Dressta RD165C Motor Grader


Dimensions

Overall Length 28.55 ft in (8700 mm)
Width Over Tires 8.37 ft in (2550 mm)
Wheelbase 20.84 ft in (6350 mm)
Tandem Axle Wheelbase 4.92 ft in (1498 mm)
Blade Base 8.54 ft in (2600 mm)
Height To Top Of Isomount Cab 11.49 ft in (3500 mm)

Engine Details

Number Of Cylinders 6
Engine Make Cummins
Engine Model QSB 6.7
Power Measured @ 2500 rpm
Net Power Gear 5-6 160 hp (119.4 kw)
Torque Measured @ 1500 rpm
Max Power 160 hp (119.4 kw)
Net Torque Gears 5-6 590.1 lb ft (800 Nm)
Displacement 408.9 cu in (6.7 L)
Aspiration turbocharged and CAC

Operational Specs

Hydraulic System Fluid Capacity 31 gal (117 L)
Std Operation Weight – Total 31526.2 lb (14300 kg)
Fuel Tank Capacity 85.9 gal (325 L)
Cooling System Fluid Capacity 10.6 gal (40 L)
Transmission Fluid Capacity 9.3 gal (35 L)
Rear Diff/Final Drive Fluid Capacity 9.3 gal (35 L)
Tandem Case Fluid Capacity (Each) 6.7 gal (25 L)
Tire Size 16.9-24 IND TI04 12PR
Operating Voltage 24 V
Alternator Supplied Amperage 75 amps

Steering

Articulation Angle 27 degrees
Turning Radius 23 ft in (7 m)

Transmission

Transmission Type powershift transmission
Number Of Gears – Forward 6
Number Of Gears – Reverse 3
Max Speed – Forward 24.9 mph (40 km/h)
Max Speed – Reverse 16.8 mph (27 km/h)

Front Axle

Wheel Lean 22 degrees
Oscillation – Total 40 degrees
Ground Clearance 2 ft in (600 mm)

Moldboard

Moldboard Width 12 ft in (3640 mm)
Moldboard Height 25.6 in (650 mm)
Moldboard Thickness 0.7 in (16 mm)
Max Depth Of Cut 13.8 in (350 mm)
Side Shift Left 31.5 in (800 mm)
Side Shift Right 31.5 in (800 mm)

Hydraulic System

Pump Type axial piston pump
Pump Flow 16.3 gal/min (61.6 L/min)
Relief Valve Pressure 2030.6 psi (14000 kPa)

Circle

Diameter 53.2 in (1350 mm)
Rotation 360 degrees
Max Lift Above Ground 19.7 in (500 mm)
Ask a question