
Peak Torque | 2582 lb ft (3500.8 Nm) |
Bore | 5.4 in (137.2 mm) |
Stroke | 6 in (152.4 mm) |
Net Power – Cat | 740 hp (551.9 kw) |
Net Power – Iso 9249 | 740 hp (551.9 kw) |
Net Power – Sae J1349 | 740 hp (551.9 kw) |
Net Power – 80/1269/Eec | 740 hp (551.9 kw) |
Gross Power – Sae J1995 | 787 hp (586.9 kw) |
Engine Model | Cat C27 ACERT |
Flywheel Power | 740 hp (551.9 kw) |
Rated Engine Speed | 2000 rpm |
Operational Specs
Fuel Tank Capacity | 185 gal (700 L) |
Cooling System Fluid Capacity | 46 gal (175 L) |
Engine Oil Capacity | 19 gal (72 L) |
Diff And Final Drive Fluid Capacity | 41 gal (155 L) |
Steering System Fluid Capacity | 16 gal (60 L) |
Brake/Hoist System Fluid Capacity | 81 gal (307 L) |
Hydraulic System Fluid Capacity | 19 gal (72 L) |
Tire Size | 24.00R35(E4) |
Transmission
Transmission Type | Gear |
Number Of Gears – Forward | 7 |
Number Of Gears – Reverse | 1 |
Max Speed | 41.9 mph (67.5 km/h) |
Reverse | 8.8 mile/h |
Forward – 1 | 6.7 mph (10.8 km/h) |
Forward – 2 | 9.3 mph (15 km/h) |
Forward – 3 | 12.6 mph (20.3 km/h) |
Forward – 4 | 17 mph (27.4 km/h) |
Forward – 5 | 23 mph (37.1 km/h) |
Forward – 6 | 31 mph (49.9 km/h) |
Forward – 7 | 41.9 mph (67.5 km/h) |
Steering
Steering Standards | SAE J1511 OCT90, ISO 5010: 1992 |
Steer Angle | 31 degrees |
Turning Diameter – Front | 77.1 ft in (23.5 m) |
Turning Circle – Clearance Diameter | 85.7 ft in (26.2 m) |
Weights
Empty Weight | 105830.6 lb (48004 kg) |
Loaded Weight | 242001.2 lb (109770 kg) |
Weight Distribution Front – Empty | 49 % |
Weight Distribution Rear – Empty | 51 % |
Weight Distribution Front – Loaded | 33 % |
Weight Distribution Rear – Loaded | 67 % |
Tires
Standard Tire | 24.00R35 (E4) |
Brakes
Brake Surface – Front | 216 in2 (0.2 m2) |
Brake Surface – Rear | 9497 in2 (6.2 m2) |
Brake Standards | ISO 3450: 1996 |
Body Hoists
Pump Flow – High Idle | 148 gal/min |
Relief Valve Setting – Raise | 2750 psi |
Body Raise Time – High Idle | 9.5 s |
Body Lower Time – Float | 12.5 s |
Relief Valve Setting – Lower | 500 psi |
Final Drives
Planetary Ratio | 4.80:1 |
Differential Ratio | 3.64:1 |
Total Reduction Ratio | 17.49:1 |
Operating Specifications
Nominal Payload Class (100%) | 140000 lb (63502.9 kg) |
Top Speed – Loaded | 41.9 mph (67.5 km/h) |
Maximum Capacity | 140000 lb (63502.9 kg) |
Raise Time | 9.5 s |
Lower Time | 12.5 s |
Steer Angle | 31 degrees |
Body Capacity – Sae 2:1 | 54.8 yd3 (41.9 m3) |
Maximum Working Payload (110%) | 154000 lb (69853.2 kg) |
Not To Exceed Payload (120%)* | 168000 lb (76203.5 kg) |
Turning Diameter – Front | 77.1 ft in (23.6 m) |
Service Refill Capacities
Cooling System | 46 gal (174.2 L) |
Differential – Final Drives | 41 gal (155.3 L) |
Steering Tank | 9 gal (34.1 L) |
Steering System – Including Tank | 16 gal (60.6 L) |
Fuel Tank Capacity | 185 gal (700.4 L) |
Torque Converter – Transmission System – Including Sump | 19 gal (72 L) |
Brake Hoist System – Includes Tank | 81 gal (306.7 L) |
Crankcase | 25 gal (94.7 L) |
Torque Converter – Transmission System | 14 gal (53 L) |
Brake / Hoist / Fan Hydraulic Tank | 35 gal (132.5 L) |
Weight Distributions – Approximate
Front Axle – Empty | 49 % |
Front Axle – Loaded | 33 % |
Rear Axle – Empty | 51 % |
Rear Axle – Loaded | 67 % |
Capacity – Dual Slope – 100% Fill Factor
Struck | 43.3 yd3 (33.2 m3) |
Heaped 2:1 (Sae) | 55.6 yd3 (42.6 m3) |
Capacity – Flat Floor – 100% Fill Factor
Struck | 41.8 yd3 (32 m3) |
Heaped 2:1 (Sae) | 54.8 yd3 (41.9 m3) |
Rops
Rops/Fops Standards | .ISO 3471:1994 ISO 3449:1992 Level II |
Sound
Sound Standards | ANSI/SAE J1166 MAY90. |
Suspension
Rear Axle – Oscillation | 8 degrees |
Effective Cylinder Stroke – Front | 9.3 in (235 mm) |
Effective Cylinder Stroke – Rear | 5.9 in (149.9 mm) |
Approximate Weights – Dual Slope
Body | 29877 lb (13552 kg) |
Approximate Weights – Flat Floor
Body | 29665 lb (13455.9 kg) |