Contents
- Undercarriage
- Swing System
- Engine Details
- Bucket
- Operating Specifications
- Operator’S Cab
- General
- Operating Weights
- Automatic Lubrication System
- Hydraulic Oil Cooling
- Hydraulic System With Pump Managing System
- Attachments
- Diesel Engines
- Electric Motor – 6060 Ac/6060 Ac Fs
- Electrical System – Diesel Drive
- Retractable Service Station
Undercarriage
| Bottom Rollers – Each Side | 7 |
| Components (1) | All running surfaces of sprockets, idlers, rollers & pad links, as well as teeth contact areas of sprocket & pad links, are hardened |
| Components (2) | Acoustic travel alarm |
| Components (3) | Cast double-grouser combined pad links with bushings connected by hardened full floating pins |
| Components (4) | Bottom rollers are connected to the automatic lubrication system |
| Components (5) | Fully hydraulic, self-adjusting track tensioning system with membrane accumulator |
| Components (6) | Automatic hydraulic retarder valve to prevent over-speed on downhill travel |
| Gradeability – Travel Drives – Maximum | 52 % |
| Maximum Tractive Force | 664300 lb |
| Parking Brakes | Wet multiple-disc brake, spring applied/hydraulically released |
| Support Rollers – Each Side | 2 plus a skid plate in between |
| Track Pads – Each Side | 42 |
| Travel Drives – Each Side | 1 planetary transmission with 2 two-stage axial piston motors |
| Travel Speed – 1st Stage – Maximum | 0.87 mph (1.41 km/h) |
| Travel Speed – 2nd Stage – Maximum | 1.24 mph (2 km/h) |
Swing System
| Swing Drive | 4 compact planetary transmissions with axial piston motors |
| Swing Ring | Triple-race roller bearing with sealed internal gearing |
| Parking Brakes | Wet multiple disc brake, spring loaded/hydraulically released |
| Features (3) | Hydraulic braking of the swing motion by counteracting control |
| Features (2) | Closed-loop swing circuit with torque control |
| Features (1) | Dirt wipers at swing ring to prevent build-up of debris between swing ring and carbody |
| Maximum Swing Speed | 3.8 rpm |
| Features (4) | All raceways and the internal gearing of swing ring, supplied by automatic central lubrication system |
Engine Details
| Net Power – Sae J1349 | 3000 hp (2237.1 kw) |
| Gross Power – Sae J1995 | 3000 hp (2237.1 kw) |
| Engine Model | 2 Cat 3512C |
| Note | Electric drive option available (1800 kW) on 6060 AC/6060 AC FS |
Bucket
| Bucket Capacity – Face Shovel (Heaped 2:1) | 44.5 yd3 (34.1 m3) |
| Bucket Capacity – Backhoe (Heaped 1:1) | 44.5 yd3 (34.1 m3) |
Operating Specifications
| Bucket Payload | 134000 lb (60781.4 kg) |
| Operating Weight – Face Shovel | 1300000 lb (589669.6 kg) |
| Operating Weight – Backhoe | 1298000 lb (588762.5 kg) |
Operator’S Cab
| Components (10) | Robust instrument panel including large colored BCS screen with transflective technology |
| Components (1) | Pneumatically cushioned and multi-adjustable comfort seat with lumbar support, safety belt, head and armrests |
| Components (8) | Switch in seat cushion to automatically neutralize the hydraulic controls when operator leaves the seat |
| Components (7) | External sun shields at side and rear windows |
| Components (6) | Fold-away auxiliary seat with safety belt |
| Components (5) | FOPS (rock guard; approved according to DIN ISO 3449) integrated into cab structure |
| Components (4) | All-round safety glass, armored windshield and sliding side window |
| Components (3) | Windshield with parallel intermittent wiper/washer |
| Components (2) | Under roof mounted heating ventilating and air conditioning system |
| Components (9) | Joystick controls integrated in independently adjustable seat consoles |
| Operator’S Eye Level – Approximately | 25 ft in (7.6 m) |
