Fiat-Hitachi FG105A Motor Grader


Dimensions

Overall Length 27.96 ft in (8521 mm)
Width Over Tires 8.34 ft in (2540 mm)
Wheelbase 5.05 ft in (1538 mm)
Rear Ground Clearance 1.09 ft in (331 mm)
Tandem Axle Wheelbase 19.59 ft in (5969 mm)
Front Ground Clearance 2.09 ft in (635 mm)
Blade Base 8.67 ft in (2642 mm)
Height To Top Of Isomount Cab 10.96 ft in (3340 mm)

Engine Details

Number Of Cylinders 6
Engine Make Cummins
Engine Model 6 CT8.3
Power Measured @ 2300 rpm
Net Power Gear 5-6 197.2 hp (147 kw)
Torque Measured @ 1500 rpm
Max Power 197.2 hp (147 kw)
Net Torque Gears 7-8 555.4 lb ft (753 Nm)
Displacement 506.5 cu in (8.3 L)
Aspiration Turbocharged

Operational Specs

Hydraulic System Fluid Capacity 25 gal (94.6 L)
Max Operation Weight – Front Axle 9656.3 lb (4380 kg)
Max Operation Weight – Rear Axle 25728 lb (11670 kg)
Oil System Fluid Capacity 5.4 gal (20.3 L)
Max Operation Weight – Total 35384.2 lb (16050 kg)
Fuel Tank Capacity 79 gal (299 L)
Cooling System Fluid Capacity 7.2 gal (27 L)
Transmission Fluid Capacity 6.7 gal (25 L)
Rear Diff/Final Drive Fluid Capacity 11.1 gal (42 L)
Circle Gearbox Fluid Capacity 0.8 gal (2.8 L)
Tandem Case Fluid Capacity (Each) 8.1 gal (30.3 L)
Tire Size 13X24(10PR)
Operating Voltage 24 V
Alternator Supplied Amperage 45 amps

Steering

Articulation Angle 25 degrees
Turning Radius 23.7 ft in (7.3 m)

Transmission

Transmission Type full powershift
Number Of Gears – Forward 6
Number Of Gears – Reverse 3
Max Speed – Forward 26.1 mph (42 km/h)
Max Speed – Reverse 17.1 mph (27.4 km/h)

Front Axle

Wheel Lean 17.5 degrees
Oscillation – Total 19 degrees
Ground Clearance 2.1 ft in (635 mm)

Moldboard

Moldboard Width 9.1 ft in (2762 mm)
Moldboard Height 37.6 in (953 mm)
Max Depth Of Cut 6.5 in (165 mm)
Side Shift Left 21 in (533 mm)
Side Shift Right 27 in (685 mm)
Blade Down Pressure 17174.1 lb (7790 kg)

Hydraulic System

Pump Type full hydraulic, variable displacement
Pump Flow 43.1 gal/min (163 L/min)
Relief Valve Pressure 414.4 psi (2857 kPa)

Circle

Diameter 69.1 in (1753 mm)
Rotation 360 degrees
Max Reach Outside Tires – Left 104.7 in (2657 mm)
Max Reach Outside Tires – Right 107.6 in (2733 mm)
Max Lift Above Ground 24.5 in (622 mm)
Blade Tip Angle – Rear 27.5 degrees
Ask a question