Engine Details
| Number Of Cylinders | 6 |
| Torque Rise | 41 % |
| Displacement | 763 cu in (12.6 L) |
| Bore | 5.1 in (129.6 mm) |
| Stroke | 6.2 in (157.5 mm) |
| Emissions | Tier 4 Final/Stage IV, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent |
| Engine Model | Cat C13 ACERT VHP |
| Note (1) | Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. |
| Note (2) | Optimized VHP Plus is standard for the 14M3. |
| Note (3) | Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
| Note (4) | Power as declared per ISO 14396 Rated rpm 1,850 VHP+ = 228 kW (306 hp) |
| Note (5) | Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. |
| Base Power (1st Gear) – Net | 238 hp (177.5 kw) |
| Standard Capability | 122 degrees |
| Speed At Rated Power | 1,850 rpm |
| Maximum Altitude – Full Power (Tier 2) | 12049 ft in (3672.6 m) |
| Maximum Torque – Vhp Plus | 1137 lb ft (1541.6 Nm) |
Frame
| Front Axle – Total Oscillation Per Side | 32 degrees |
| Front Axle – Wheel Lean – Left/Right | 17.1 degrees |
Engine Details
| Standard – Fan Speed – Maximum | 1,600 rpm |
| Standard – Fan Speed – Minimum | 550 rpm |
| Maximum Altitude – Full Power | 13900 ft in (4236.8 m) |
| Maximum Altitude – Full Power (Tier 3) | 14349 ft in (4373.6 m) |
Frame
| Circle – Outer Diameter | 71.7 in (1821.2 mm) |
Weights
| Note | *Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab. |
| Gross Vehicle Weight – Typically Equipped – Rear Axle | 42005 lb (19053.2 kg) |
| Gross Vehicle Weight – Typically Equipped – Front Axle | 15245 lb (6915.1 kg) |
| Gross Vehicle Weight – Typically Equipped – Total | 57250 lb (25968.2 kg) |
| Operating Weight – Typically Equipped | 57250 lb (25968.2 kg) |
| Gross Vehicle Weight – Base* – Total | 50980 lb (23124.2 kg) |
| Gross Vehicle Weight – Base* – Front Axle | 13994 lb (6347.6 kg) |
| Gross Vehicle Weight – Base* – Rear Axle | 36994 lb (16780.2 kg) |
Moldboard
| Blade Width | 14 ft in (4.3 m) |
| Arc Radius | 16.3 in (414.1 mm) |
| Throat Clearance | 4.6 in (116.9 mm) |
| Blade Width – With End Bits | 169 in (4292.6 mm) |
| Blade Width – Without End Bits | 164 in (4165.6 mm) |
| Blade Height – With Cutting Edge | 24.9 in (632.5 mm) |
| Blade Height – Without Cutting Edge | 23 in (584.2 mm) |
Air Conditioning System
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton). |
Blade Range
| Circle Centershift – Right | 20.5 in (520.7 mm) |
| Circle Centershift – Left | 25.6 in (650.3 mm) |
| Moldboard Sideshift – Right | 31.1 in (790 mm) |
| Moldboard Sideshift – Left | 29.1 in (739.2 mm) |
| Blade Tip Range – Forward | 40 degrees |
| Blade Tip Range – Backward | 5 degrees |
| Maximum Shoulder Reach Outside Of Tires – Right | 78.9 in (2004.1 mm) |
| Maximum Shoulder Reach Outside Of Tires – Left | 73.6 in (1869.5 mm) |
| Maximum Lift Above Ground | 16.5 in (419.1 mm) |
| Maximum Depth Of Cut | 23.3 in (591.9 mm) |
