Case 865 VHP Motor Grader

Dimensions

Overall Length 28 ft in (8534 mm)
Width Over Tires 8.25 ft in (2510 mm)
Wheelbase 20.43 ft in (6219 mm)
Rear Ground Clearance 1.25 ft in (380 mm)
Tandem Axle Wheelbase 5.17 ft in (1594 mm)
Front Ground Clearance 2.04 ft in (622 mm)
Blade Base 8.42 ft in (2562 mm)
Height To Top Of Isomount Cab 10.92 ft in (3340 mm)

Engine Details

Fuel Diesel
Fuel Injection Common Rail
Number Of Cylinders 6
Engine Make Cummins
Engine Model QSB-6.7, Tier III certified Electronic control
Engine Type 4-stroke, turbocharged and air-to-air cooled
Power Measured @ 2200 rpm
Torque Measured @ 1500 rpm
Max Power 205 hp (152.9 kw)
Net Power Gears 7-8 205 hp (152.9 kw)
Net Torque Gears 7-8 650 lb ft (881 Nm)
Displacement 411 cu in (6.7 L)
Bore 4.1 in (104 mm)
Stroke 5.2 in (132 mm)
Aspiration turbocharged, air to air cooled

Operational Specs

Std Operation Weight – Front Axle 9464 lb (4293 kg)
Std Operation Weight – Rear Axle 22822 lb (10342 kg)
Hydraulic System Fluid Capacity 50.2 gal (190 L)
Std Operation Weight – Total 32265 lb (14635 kg)
Oil System Fluid Capacity 4.7 gal (17.8 L)
Fuel Tank Capacity 90 gal (340.7 L)
Cooling System Fluid Capacity 10.5 gal (40 L)
Transmission Fluid Capacity 5 gal (23 L)
Rear Diff/Final Drive Fluid Capacity 3.2 gal (12 L)
Circle Gearbox Fluid Capacity 0.8 gal (2.8 L)
Tandem Case Fluid Capacity (Each) 7.6 gal (28.7 L)
Tire Size 14.0 x 24 12PR TL G2 Firestone
Operating Voltage 24 V
Alternator Supplied Amperage 80 amps

Steering

Articulation Angle 25 degrees
Turning Radius 23.8 ft in (7.3 m)

Transmission

Transmission Type direct drive contershaft powershift
Number Of Gears – Forward 8
Number Of Gears – Reverse 4
Max Speed – Forward 26.6 mph (42.9 km/h)
Max Speed – Reverse 17.7 mph (28.5 km/h)

Front Axle

Wheel Lean 17.5 degrees
Oscillation – Total 19 degrees

Moldboard

Moldboard Length 13 ft in (3962 mm)
Moldboard Height 23.6 in (600 mm)
Moldboard Thickness 0.9 in (22.2 mm)
Max Depth Of Cut 28 in (711.2 mm)
Side Shift Left 21 in (533 mm)
Side Shift Right 27 in (686 mm)

Hydraulic System

Pump Type Closed center load sensing piston pump
Pump Flow 37.9 gal/min (143.5 L/min)
Relief Valve Pressure 6092 psi (- -)

Circle

Blade Pitch Operation Adjustment Fwd 42 degrees
Blade Pitch Operation Adjustment Rear 87 degrees
Diameter 69 in (1752 mm)
Rotation 360 degrees
Max Lift Above Ground 17.5 in (444.5 mm)
Ask a question