Contents
- Dimensions
- Dump
- Engine Details
- Operational Specs
- Transmission
- Steering
- Weights
- Tires
- Brakes
- Body Hoists
- Final Drives
- Operating Specifications
- Service Refill Capacities
- Weight Distributions – Approximate
- Weights – Approximate
- Capacity – Dual Slope – 100% Fill Factor
- Capacity – Flat Floor – 100% Fill Factor
- Rops
- Sound
- Suspension
- Approximate Weights – Dual Slope
- Approximate Weights – Flat Floor
Dimensions
| Overall Length | 36.25 ft in (11024 mm) |
| Overall Width | 20.6 ft in (6277 mm) |
| Overall Height | 19 ft in (5769 mm) |
| Wheelbase | 17 ft in (5182 mm) |
| Ground Clearance | 3.24 ft in (987 mm) |
| Dump Height | 36.83 ft in (11207 mm) |
| Dump Ground Clearance | 4.21 ft in (1284 mm) |
Dump
| Dump Angle | 49 degrees |
| Load Capacity – Struck | 96 yd3 (74 m3) |
| Load Capacity – Heaped | 119 yd3 (91 m3) |
| Rated Payload | 300000 lb (136077.72 kg) |
| Lower Time | 15.9 sec |
| Raise Time | 15.2 sec |
Engine Details
| Number Of Cylinders | 16 |
| Engine Make | CAT |
| Engine Model | 3512B-EUI |
| Gross Power | 1451 hp (1082 kw) |
| Net Power | 1348 hp (1005.3 kw) |
| Power Measured @ | 1750 rpm |
| Aspiration | Turbocharged |
| Displacement | 3158 cu in (51.8 L) |
| Torque Rise | 23 % |
| Bore | 6.7 in (170.2 mm) |
| Stroke | 7.5 in (190.5 mm) |
| Net Power – Cat | 1348 hp (1005.3 kw) |
| Net Power – Iso 9249 | 1348 hp (1005.3 kw) |
| Net Power – Sae J1349 | 1348 hp (1005.3 kw) |
| Net Power – 80/1269/Eec | 1348 hp (1005.3 kw) |
| Gross Power – Sae J1995 | 1450 hp (1081.3 kw) |
| Engine Model | Cat 3512B-EUI |
Operational Specs
| Fuel Tank Capacity | 500 gal (1893 L) |
| Cooling System Fluid Capacity | 100 gal (379 L) |
| Engine Oil Capacity | 24 gal (90 L) |
| Diff And Final Drive Fluid Capacity | 115 gal (436 L) |
| Steering System Fluid Capacity | 31 gal (117 L) |
| Brake/Hoist System Fluid Capacity | 89 gal (337 L) |
| Hydraulic System Fluid Capacity | 169.4 gal (641 L) |
| Operating Voltage | 24 V |
| Alternator Supplied Amperage | 75 amps |
| Tire Size | 33.00-R51 tires |
Transmission
| Transmission Type | Six-speed planetary |
| Number Of Gears – Forward | 6 |
| Number Of Gears – Reverse | 1 |
| Max Speed | 34 mph (54.8 km/h) |
| Reverse | 6.8 mile/h |
| Forward – 1 | 7.5 mph (12.1 km/h) |
| Forward – 2 | 10.2 mph (16.5 km/h) |
| Forward – 3 | 13.8 mph (22.3 km/h) |
| Forward – 4 | 18.6 mph (30 km/h) |
| Forward – 5 | 25.2 mph (40.6 km/h) |
| Forward – 6 | 34 mph (54.8 km/h) |
Steering
| Steering Standards | SAE J1511 OCT90 ISO 5010:1992 |
Weights
| Empty Weight | 225200 lb (102150 kg) |
| Loaded Weight | 550000 lb (249480 kg) |
| Weight Distribution Front – Empty | 47 % |
| Weight Distribution Rear – Empty | 53 % |
| Weight Distribution Front – Loaded | 33 % |
| Weight Distribution Rear – Loaded | 67 % |
Tires
