Contents
Dimensions
| Overall Length | 28.89 ft in (8804 mm) |
| Width Over Tires | 8.67 ft in (2640 mm) |
| Wheelbase | 20.08 ft in (6120 mm) |
| Tandem Axle Wheelbase | 5.06 ft in (1540 mm) |
| Front Ground Clearance | 1.93 ft in (587 mm) |
| Blade Base | 8.32 ft in (2533 mm) |
| Height To Top Of Isomount Cab | 10.44 ft in (3180 mm) |
Engine Details
| Number Of Cylinders | 6 |
| Net Power Gear 4-6 | 230 hp (172 kw) |
| Engine Make | John Deere |
| Engine Model | 6081H |
| Net Power Gear 1-2 | 205 hp (153 kw) |
| Power Measured @ | 2000 rpm |
| Net Power Gear 5-6 | 245 hp (182.7 kw) |
| Torque Measured @ | 1000 rpm |
| Max Power | 245 hp (182.7 kw) |
| Net Power Gears 7-8 | 235 hp (175.3 kw) |
| Net Torque Gears 1-2 | 793 lb ft (1075 Nm) |
| Net Torque Gears 3-4 | 835 lb ft (1132 Nm) |
| Net Torque Gears 5-6 | 872 lb ft (1182 Nm) |
| Net Torque Gears 7-8 | 942 lb ft (1277 Nm) |
| Displacement | 494 cu in (8.1 L) |
| Aspiration | Turbocharged with air-to-air after cooler |
Operational Specs
| Std Operation Weight – Front Axle | 10170 lb (4613 kg) |
| Std Operation Weight – Rear Axle | 26040 lb (11812 kg) |
| Hydraulic System Fluid Capacity | 14 gal (53 L) |
| Std Operation Weight – Total | 36210 lb (16421 kg) |
| Max Operation Weight – Front Axle | 16023.2 lb (7268 kg) |
| Max Operation Weight – Rear Axle | 32577.8 lb (14777 kg) |
| Max Operation Weight – Total | 48601 lb (22045 kg) |
| Fuel Tank Capacity | 106 gal (401.2 L) |
| Cooling System Fluid Capacity | 13 gal (49.2 L) |
| Transmission Fluid Capacity | 6 gal (22.7 L) |
| Rear Diff/Final Drive Fluid Capacity | 9.5 gal (36 L) |
| Circle Gearbox Fluid Capacity | 1.5 gal (5.7 L) |
| Tandem Case Fluid Capacity (Each) | 20 gal (75.7 L) |
| Tire Size | 17.5R25 Radial PR |
| Operating Voltage | 24 V |
| Alternator Supplied Amperage | 100 amps |
Steering
| Articulation Angle | 22 degrees |
| Turning Radius | 23.5 ft in (7.2 m) |
Transmission
| Transmission Type | Powershift with direct drive |
| Number Of Gears – Forward | 8 |
| Number Of Gears – Reverse | 8 |
| Max Speed – Forward | 25.6 mph (41.1 km/h) |
| Max Speed – Reverse | 25.6 mph (41.1 km/h) |
Front Axle
| Wheel Lean | 20 degrees |
| Oscillation – Total | 32 degrees |
| Ground Clearance | 2 ft in (587 mm) |
Moldboard
| Moldboard Width | 14.2 ft in (4300 mm) |
| Moldboard Height | 27.1 in (686 mm) |
| Moldboard Thickness | 1 in (25 mm) |
| Side Shift Left | 26.8 in (680 mm) |
| Side Shift Right | 26.8 in (680 mm) |
| Blade Pull At Max Weight | 43760 lb (19849 kg) |
Hydraulic System
| Pump Type | Variable-displacement piston |
| Pump Flow | 54.7 gal/min (207 L/min) |
| Relief Valve Pressure | 2750 psi (18960.6 kPa) |
Circle
| Diameter | 59.9 in (1520 mm) |
| Rotation | 360 degrees |
| Shift Left | 31 in (787 mm) |
| Shift Right | 28.6 in (724 mm) |
| Max Reach Outside Tires – Left | 91.4 in (2320 mm) |
| Max Reach Outside Tires – Right | 91 in (2310 mm) |
| Max Lift Above Ground | 17.3 in (437 mm) |
| Blade Tip Angle – Front | 42 degrees |
| Blade Tip Angle – Rear | 5 degrees |