| Internal Dimensions Of Cab – Length | 7.3 ft in (2.3 m) |
| Internal Dimensions Of Cab – Width | 5.3 ft in (1.7 m) |
| Internal Dimensions Of Cab – Height | 7.1 ft in (2.2 m) |
| Board Control System (Bcs) Features | Electronic monitoring & data logging system for vital signs & service data of engines, hydraulic system & lubrication system |
| Components (11) | Sliding emergency ladder (kick-down type) with ladder cage |
| Components (12) | Machine access via retractable access stairway, stairway angle approximately 45 degrees, hydraulically operated |
| Components (13) | Roller blinds at all windows |
General
| Engine Output – Sae J1995 | Cat 3512C – 2240 kW (3,000 hp) |
| Standard Bucket Capacity | Face Shovel (heaped 2:1) – 34.0 m3 (44.5 yd3); Backhoe (heaped 1:1) – 34.0 m3 (44.5 yd3) |
| Operating Weight | Face Shovel – 569 tonnes (627 tons); Backhoe – 570 tonnes (628 tons) |
Operating Weights
| Note | Other track pads available on request. |
| 6060 Fs – Standard Track Pads | 4.6 ft in (1.4 m) |
| 6060 Fs – Operating Weight | 1254200 lb (568895.6 kg) |
| 6060 Fs – Ground Pressure | 25.4 N/cm2 (36.8 psi) |
| 6060 – Standard Track Pads | 4.6 ft in (1.4 m) |
| 6060 – Operating Weight | 1257280 lb (570292.7 kg) |
| 6060 – Ground Pressure | 25.5 N/cm2 (37.0 psi) |
| 6060 Ac Fs – Standard Track Pads | 4.6 ft in (1.4 m) |
| 6060 Ac Fs – Operating Weight | 1204370 lb (546293.1 kg) |
| 6060 Ac Fs – Ground Pressure | 24.4 N/cm2 (35.4 psi) |
| 6060 Ac – Standard Track Pads | 4.6 ft in (1.4 m) |
| 6060 Ac – Operating Weight | 1207460 lb (547694.7 kg) |
| 6060 Ac – Ground Pressure | 24.5 N/cm2 (35.6 psi) |
Automatic Lubrication System
| Capacity – Grease Container | 264 gal (999.4 L) |
| Type (2) | System failures displayed by Board Control System |
| Type (4) | Connected to main lube system are: – pivot points of attachment, bucket and cylinders – bottom rollers of undercarriage |
| Type (3) | Grease filters (200 m) between service station and container as well as directly behind grease pump |
| Type (1) | Dual-circuit system with hydraulically driven heavy-duty pumps and electronic time relay control to adjust the pause/lube times |
| Type (5) | Connected to main lube system are: – raceways of swing roller bearing – 2 greasing pinions for the internal gearing of swing ring |
Hydraulic Oil Cooling
| Oil Flow Of Cooling Pumps | 4 488 L/min (4 129 gal/min) |
| Components | Gear-type cooling pumps supplying high-volume, low-pressure oil to fans and aluminum coolers |
| Features (3) | Extremely high cooling efficiency to ensure optimum oil temperature |
| Features (1) | Cooling system fully independent of all main circuits, i.e. controlled cooling capacity is available whenever engine is running |
| Features (2) | Fan speed and flow of oil to the coolers are thermostatically controlled |
Hydraulic System With Pump Managing System
| Main Pumps – Maximum Oil Flow – Diesel Version | 4 1300 L/min (4 343 gal/min) |
| Swing Pumps – Maximum Oil Flow – Diesel Version | 4 352 L/min (4 93 gal/min) |
| Swing Pumps – Diesel Version | 4 reversible swash plate pumps |
| Main Pumps – Diesel Version | 4 swash plate double pumps |
| Main Pumps – Maximum Oil Flow – Ac Version | 4 933 L/min (4 246 gal/min) |
| Maximum Pressure – Attachment | 4640 psi |
| Maximum Pressure – Travel | 5365 psi |
| Swing Pumps – Maximum Oil Flow – Ac Version | 3 491 L/min (3 131 gal/min) |
| Maximum Pressure – Swing Pumps | 5365 psi |
| Main Pumps – Ac Version | 4 variable flow axial piston pumps |
| Swing Pumps – Ac Version | 3 reversible swash plate pumps |
| Total Volume Of Hydraulic Oil – Diesel Version – Approximately | 1930 gal (7305.9 L) |
| Total Volume Of Hydraulic Oil – Ac Version – Approximately | 2483 gal (9399.2 L) |
