Contents
Engine Details
| Net Power | 3188 hp (2377.3 kw) |
| Displacement | 5187 cu in (85 L) |
| Bore | 6.9 in (175.3 mm) |
| Stroke | 8.7 in (221 mm) |
| Gross Power – Sae J1995 | 3400 hp (2535.4 kw) |
| Engine Model | Cat C175-16 |
Steering
| Steering Standards | SAE J1511 OCT90 ISO 5010:1992 |
Tires
| Standard Tires | Choices |
Body Hoists
| Pump Flow – High Idle | 247 gal/min |
| Relief Valve Setting – Raise | 3553 psi |
| Body Raise Time – High Idle | 19 s |
| Body Lower Time – Float | 20 s |
| Body Power Down – High Idle | 17.5 s |
Final Drives
| Total Reduction Ratio | 35:1 |
Operating Specifications
| Top Speed – Loaded | 40 mph (64.4 km/h) |
| Steer Angle | 34 degrees |
| Turning Diameter – Front | 112 ft in (34.2 m) |
| Nominal Payload Capacity | 690000 lb (312978.5 kg) |
| Gross Machine Operating Weight (Gmw) | 1257000 lb (570165.7 kg) |
| Turning Circle – Clearance Diameter | 127 ft in (38.8 m) |
Service Refill Capacities
| Cooling System | 291 gal (1101.6 L) |
| Steering Tank | 55.5 gal (210.1 L) |
| Steering System – Including Tank | 79 gal (299.1 L) |
| Fuel Tank Capacity | 950 gal (3596.2 L) |
| Brake Hoist System – Includes Tank | 396.3 gal (1500.2 L) |
| Crankcase | 82 gal (310.5 L) |
| Brake/Hoist Hydraulic Tank | 134.2 gal (508.1 L) |
| Final Drive – Each | 90 gal (340.7 L) |
| Fuel Tank – Optional | 1900 gal (7192.3 L) |
Weight Distributions – Approximate
| Front Axle – Empty | 48 % |
| Front Axle – Loaded | 33 % |
| Rear Axle – Empty | 52 % |
| Rear Axle – Loaded | 67 % |
Weights – Approximate
| Chassis Weight | 445524 lb (202086.4 kg) |
| Body Weight Range | 38 500-54 500 kg (84,900-120,000 lb) |
| Gross Machine Operating Weight (Gmw) | 1257000 lb (570165.7 kg) |
Rops
| Rops Standards | Standards |
Sound
| Sound Standards | Standards |
Suspension
| Effective Cylinder Stroke – Front | 11.5 in (292.1 mm) |
| Effective Cylinder Stroke – Rear | 5.6 in (142.3 mm) |
Ac Drive System
| Controls | IGBT Inverter Technology, air cooled, pressurized cabinet with filtration |
| Wheel Motor | Rear axle mounted Cat AC induction |
| Cooling System | Variable speed, hydraulic cooling system |
| Generator/Alternator | Brushless, remote mounted, dual bearing |
Braking System
| Blended Four Corner Retarding | Standard |
| Oil Cooled Brakes – Retarding Capable At All Speeds – Outside Diameter | 42 in (1066.8 mm) |
| Oil Cooled Brakes – Retarding Capable At All Speeds – Brake Surface – Front | 20500.1 in2 (13.3 m2) |
| Oil Cooled Brakes – Retarding Capable At All Speeds – Brake Surface – Rear | 30750.2 in2 (19.9 m2) |
| Oil Cooled Brakes – Retarding Capable At All Speeds – Standards | J-ISO 3450 JAN88, ISO 3450:1996 |
| Dynamic Retarding Power | 6370 hp (4750.2 kw) |
| Electric Retarding – Radial Grid Design With Brushless Ac Fan Motor | 4750 kW (6,370 hp) rated power |
Capacity – Msd Ii – 100% Fill Factor
| Heaped (Sae 2:1) | 181-252 m3 (237-330 yd3) |
| Struck | 121.5-211 m3 (159-276 yd3) |
