Contents
Dimensions (Approximate)
| Overall Length | 43.83 ft in (13.36 m) |
| Ground Clearance | 3.42 ft in (1.05 m) |
| Centerline Of Rear Dual Tire Width | 16.28 ft in (4.97 m) |
| Dump Clearance | 4.27 ft in (1.31 m) |
| Engine Guard Clearance | 4.35 ft in (1.33 m) |
| Front Canopy Height | 23.21 ft in (7.08 m) |
| Height – Top Of Rops | 18.75 ft in (5.72 m) |
| Inside Body Width | 24.06 ft in (7.34 m) |
| Loading Height – Empty | 20.28 ft in (6.19 m) |
| Outside Body Width | 26.06 ft in (7.95 m) |
| Overall Canopy Width | 28.09 ft in (8.57 m) |
| Overall Height – Body Raised | 45 ft in (13.72 m) |
| Overall Tire Width | 24.95 ft in (7.61 m) |
| Rear Axle – Clearance | 3.71 ft in (1.14 m) |
| Rear Axle – Tail | 13.11 ft in (4 m) |
| Note | Shown with 162 m3 (212 yd3) HP Body. |
| Wheel Base | 19.37 ft in (5.91 m) |
| Centerline Front Tire Width | 18.4 ft in (5.61 m) |
Engine Details
| Displacement | 5187 cu in (85 L) |
| Torque Rise | 20 % |
| Bore | 6.9 in (175.3 mm) |
| Stroke | 8.7 in (221 mm) |
| Emissions | Meets Tier 4 Final emission standards. |
| Gross Power – Sae J1995 | 2650 hp (1976.2 kw) |
| Engine Model | Cat C175-16 |
| Note (1) | Power ratings apply at 1,750 rpm when tested under the specified condition for the specified standard. |
| Note (2) | Ratings based on SAE J1995 standard air conditions of 25 degrees C (77 degrees F) and 99 kPa (29.61 Hg) dry barometer. Power based on fuel having API gravity of 35 at 16 degrees C (60 degrees F) and an LHV of 42.780 kJ/kg (18,390 Btu/lb) when engine used at 30 degrees C (86 degrees F). |
| Note (3) | No engine derating required up to 3200 m (10,500 ft) altitude. |
Transmission
| Reverse | 7.3 mile/h |
| Forward – 1 | 8 mph (12.9 km/h) |
| Forward – 2 | 10.8 mph (17.4 km/h) |
| Forward – 3 | 14.8 mph (23.9 km/h) |
| Forward – 4 | 19.9 mph (32.1 km/h) |
| Forward – 5 | 27.1 mph (43.7 km/h) |
| Forward – 6 | 37.3 mph (60.1 km/h) |
Steering
| Steering Standards | ISO 5010:2007 |
Brakes
| Brake Surface – Front | 13921 in2 (9 m2) |
| Brake Surface – Rear | 20847 in2 (13.5 m2) |
| Standards | ISO 3450:1996 |
| Outside Diameter | 34.5 in (876.3 mm) |
Body Hoists
| Pump Flow – High Idle | 224 gal/min |
| Relief Valve Setting – Raise | 2955 psi |
| Body Raise Time – High Idle | 19 s |
| Body Lower Time – Float | 20 s |
| Body Power Down – High Idle | 17.5 s |
| Note (1) | Twin, two-stage hydraulic cylinders mounted outside main frame, double-acting cylinders in second stage. |
| Note (2) | Power raise in both stages, power down in second stage. |
| Note (3) | Automatic body lower modulation reduces impact on frame. |
Final Drives
| Planetary Ratio | 16:1 |
| Differential Ratio | 1.8:1 |
| Total Reduction Ratio | 28.8:1 |
Operating Specifications
| Top Speed – Loaded | 37.3 mph (60.1 km/h) |
| Steer Angle | 36 degrees |
| Turning Diameter – Front | 93 ft in (28.4 m) |
| Nominal Payload Capacity | 500000 lb (226796 kg) |
| Turning Circle – Clearance Diameter | 107 ft in (32.7 m) |
| Gross Machine Operating Weight | 386 007 or 390 089 kg (851,000 or 860,000 lb) |
| Note | Refer to the Cat Mining Truck 10/10/20 Overload Policy for maximum gross machine weight limitations. |
Service Refill Capacities
| Cooling System | 284 gal (1075.1 L) |
| Steering System – Including Tank | 77 gal (291.5 L) |
| Fuel Tank Capacity | 750 gal (2839.1 L) |
| Brake Hoist System – Includes Tank | 347 gal (1313.6 L) |
| Crankcase | 82 gal (310.5 L) |
| Torque Converter/Transmission System – Including Sump | 55 gal (208.2 L) |
| Rear Axle – Housing | 260 gal (984.3 L) |
| Torque Converter – Transmission Sump | 27 gal (102.3 L) |
| Diesel Exhaust Fluid Tank | 62 gal (234.7 L) |
Weight Distributions – Approximate
| Front Axle – Empty | 49% |
| Front Axle – Loaded | 33% |
| Rear Axle – Empty | 51% |
| Rear Axle – Loaded | 67% |
Weights – Approximate
| Chassis Weight | 274587 lb (124550.6 kg) |
| Note (1) | Chassis weight with 100 percent fuel, hoist, body mounting group, rims and 40.00R57 tires. |
| Note (2) | Body weight varies depending on how body is equipped. |
| Body Weight Range | 26 862-47 627 kg (59,220-105,000 lb) |
Rops
| Rops Standards | ROPS (Rollover Protective Structure) cab offered by CAT meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer. |
| Fops Standards | FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 for Operator and ISO 13459:2012 Level II FOPS for Trainer. |
Sound
| Sound Standards (1) | The operator sound pressure level measured according to work cycle procedures specified in ISO 6394 and 6396 is 74 dB(A) for cab offered by Caterpillar, when properly installed and maintained and tested with doors and windows closed. |
| Sound Standards (2) | Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment. |
Suspension
| Effective Cylinder Stroke – Front | 5.1 in (129.6 mm) |
| Effective Cylinder Stroke – Rear | 4.2 in (106.7 mm) |
Capacity – Hp – 100% Fill Factor
| Struck | 112.6-151 m3 (147-197.5 yd3) |
| Heaped (Sae 2:1)* | 162-191 m3 (212-250 yd3) |
| Note (1) | Contact your local Cat dealer for body recommendation. |
| Note (2) | *ISO 6483:1980 |