| Hydraulic Tank Capacity – Diesel Version – Approximately | 1876 gal (7101.5 L) |
| Hydraulic Tank Capacity – Ac Version – Approximately | 1320 gal (4996.8 L) |
Attachments
| Type (7) | Booms and sticks are torsion-resistant, welded box design of high-tensile steel with massive steel castings at pivot areas |
| Type (5) | Welding procedures allow for internal counter-welding (double prep weld) wherever possible |
| Type (6) | Booms and sticks are stress-relieved after welding |
| Type (1) | Catwalks with rails at booms |
| Type (4) | Inspection holes in booms (FS and BH) and stick (FS) |
| Type (2) | Guards for shovel cylinders (FS) |
| Type (3) | Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve |
| Shovel Attachment With Unique Tripower Kinematics Ensuring The Following Main Features: (2) | – Horizontal automatic constant-angle bucket guidance – Vertical automatic constant-angle bucket guidance |
| Shovel Attachment With Unique Tripower Kinematics Ensuring The Following Main Features: (1) | – Automatic roll-back limiter to prevent material spillage – Kinematic assistance to hydraulic forces |
| Shovel Attachment With Unique Tripower Kinematics Ensuring The Following Main Features: (3) | – Constant boom momentum throughout the entire lift arc – Crowd force assistance |
| All Buckets (Fs And Bh) Are Equipped With A Wear Package Consisting Of: (1) | – Special liner material covering main wear areas inside and outside of bucket – Lip shrouds between teeth |
| All Buckets (Fs And Bh) Are Equipped With A Wear Package Consisting Of: (2) | – Wing shrouds on side walls – Heel shrouds at bottom edges |
| Type (8) | Special wear packages for highly abrasive materials on request |
Diesel Engines
| Make/Model | 2 Cat 3512C (Tier 2) |
| Bore | 6.7 in (170 mm) |
| Stroke | 8.5 in (214.9 mm) |
| Displacement | 3574 cu in (58.6 L) |
| Aspiration | Turbocharged and charge air-cooled |
| Fuel Tank Capacity | 3435 gal (13002.9 L) |
| Components (3) | Heavy-duty air filters |
| Components (4) | Microprocessed engine management |
| Components (5) | Hydraulically driven radiator fan with electronically controlled fan speed |
| Components (2) | Two-stage fuel filter including water separator |
| Components (1) | Additional high-capacity water separator |
| Total Rated Net Power – Iso 3046/1 | 2240 kW 1,800 min-1 (3,000 hp 1,800 min-1) |
| Number Of Cylinders – Each Engine | 12 |
| Maximum Altitude – Without Deration – At 20 Degrees C (68 Degrees F) Above Sea Level | 9800 ft in (2987.1 m) |
| Alternators | 2 150 A |
| Emissions | U.S. EPA flex |
| Total Rated Gross Power – Sae J1995 | 2240 kW 1,800 min-1 (3,000 hp 1,800 min-1) |
| Total Rated Net Power – Sae J1349 | 2240 kW 1,800 min-1 (3,000 hp 1,800 min-1) |
Electric Motor – 6060 Ac/6060 Ac Fs
| Electric Motor – 6060 Ac/6060 Ac Fs Type | Squirrel cage induction motor |
| Output | 2414 hp (1800.2 kw) |
| Voltage | 6.6 kV 10% (other on request) |
| Rated Current In | 194 A (at 6.6 kV) |
| Frequency | 50 Hz (60 Hz on request) |
| Revolutions | 1500 min-1 (1,800 min-1 at 60 Hz) |
| Starting Current | 350% of IN (197% of IN Optional) |
Electrical System – Diesel Drive
| System Voltage | 24V |
| Components (1) | 16 LED service lights |
| Components (2) | Battery isolation relays and switches |
| Batteries In Series/Parallel Installation | 6 210 Ah – 12V each; 630 Ah – 24V in total |
| Components (4) | 12 LED high-brightness working flood lights – 10 for working area – 2 for rear end |
| Components (5) | 2 LED high-brightness access flood lights |
| Components (3) | Emergency stop switches accessible from ground level and in engine module |
Retractable Service Station
| Installation | Retractable service station installed underneath the engine module and easily accessible from ground. |
