Dressta RD200C Motor Grader


Dimensions

Overall Length 31.3 ft in (9540 mm)
Width Over Tires 8.21 ft in (2500 mm)
Wheelbase 23.96 ft in (7300 mm)
Tandem Axle Wheelbase 5.06 ft in (1540 mm)
Blade Base 10.01 ft in (3050 mm)
Height To Top Of Isomount Cab 10.83 ft in (3300 mm)

Engine Details

Number Of Cylinders 6
Engine Make Cummins
Engine Model QSB 6.7
Power Measured @ 2400 rpm
Net Power Gear 5-6 178 hp (132.8 kw)
Torque Measured @ 1500 rpm
Max Power 178 hp (132.8 kw)
Net Torque Gears 5-6 685.2 lb ft (929 Nm)
Displacement 409 cu in (6.8 L)
Aspiration turbocharged and CAC

Operational Specs

Hydraulic System Fluid Capacity 34.4 gal (130 L)
Std Operation Weight – Total 80195.4 lb (36376 kg)
Fuel Tank Capacity 100.4 gal (380 L)
Cooling System Fluid Capacity 10.6 gal (40 L)
Transmission Fluid Capacity 9.3 gal (35 L)
Rear Diff/Final Drive Fluid Capacity 2 gal (7.5 L)
Tandem Case Fluid Capacity (Each) 8 gal (30 L)
Tire Size 14.00 – 24 G-2 16PR
Operating Voltage 24 V
Alternator Supplied Amperage 75 amps

Steering

Articulation Angle 25 degrees
Turning Radius 24606.3 ft in (7500 m)

Transmission

Transmission Type powershift transmission
Number Of Gears – Forward 6
Number Of Gears – Reverse 3
Max Speed – Forward 27.8 mph (44.7 km/h)
Max Speed – Reverse 19.6 mph (31.4 km/h)

Front Axle

Wheel Lean 22 degrees
Oscillation – Total 40 degrees
Ground Clearance 1.9 ft in (550 mm)

Moldboard

Moldboard Width 12.1 ft in (3660 mm)
Moldboard Height 26.4 in (670 mm)
Moldboard Thickness 0.9 in (22 mm)
Max Depth Of Cut 13.8 in (350 mm)
Side Shift Left 31.5 in (800 mm)
Side Shift Right 31.5 in (800 mm)

Hydraulic System

Pump Type axial piston pump
Pump Flow 21.2 gal/min (80 L/min)
Relief Valve Pressure 2030.6 psi (14000 kPa)

Circle

Diameter 53.2 in (1350 mm)
Rotation 360 degrees
Max Lift Above Ground 19.7 in (500 mm)
Ask a question