Contents
Engine Details
| Net Power | 2478 hp (1847.9 kw) |
| Displacement | 5187 cu in (85 L) |
| Torque Rise | 20 % |
| Bore | 6.9 in (175.3 mm) |
| Stroke | 8.7 in (221 mm) |
| Emissions | EPA Compliant. Where applicable, the Cat C175-16 engine is compliant with U.S. Environmental Protection Agency emission requirements. |
| Net Power – Sae J1349 | 2478 hp (1847.9 kw) |
| Gross Power – Sae J1995 | 2650 hp (1976.2 kw) |
| Engine Model | Cat C175-16 |
| Note (1) | Power ratings apply at 1,750 rpm when tested under the specified condition for the specified standard. |
| Note (2) | Ratings based on SAE J1995 standard air conditions of 25 degrees C (77 degrees F) and 99 kPa (29.61 Hg) dry barometer. Power based on fuel having API gravity of 35 at 16 degrees C (60 degrees F) and an LHV of 42.780 kJ/kg (18,390 Btu/lb) when engine used at 30 degrees C (86 degrees F). |
| Note (3) | No engine derating required up to 3810 m (12,500 ft) altitude. |
Transmission
| Reverse | 7.3 mile/h |
| Forward – 1 | 8 mph (12.9 km/h) |
| Forward – 2 | 10.8 mph (17.4 km/h) |
| Forward – 3 | 14.8 mph (23.9 km/h) |
| Forward – 4 | 19.9 mph (32.1 km/h) |
| Forward – 5 | 27.1 mph (43.7 km/h) |
| Forward – 6 | 37.3 mph (60.1 km/h) |
Steering
| Steering Standards | SAE J15111 OCT90, ISO 5010:1992 |
Brakes
| Brake Surface – Front | 13921 in2 (9 m2) |
| Brake Surface – Rear | 20847 in2 (13.5 m2) |
| Standards | J-ISO 3450 JAN88, ISO 3450:1996 |
| Outside Diameter | 34.5 in (876.3 mm) |
Body Hoists
| Pump Flow – High Idle | 224 gal/min |
| Relief Valve Setting – Raise | 2955 psi |
| Body Raise Time – High Idle | 19 s |
| Body Lower Time – Float | 20 s |
| Body Power Down – High Idle | 17.5 s |
| Note (1) | Twin, two-stage hydraulic cylinders mounted outside main frame, double-acting cylinders in second stage. |
| Note (2) | Power raise in both stages, power down in second stage. |
| Note (3) | Automatic body lower modulation reduces impact on frame. |
Final Drives
| Planetary Ratio | 16:01 |
| Differential Ratio | 1.8:1 |
| Total Reduction Ratio | 28.8:1 |
Operating Specifications
| Top Speed – Loaded | 37.3 mph (60.1 km/h) |
| Steer Angle | 36 degrees |
| Turning Diameter – Front | 93 ft in (28.4 m) |
| Nominal Payload Capacity | 500000 lb (226796 kg) |
| Turning Circle – Clearance Diameter | 107 ft in (32.7 m) |
| Gross Machine Operating Weight | 386 007 or 390 089 kg (851,000 or 860,000 lb) |
| Note | Refer to the Cat Mining Truck 10/10/20 Overload Policy for maximum gross machine weight limitations. |
Service Refill Capacities
| Cooling System | 284 gal (1075.1 L) |
| Steering System – Including Tank | 77 gal (291.5 L) |
| Fuel Tank Capacity | 750 gal (2839.1 L) |
| Brake Hoist System – Includes Tank | 347 gal (1313.6 L) |
| Crankcase | 82 gal (310.5 L) |
| Torque Converter/Transmission System – Including Sump | 55 gal (208.2 L) |
| Fuel Tank – Optional | 1300 gal (4921.1 L) |
| Rear Axle – Housing | 260 gal (984.3 L) |
| Torque Converter – Transmission Sump | 27 gal (102.3 L) |
Weight Distributions – Approximate
| Front Axle – Empty | 48 % |
| Front Axle – Loaded | 33 % |
| Rear Axle – Empty | 52 % |
| Rear Axle – Loaded | 67 % |
Weights – Approximate
| Chassis Weight | 270000 lb (122470 kg) |
| Note (1) | Chassis weight with 100 percent fuel, hoist, body mounting group, rims and 40.00R57 tires. |
| Note (2) | Body weight varies depending on how body is equipped. |
| Body Weight Range | 26 862-47 627 kg (59,220-105,000 lb) |
Rops
| Rops Standards | ROPS (Rollover Protective Structure) for cab offered by CAT meets ISO 3471:1994 ROPS criteria. |
| Fops Standards | FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II FOPS criteria. |
Sound
| Sound Standards (1) | Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment. |
| Sound Standards | The operator sound pressure level measured according to work cycle procedures specified in ISO 6394 and 6396 is 76 dB(A) for cab offered by Caterpillar, when properly installed and maintained and tested with doors and windows closed. |
Suspension
| Effective Cylinder Stroke – Front | 5.1 in (129.6 mm) |
| Effective Cylinder Stroke – Rear | 4.2 in (106.7 mm) |
Capacity – Msd Ii – 100% Fill Factor
| Note | Contact your local Cat dealer for body recommendation. |
| Heaped (Sae 2:1) | 159-190 m3 (209-250 yd3) |
| Struck | 112-142 m3 (146-186 yd3) |
