Contents
Dimensions
| Overall Length | 30.64 ft in (9342 mm) |
| Width Over Tires | 9.25 ft in (2817 mm) |
| Wheelbase | 21.19 ft in (6460 mm) |
| Rear Ground Clearance | 1.25 ft in (378 mm) |
| Tandem Axle Wheelbase | 5.42 ft in (1656 mm) |
| Front Ground Clearance | 2.12 ft in (645 mm) |
| Blade Base | 9.42 ft in (2860 mm) |
| Height To Top Of Isomount Cab | 10.96 ft in (3339 mm) |
Engine Details
| Number Of Cylinders | 6 |
| Net Power Gear 4-6 | 240 hp (179 kw) |
| Engine Make | CAT |
| Engine Model | 3176 ATAAC |
| Net Power Gear 1-2 | 220 hp (164 kw) |
| Power Measured @ | 2000 rpm |
| Net Power Gear 5-6 | 240 hp (179 kw) |
| Max Power | 240 hp (179 kw) |
| Net Power Gears 7-8 | 240 hp (179 kw) |
| Displacement | 629 cu in (10.3 L) |
Operational Specs
| Std Operation Weight – Front Axle | 11695 lb (5305 kg) |
| Hydraulic System Fluid Capacity | 32.5 gal (125 L) |
| Std Operation Weight – Rear Axle | 29770 lb (13504 kg) |
| Std Operation Weight – Total | 41465 lb (18809 kg) |
| Max Operation Weight – Front Axle | 19425 lb (8811 kg) |
| Max Operation Weight – Rear Axle | 39084 lb (17729 kg) |
| Max Operation Weight – Total | 58509 lb (26540 kg) |
| Fuel Tank Capacity | 110 gal (416 L) |
| Cooling System Fluid Capacity | 12.8 gal (48.3 L) |
| Transmission Fluid Capacity | 21.6 gal (83 L) |
| Circle Gearbox Fluid Capacity | 1.6 gal (6 L) |
| Tandem Case Fluid Capacity (Each) | 25.5 gal (98 L) |
Steering
| Articulation Angle | 20 degrees |
| Turning Radius | 25.9 ft in (7.9 m) |
Transmission
| Transmission Type | direct drive, power shift, planetary |
| Number Of Gears – Forward | 8 |
| Number Of Gears – Reverse | 8 |
| Max Speed – Forward | 26.6 mph (42.7 km/h) |
| Max Speed – Reverse | 29.4 mph (47.3 km/h) |
Front Axle
| Wheel Lean | 18 degrees |
| Oscillation – Total | 32 degrees |
| Ground Clearance | 2.2 ft in (645 mm) |
Moldboard
| Moldboard Width | 14 ft in (4267 mm) |
| Moldboard Height | 27.1 in (686 mm) |
| Moldboard Thickness | 1 in (25 mm) |
| Max Depth Of Cut | 17.3 in (438 mm) |
| Side Shift Left | 25.6 in (650 mm) |
| Side Shift Right | 31.1 in (790 mm) |
| Blade Pull At Max Weight | 52659.7 lb (23886 kg) |
| Blade Down Pressure | 34517.8 lb (15657 kg) |
Hydraulic System
| Pump Type | axial piston |
| Pump Flow | 64.1 gal/min (243 L/min) |
| Relief Valve Pressure | 3500 psi (24150 kPa) |
Circle
| Diameter | 71.8 in (1822 mm) |
| Shift Left | 25.5 in (650 mm) |
| Shift Right | 20.5 in (520 mm) |
| Max Reach Outside Tires – Left | 81 in (2057 mm) |
| Max Reach Outside Tires – Right | 82 in (2082 mm) |
| Max Lift Above Ground | 16.5 in (419 mm) |
| Blade Tip Angle – Front | 40 degrees |
| Blade Tip Angle – Rear | 5 degrees |
