John Deere JD570 Motor Grader


Dimensions

Overall Length 24.33 ft in (7415.79 mm)
Width Over Tires 7.83 ft in (2386.59 mm)
Wheelbase 17.33 ft in (5282.19 mm)
Tandem Axle Wheelbase 4.75 ft in (1447.8 mm)
Front Ground Clearance 1.96 ft in (597.41 mm)
Blade Base 7.67 ft in (2337.82 mm)
Height To Top Of Isomount Cab 10.5 ft in (3200.4 mm)

Engine Details

Engine Make John Deere
Power Measured @ 2300 rpm
Torque Measured @ 1300 rpm
Max Power 83 hp (61.9 kw)
Net Power Gears 7-8 83 hp (61.9 kw)
Net Torque Gears 7-8 212 lb ft (287.5 Nm)
Displacement 303.6 cu in (5 L)
Aspiration Natural

Operational Specs

Std Operation Weight – Front Axle 5500 lb (2494.8 kg)
Hydraulic System Fluid Capacity 21 gal (79.5 L)
Std Operation Weight – Rear Axle 12600 lb (5715.3 kg)
Std Operation Weight – Total 20278 lb (9198 kg)
Max Operation Weight – Front Axle 5800 lb (2630.9 kg)
Max Operation Weight – Rear Axle 13600 lb (6168.9 kg)
Max Operation Weight – Total 18100 lb (8210.1 kg)
Oil System Fluid Capacity 2.5 gal (9.5 L)
Fuel Tank Capacity 50 gal (189.3 L)
Cooling System Fluid Capacity 5.5 gal (20.9 L)
Circle Gearbox Fluid Capacity 1.5 gal (5.7 L)
Tandem Case Fluid Capacity (Each) 5 gal (19 L)
Tire Size 13.00-24
Operating Voltage 12 V

Steering

Articulation Angle 22 degrees
Turning Radius 18 ft in (5.5 m)

Transmission

Transmission Type Power shift
Number Of Gears – Forward 8
Number Of Gears – Reverse 4
Max Speed – Forward 21.4 mph (34.5 km/h)
Max Speed – Reverse 6.8 mph (10.9 km/h)

Front Axle

Wheel Lean 20 degrees
Oscillation – Total 30 degrees
Ground Clearance 2 ft in (597.5 mm)

Moldboard

Moldboard Width 12 ft in (3657.6 mm)
Moldboard Height 24 in (609.6 mm)
Moldboard Thickness 0.7 in (15.8 mm)
Side Shift Left 26.8 in (679.5 mm)
Side Shift Right 31.3 in (793.8 mm)

Hydraulic System

Pump Type Piston Pump
Pump Flow 26.9 gal/min (101.9 L/min)
Relief Valve Pressure 2000 psi (13789.6 kPa)

Circle

Diameter 54 in (1371.6 mm)
Rotation 360 degrees
Max Lift Above Ground 12.3 in (311.2 mm)
Ask a question