| Standard Tires | 33.00-R51 (E4) 33.00-R51 (E3) |
Brakes
| Brake Surface – Front | 9497 in2 (6.2 m2) |
| Brake Surface – Rear | 13908 in2 (9 m2) |
| Standards | SAE J1473 OCT90 ISO 3450-1985 |
Body Hoists
| Pump Flow – High Idle | 198 gal/min |
| Relief Valve Setting – Raise | 2500 psi |
| Body Raise Time – High Idle | 15.2 s |
| Body Lower Time – Float | 16.2 s |
| Body Power Down – High Idle | 15.9 s |
| Body Lower Time – High Idle | 15.9 s |
Final Drives
| Planetary Ratio | 10.83:1 |
| Differential Ratio | 2.10:1 |
| Total Reduction Ratio | 22.75:1 |
Operating Specifications
| Top Speed – Loaded | 34 mph (54.8 km/h) |
| Raise Time | 15.2 s |
| Lower Time | 15.9 s |
| Steer Angle | 36 degrees |
| Turning Diameter – Front | 90.2 ft in (27.5 m) |
| Nominal Payload Capacity | 300000 lb (136077.6 kg) |
| Machine Clearance Turning Diameter | 100.4 ft in (30.7 m) |
| Sae (2:1) Capacity | 102 yd3 (78 m3) |
Service Refill Capacities
| Cooling System | 100 gal (378.6 L) |
| Differential – Final Drives | 115 gal (435.4 L) |
| Steering Tank | 24 gal (90.9 L) |
| Steering System – Including Tank | 31 gal (117.4 L) |
| Brake Hoist System – Includes Tank | 169 gal (639.8 L) |
| Crankcase | 54 gal (204.5 L) |
| Brake/Hoist Hydraulic Tank | 89 gal (337 L) |
| Torque Converter/Transmission System – Including Sump | 65.6 gal (248 L) |
| Fuel Tank – Standard | 500 gal (1892.8 L) |
Weight Distributions – Approximate
| Front Axle – Empty | 47 % |
| Front Axle – Loaded | 33 % |
| Rear Axle – Empty | 53 % |
| Rear Axle – Loaded | 67 % |
Weights – Approximate
| Chassis Weight | 164134 lb (74450 kg) |
| Gross Machine Operating Weight | 550000 lb (249475.9 kg) |
| Operating Weight – Empty – Flat Floor Body | 225200 lb (102149.1 kg) |
| Operating Weight – Empty – Dual-Slope Body | 211035 lb (95723.9 kg) |
Capacity – Dual Slope – 100% Fill Factor
| Struck | 74 yd3 (56.6 m3) |
| Heaped (Sae 2:1) | 102 yd3 (78 m3) |
Capacity – Flat Floor – 100% Fill Factor
| Struck | 96 yd3 (73.4 m3) |
| Heaped (Sae 2:1) | 119 yd3 (91 m3) |
Rops
| Rops Standards | SAE J1040 APR88 ISO 3471:1994 |
Sound
| Sound Standards | ANSI/SAE J1166 MAY90 SAE J88 APR95 |
Suspension
| Effective Cylinder Stroke – Front | 12.1 in (307.4 mm) |
| Effective Cylinder Stroke – Rear | 6.5 in (165.1 mm) |
Approximate Weights – Dual Slope
| Body | 46865 lb (21257.7 kg) |
| Chassis | 164134 lb (74450 kg) |
| Front Axle – Empty | 47 % |
| Front Axle – Loaded | 33 % |
| Rear Axle – Empty | 53 % |
| Rear Axle – Loaded | 67 % |
| Gross Weight – Empty | 211035 lb (95723.9 kg) |
Approximate Weights – Flat Floor
| Body | 56630 lb (25687 kg) |
| Chassis | 164134 lb (74450 kg) |
| Front Axle – Empty | 47 % |
| Front Axle – Loaded | 33 % |
| Rear Axle – Empty | 53 % |
| Rear Axle – Loaded | 67 % |
| Gross Weight – Empty | 225200 lb (102149.1 kg) |
| Standard Liner | 4400 lb (1995.9 kg) |
