Contents
- Dimensions
- Dump
- Engine Details
- Operational Specs
- Transmission
- Steering
- Weights
- Tires
- Brakes
- Body Hoists
- Final Drives
- Operating Specifications
- Service Refill Capacities
- Weight Distributions – Approximate
- Weights – Approximate
- Capacity – Dual Slope – 100% Fill Factor
- Rops
- Sound
- Suspension
- Approximate Weights – Dual Slope
- Approximate Weights – Dual Slope Lined
Dimensions
Overall Length | 32.1 ft in (9781.04 mm) |
Overall Width | 20.02 ft in (6100 mm) |
Overall Height | 16.41 ft in (5000 mm) |
Wheelbase | 15 ft in (4570 mm) |
Ground Clearance | 2.46 ft in (749.81 mm) |
Dump Height | 32.71 ft in (9970 mm) |
Dump Ground Clearance | 2.87 ft in (872 mm) |
Inside Body Depth – Maximum | 6.3 ft in (1.93 m) |
Inside Body Length | 23.73 ft in (7.24 m) |
Inside Body Width | 17.06 ft in (5.2 m) |
Operating Width | 20.03 ft in (6105.15 mm) |
Outside Body Width | 18.12 ft in (5.53 m) |
Overall Body Length | 31.3 ft in (9.55 m) |
Overall Canopy Width | 19.11 ft in (5.83 m) |
Overall Height – Body Raised | 33 ft in (10.06 m) |
Loading Height – Empty | 14.37 ft in (4.38 m) |
Centerline Front Tire Width | 13.69 ft in (4.18 m) |
Centerline Of Rear Dual Tire Width | 11.75 ft in (3.59 m) |
Dump Clearance | 3.1 ft in (0.95 m) |
Engine Guard Clearance | 2.33 ft in (0.72 m) |
Front Canopy Height | 16.61 ft in (5.06 m) |
Height – Top Of Rops | 14.8 ft in (4.52 m) |
Overall Tire Width | 17.27 ft in (5.27 m) |
Rear Axle – Clearance | 2.5 ft in (0.77 m) |
Rear Axle – Tail | 9.11 ft in (2.78 m) |
Wheel Base | 14.99 ft in (4.57 m) |
Dump
Rated Payload | 200000 lb (90718.48 kg) |
Load Capacity – Heaped | 79.14 yd3 (60.5 m3) |
Load Capacity – Struck | 54.94 yd3 (42 m3) |
Raise Time | 15 sec |
Engine Details
Number Of Cylinders | 8 |
Engine Make | CAT |
Engine Model | 3508A |
Gross Power | 1000 hp (745.7 kw) |
Net Power | 938 hp (699.5 kw) |
Max Torque | 3476.2 lb ft (4713 Nm) |
Displacement | 2105 cu in (34.5 L) |
Torque Measured @ | 1300 rpm |
Torque Rise | 23 % |
Bore | 6.7 in (170.2 mm) |
Stroke | 7.5 in (190.5 mm) |
Net Power – Cat | 938 hp (699.5 kw) |
Net Power – Iso 9249 | 938 hp (699.5 kw) |
Net Power – Sae J1349 | 938 hp (699.5 kw) |
Net Power – 80/1269/Eec | 938 hp (699.5 kw) |
Gross Power – Sae J1995 | 1000 hp (745.7 kw) |
Engine Model | Cat 3508B EUI |
Flywheel Power | 938 hp (699.5 kw) |
Rated Engine Speed | 1750 rpm |
Operational Specs
Fuel Tank Capacity | 300.4 gal (1137 L) |
Cooling System Fluid Capacity | 85.9 gal (325 L) |
Engine Oil Capacity | 32.8 gal (124 L) |
Diff And Final Drive Fluid Capacity | 87 gal (329 L) |
Steering System Fluid Capacity | 22.2 gal (84 L) |
Brake/Hoist System Fluid Capacity | 109.7 gal (415 L) |
Hydraulic System Fluid Capacity | 36.5 gal (138 L) |
Transmission
Transmission Type | automatic power shift |
Number Of Gears – Forward | 7 |
Number Of Gears – Reverse | 1 |
Max Speed | 37.6 mph (60.4 km/h) |
Reverse | 7.4 mile/h |
Forward – 1 | 6.5 mph (10.5 km/h) |
