John Deere JD670 Motor Grader


Dimensions

Overall Length 27.27 ft in (8310 mm)
Width Over Tires 7.68 ft in (2340 mm)
Wheelbase 19.59 ft in (5970 mm)
Tandem Axle Wheelbase 5.06 ft in (1540 mm)
Front Ground Clearance 1.84 ft in (559 mm)
Blade Base 8.34 ft in (2540 mm)
Height To Top Of Isomount Cab 10.5 ft in (3200 mm)

Engine Details

Number Of Cylinders 6
Engine Make John Deere
Power Measured @ 2300 rpm
Torque Measured @ 1300 rpm
Max Power 125 hp (93.3 kw)
Net Power Gears 7-8 125 hp (93.3 kw)
Net Torque Gears 7-8 372 lb ft (504.4 Nm)
Displacement 414 cu in (6.8 L)
Aspiration Turbocharged

Operational Specs

Std Operation Weight – Front Axle 7653 lb (3471 kg)
Std Operation Weight – Rear Axle 18177 lb (8245 kg)
Hydraulic System Fluid Capacity 28 gal (106 L)
Std Operation Weight – Total 25830 lb (11716 kg)
Max Operation Weight – Front Axle 7970 lb (3615 kg)
Max Operation Weight – Rear Axle 21474 lb (9741 kg)
Max Operation Weight – Total 29444 lb (13356 kg)
Oil System Fluid Capacity 5 gal (18.9 L)
Fuel Tank Capacity 60 gal (227 L)
Cooling System Fluid Capacity 7 gal (26.5 L)
Circle Gearbox Fluid Capacity 3 gal (2.8 L)
Tandem Case Fluid Capacity (Each) 4 gal (15.1 L)
Tire Size 13.00-24
Operating Voltage 24 V

Steering

Articulation Angle 25 degrees
Turning Radius 22.1 ft in (6.8 m)

Transmission

Transmission Type Power Shift
Number Of Gears – Forward 8
Number Of Gears – Reverse 4
Max Speed – Forward 23.9 mph (38.4 km/h)
Max Speed – Reverse 7.6 mph (12.3 km/h)

Front Axle

Wheel Lean 20 degrees
Oscillation – Total 30 degrees
Ground Clearance 1.9 ft in (559 mm)

Moldboard

Moldboard Width 12 ft in (3.7 mm)
Moldboard Height 24 in (610 mm)
Moldboard Thickness 0.9 in (22 mm)
Side Shift Left 26.9 in (683 mm)
Side Shift Right 26.9 in (683 mm)

Hydraulic System

Pump Type Colsed Center Variable Displacement
Pump Flow 35 gal/min (132 L/min)
Relief Valve Pressure 2250 psi (15513.2 kPa)

Circle

Diameter 57.9 in (1470 mm)
Rotation 360 degrees
Max Reach Outside Tires – Left 83.9 in (2130 mm)
Max Reach Outside Tires – Right 83.9 in (2130 mm)
Max Lift Above Ground 16.2 in (409 mm)
Blade Tip Angle – Front 35 degrees
Ask a question