Contents
Dimensions
| Overall Length | 28.58 ft in (8713 mm) |
| Width Over Tires | 8.39 ft in (2553 mm) |
| Wheelbase | 20.25 ft in (6169 mm) |
| Rear Ground Clearance | 1.13 ft in (344 mm) |
| Tandem Axle Wheelbase | 5 ft in (1523 mm) |
| Front Ground Clearance | 2.05 ft in (625 mm) |
| Blade Base | 8.26 ft in (2518 mm) |
| Height To Top Of Isomount Cab | 10.25 ft in (3131 mm) |
Engine Details
| Net Power Gear 4-6 | 200 hp (149 kw) |
| Engine Make | CAT |
| Engine Model | 3176C DITA ATAAC VHP |
| Net Power Gear 1-2 | 180 hp (134 kw) |
| Net Power Gear 5-6 | 200 hp (149 kw) |
| Max Power | 220 hp (164.1 kw) |
| Net Power Gears 7-8 | 220 hp (164.1 kw) |
| Displacement | 629 cu in (10.3 L) |
Operational Specs
| Std Operation Weight – Front Axle | 10119 lb (4589 kg) |
| Hydraulic System Fluid Capacity | 20.8 gal (80 L) |
| Std Operation Weight – Rear Axle | 25771 lb (11691 kg) |
| Std Operation Weight – Total | 35890 lb (16280 kg) |
| Max Operation Weight – Front Axle | 18322 lb (8311 kg) |
| Max Operation Weight – Rear Axle | 33004 lb (14970 kg) |
| Max Operation Weight – Total | 51326 lb (23281 kg) |
| Fuel Tank Capacity | 105 gal (397 L) |
| Cooling System Fluid Capacity | 10 gal (38 L) |
| Rear Diff/Final Drive Fluid Capacity | 12.4 gal (47 L) |
| Circle Gearbox Fluid Capacity | 1.8 gal (7 L) |
| Tandem Case Fluid Capacity (Each) | 21.1 gal (80 L) |
Steering
| Articulation Angle | 20 degrees |
| Turning Radius | 24.6 ft in (7.5 m) |
Transmission
| Transmission Type | direct drive, power shift |
| Number Of Gears – Forward | 8 |
| Number Of Gears – Reverse | 6 |
| Max Speed – Forward | 27.1 mph (43.6 km/h) |
| Max Speed – Reverse | 21.4 mph (34.4 km/h) |
Front Axle
| Wheel Lean | 18 degrees |
| Oscillation – Total | 32 degrees |
| Ground Clearance | 2.1 ft in (625 mm) |
Moldboard
| Moldboard Width | 14 ft in (4267 mm) |
| Moldboard Height | 27 in (686 mm) |
| Moldboard Thickness | 1 in (25 mm) |
| Max Depth Of Cut | 30.3 in (770 mm) |
| Side Shift Left | 33.5 in (851 mm) |
| Side Shift Right | 37.1 in (943 mm) |
| Blade Pull At Max Weight | 46193 lb (20953 kg) |
| Blade Down Pressure | 31669.5 lb (14365 kg) |
Hydraulic System
| Pump Type | axial piston |
| Pump Flow | 54.4 gal/min (206 L/min) |
| Relief Valve Pressure | 3500 psi (24150 kPa) |
Circle
| Diameter | 60.2 in (1530 mm) |
| Shift Left | 33.4 in (848 mm) |
| Shift Right | 34.7 in (881 mm) |
| Max Reach Outside Tires – Left | 87.5 in (2223 mm) |
| Max Reach Outside Tires – Right | 89 in (2261 mm) |
| Max Lift Above Ground | 17.8 in (452 mm) |
| Blade Tip Angle – Front | 40 degrees |
| Blade Tip Angle – Rear | 5 degrees |
