Contents
Dimensions
| Overall Length | 28 ft in (8534 mm) |
| Width Over Tires | 8.7 ft in (2650 mm) |
| Wheelbase | 20.41 ft in (6219 mm) |
| Rear Ground Clearance | 1.25 ft in (380 mm) |
| Tandem Axle Wheelbase | 5.33 ft in (1624 mm) |
| Front Ground Clearance | 2.05 ft in (622 mm) |
| Blade Base | 8.41 ft in (2562 mm) |
| Overall Height With Cab | 10.31 ft in (3140 mm) |
| Front Axle Clearance | 22.84 in (580 mm) |
| Height To Top Of Isomount Cab | 10.96 ft in (3340 mm) |
| Bank Angle | 90 |
Engine Details
| Fuel | Diese |
| Fuel Injection | Common Rail |
| Emission Standards | Tier 3 |
| Number Of Cylinders | 6 |
| Engine Make | Case |
| Engine Model | FPT 6.7L |
| Engine Type | 4-stroke, turbocharged and air-to-air after cooled |
| Net Power | 219 hp (163.4 kw) |
| Power Measured @ | 2200 rpm |
| Net Power Gears 7-8 | 214 hp (159.6 kw) |
| Net Torque Gears 7-8 | 726 lb ft (984.4 Nm) |
| Displacement | 408.9 cu in (6.7 L) |
| Bore | 4.1 in (104 mm) |
| Stroke | 5.2 in (132 mm) |
| Aspiration | Turbocharged with Aftercooler |
Operational Specs
| Std Operation Weight – Front Axle | 12496 lb (5668.1 kg) |
| Std Operation Weight – Rear Axle | 27970 lb (12687 kg) |
| Hydraulic System Fluid Capacity | 47.5 gal (179.9 L) |
| Std Operation Weight – Total | 40466 lb (18355.1 kg) |
| Oil System Fluid Capacity | 4.4 gal (16.7 L) |
| Fuel Tank Capacity | 90 gal (340.7 L) |
| Cooling System Fluid Capacity | 10.5 gal (39.8 L) |
| Transmission Fluid Capacity | 5.8 gal (22 L) |
| Rear Diff/Final Drive Fluid Capacity | 10.5 gal (39.8 L) |
| Circle Gearbox Fluid Capacity | 0.8 gal (2.8 L) |
| Tandem Case Fluid Capacity (Each) | 15.9 gal (60.2 L) |
| Tire Size | 20.5-25 |
| Operating Voltage | 24 V |
| Alternator Supplied Amperage | 90 amps |
Steering
| Articulation Angle | 25 degrees |
| Turning Radius | 24 ft in (7.3 m) |
Transmission
| Transmission Type | powershift |
| Number Of Gears – Forward | 8 |
| Number Of Gears – Reverse | 4 |
| Max Speed – Forward | 26.7 mph (43 km/h) |
| Max Speed – Reverse | 19 mph (30.6 km/h) |
| Speed Range | 6 |
Front Axle
| Wheel Lean | 20 degrees |
| Oscillation – Total | 15.3 degrees |
| Ground Clearance | 2.1 ft in (622 mm) |
Moldboard
| Moldboard Width | 14 ft in (4267.2 mm) |
| Moldboard Height | 23.7 in (600 mm) |
| Moldboard Thickness | 0.9 in (22.2 mm) |
| Max Depth Of Cut | 28 in (711.2 mm) |
| Side Shift Left | 21 in (533.4 mm) |
| Side Shift Right | 27 in (685.8 mm) |
| Blade Down Pressure | 21178 lb (9606.2 kg) |
Hydraulic System
| Pump Type | Closed center, load sensing |
| Pump Flow | 49 gal/min (185.5 L/min) |
Circle
| Blade Pitch Operation Adjustment Fwd | 42 degrees |
| Blade Pitch Operation Adjustment Rear | 87 degrees |
| Diameter | 69 in (1752.6 mm) |
| Rotation | 360 degrees |
| Max Lift Above Ground | 17.5 in (444.5 mm) |
