Contents
Dimensions
| Overall Length | 33.02 ft in (10064 mm) |
| Width Over Tires | 7.89 ft in (2402 mm) |
| Wheelbase | 19.44 ft in (5923 mm) |
| Rear Ground Clearance | 1.16 ft in (351 mm) |
| Tandem Axle Wheelbase | 4.96 ft in (1510 mm) |
| Front Ground Clearance | 1.16 ft in (351 mm) |
| Blade Base | 8.52 ft in (2596 mm) |
| Height To Top Of Isomount Cab | 10.94 ft in (3332 mm) |
Engine Details
| Number Of Cylinders | 6 |
| Net Power Gear 4-6 | 155 hp (115.6 kw) |
| Engine Make | CAT |
| Engine Model | 3126B DITA ATAAC VHP |
| Net Power Gear 1-2 | 135 hp (100.7 kw) |
| Power Measured @ | 2000 rpm |
| Net Power Gear 5-6 | 155 hp (115.6 kw) |
| Torque Measured @ | 1000 rpm |
| Max Power | 155 hp (115.6 kw) |
| Net Power Gears 7-8 | 155 hp (115.6 kw) |
| Net Torque Gears 7-8 | 625.5 lb ft (848 Nm) |
| Displacement | 439 cu in (7.2 L) |
Operational Specs
| Std Operation Weight – Front Axle | 8242 lb (3738.6 kg) |
| Hydraulic System Fluid Capacity | 17.7 gal (67.1 L) |
| Std Operation Weight – Rear Axle | 20598 lb (9343.1 kg) |
| Std Operation Weight – Total | 28840 lb (13081.7 kg) |
| Fuel Tank Capacity | 90 gal (340.7 L) |
| Cooling System Fluid Capacity | 10.4 gal (39.4 L) |
| Circle Gearbox Fluid Capacity | 1.8 gal (6.9 L) |
| Tandem Case Fluid Capacity (Each) | 12.7 gal (48.1 L) |
| Operating Voltage | 24 V |
| Alternator Supplied Amperage | 35 amps |
Steering
| Articulation Angle | 20 degrees |
| Turning Radius | 24 ft in (7.3 m) |
Transmission
| Transmission Type | direct drive, powershift |
| Number Of Gears – Forward | 8 |
| Number Of Gears – Reverse | 6 |
| Max Speed – Forward | 26.1 mph (42.1 km/h) |
| Max Speed – Reverse | 20.6 mph (33.2 km/h) |
Front Axle
| Wheel Lean | 18 degrees |
| Oscillation – Total | 32 degrees |
| Ground Clearance | 2 ft in (608 mm) |
Moldboard
| Moldboard Width | 12.1 ft in (3658 mm) |
| Moldboard Height | 24.1 in (610 mm) |
| Moldboard Thickness | 0.9 in (22 mm) |
| Max Depth Of Cut | 30.6 in (775 mm) |
| Side Shift Left | 20.7 in (524 mm) |
| Side Shift Right | 26 in (660 mm) |
| Blade Pull At Max Weight | 25364.2 lb (11505 kg) |
| Blade Down Pressure | 21653.9 lb (9822 kg) |
Hydraulic System
| Pump Type | Variable Piston |
| Pump Flow | 38.1 gal/min (144 L/min) |
| Relief Valve Pressure | 3500 psi (24100 kPa) |
Circle
| Shift Left | 24.7 in (625 mm) |
| Shift Right | 24.8 in (628 mm) |
| Max Reach Outside Tires – Left | 72.5 in (1840 mm) |
| Max Reach Outside Tires – Right | 75.3 in (1912 mm) |
| Max Lift Above Ground | 18 in (457 mm) |
| Blade Tip Angle – Front | 40 degrees |
| Blade Tip Angle – Rear | 5 degrees |