Forward – 2 | 8.9 mph (14.4 km/h) |
Forward – 3 | 12 mph (19.4 km/h) |
Forward – 4 | 16.2 mph (26.1 km/h) |
Forward – 5 | 21.9 mph (35.3 km/h) |
Forward – 6 | 29.4 mph (47.4 km/h) |
Forward – 7 | 39.9 mph (64.3 km/h) |
Steering
Steering Standards | SAE J1511 OCT90, ISO 5010:1992 (E) |
Steer Angle | 31.8 degrees |
Weights
Empty Weight | 155000 lb (70306.9 kg) |
Loaded Weight | 355010.5 lb (161030 kg) |
Weight Distribution Front – Empty | 45.4 % |
Weight Distribution Rear – Empty | 54.6 % |
Weight Distribution Front – Loaded | 33.3 % |
Weight Distribution Rear – Loaded | 66.7 % |
Tires
Standard Tire | 27.00-R49 (E4) |
Brakes
Brake Surface – Front | 432 in2 (0.3 m2) |
Brake Surface – Rear | 15828 in2 (10.3 m2) |
Brake Standards | ISO 3450: 1996; SAE J1473 OCT90 |
Body Hoists
Pump Flow – High Idle | 119 gal/min |
Relief Valve Setting – Raise | 2750 psi |
Body Raise Time – High Idle | 15 s |
Body Lower Time – Float | 13 s |
Body Power Down – High Idle | 13 s |
Relief Valve Setting – Lower | 3450 psi |
Final Drives
Planetary Ratio | 7.00:1 |
Differential Ratio | 2.74:1 |
Total Reduction Ratio | 19.16:1 |
Operating Specifications
Circle Clearance Diameter | 85.5 ft in (26.1 m) |
Nominal Payload Class (100%) | 178920 lb (81156.7 kg) |
Top Speed – Loaded | 39.9 mph (64.3 km/h) |
Body Capacity – Struck | 55.1 yd3 (42.1 m3) |
Maximum Capacity | 178920 lb (81156.7 kg) |
Raise Time | 15 s |
Lower Time | 14 s |
Steer Angle | 31.8 degrees |
Body Capacity – Sae 2:1 | 78.6 yd3 (60.1 m3) |
Service Refill Capacities
Cooling System | 86 gal (325.6 L) |
Differential – Final Drives | 87 gal (329.4 L) |
Steering Tank | 15 gal (56.8 L) |
Steering System – Including Tank | 22 gal (83.3 L) |
Fuel Tank Capacity | 300 gal (1135.7 L) |
Torque Converter – Transmission System – Including Sump | 36.5 gal (138.1 L) |
Torque Converter – Brake – Hoist Hydraulic Tank | 66 gal (249.9 L) |
Brake Hoist System – Includes Tank | 109.7 gal (415 L) |
Torque Converter – Brake – Hoist System – Including Tank | 133 gal (503.5 L) |
Weight Distributions – Approximate
Front Axle – Empty | 47 % |
Front Axle – Loaded | 33 % |
Rear Axle – Empty | 53 % |
Rear Axle – Loaded | 67 % |
Weights – Approximate
Operating Weight – Empty | 141749 lb (64296.3 kg) |
Operating Weight – Loaded | 355000 lb (161025.4 kg) |
Target Gross Machine Operating Weight | 360000 lb (163293.3 kg) |
Chassis Weight | 107100 lb (48579.8 kg) |
Body Weight | 34800 lb (15785.1 kg) |
Capacity – Dual Slope – 100% Fill Factor
Struck | 55 yd3 (42.1 m3) |
Heaped 2:1 (Sae) | 78.6 yd3 (60.1 m3) |
Rops
Rops/Fops Standards | SAE J1040 MAY94, ISO 3471:1997 |
Sound
Sound Standards | ANSI/SAE J1166 MAY90, SAE J88 JUN96 |
Suspension
Rear Axle – Oscillation | 5.4 degrees |
Effective Cylinder Stroke – Front | 12.5 in (317.5 mm) |
Effective Cylinder Stroke – Rear | 6.5 in (165.1 mm) |
Approximate Weights – Dual Slope
Body | 34785 lb (15778.3 kg) |
Chassis | 106964 lb (48518.1 kg) |
Approximate Weights – Dual Slope Lined
Body | 46840 lb (21246.3 kg) |