John Deere 570A Motor Grader

Dimensions

Overall Length 26.71 ft in (8140 mm)
Wheelbase 17.33 ft in (5280 mm)
Tandem Axle Wheelbase 4.73 ft in (1440 mm)
Front Ground Clearance 1.96 ft in (597 mm)
Blade Base 7.68 ft in (2340 mm)
Height To Top Of Isomount Cab 10.5 ft in (3200 mm)

Engine Details

Torque 238 lb ft (322.7 Nm)
Number Of Cylinders 6
Gross Horsepower 92 hp (68.7 kw)
Net Power 85 hp (63.4 kw)
Power Measured @ 2300 rpm
Torque Measured @ 1300 rpm
Displacement 329 cu in (5.4 L)
Bore 4.1 in (102 mm)
Stroke 4.4 in (110 mm)
Aspiration Turbochraged

Operational Specs

Std Operation Weight – Front Axle 5749.7 lb (2608 kg)
Std Operation Weight – Rear Axle 14319.1 lb (6495 kg)
Hydraulic System Fluid Capacity 21.1 gal (79.5 L)
Std Operation Weight – Total 20024.6 lb (9083 kg)
Max Operation Weight – Front Axle 6752.8 lb (3063 kg)
Max Operation Weight – Rear Axle 14749 lb (6690 kg)
Oil System Fluid Capacity 3.1 gal (11.4 L)
Max Operation Weight – Total 21104.9 lb (9573 kg)
Fuel Tank Capacity 50.1 gal (189.3 L)
Cooling System Fluid Capacity 5.7 gal (21.2 L)
Circle Gearbox Fluid Capacity 0.4 gal (1.4 L)
Tandem Case Fluid Capacity (Each) 5 gal (18.9 L)
Tire Size 13.00-24
Operating Voltage 12 V

Steering

Articulation Angle 22 degrees
Turning Radius 18 ft in (5.5 m)

Transmission

Transmission Type Power Shift
Number Of Gears – Forward 8
Number Of Gears – Reverse 4
Max Speed – Forward 21.7 mph (34.8 km/h)
Max Speed – Reverse 7.1 mph (11.4 km/h)

Front Axle

Wheel Lean 20 degrees
Oscillation – Total 30 degrees
Ground Clearance 2 ft in (597 mm)

Moldboard

Moldboard Length 12.1 ft in (3660 mm)
Moldboard Height 22.1 in (559 mm)
Moldboard Thickness 0.8 in (19.1 mm)
Side Shift Left 31.3 in (794 mm)
Side Shift Right 26.8 in (679 mm)

Hydraulic System

Pump Type Closed-center
Pump Flow 27 gal/min (102.3 L/min)
Relief Valve Pressure 2000 psi (13789.6 kPa)

Circle

Diameter 54 in (1370 mm)
Rotation 360 degrees
Max Reach Outside Tires – Left 77.2 in (1960 mm)
Max Reach Outside Tires – Right 71.7 in (1820 mm)
Max Lift Above Ground 13 in (330 mm)
Blade Tip Angle – Front 45 degrees
Blade Tip Angle – Rear 5 degrees
Ask a question