New Holland F140 Motor Grader

Dimensions

Overall Length 27.96 ft in (8521 mm)
Width Over Tires 8.24 ft in (2510 mm)
Wheelbase 20.41 ft in (6219 mm)
Rear Ground Clearance 2.01 ft in (610 mm)
Tandem Axle Wheelbase 5.23 ft in (1594 mm)
Blade Base 8.41 ft in (2562 mm)
Height To Top Of Isomount Cab 10.96 ft in (3340 mm)

Engine Details

Engine Make Cummins
Engine Model 6BTA5.9 Tier 1
Power Measured @ 2200 rpm
Net Torque Gears 7-8 104 lb ft (141.1 Nm)
Displacement 360.1 cu in (5.9 L)
Aspiration Turbocharged

Operational Specs

Hydraulic System Fluid Capacity 25 gal (94.6 L)
Max Operation Weight – Front Axle 8172.6 lb (3707 kg)
Max Operation Weight – Rear Axle 21667.1 lb (9828 kg)
Max Operation Weight – Total 29839.6 lb (13535 kg)
Oil System Fluid Capacity 3.8 gal (14.2 L)
Fuel Tank Capacity 89.9 gal (340 L)
Cooling System Fluid Capacity 10.6 gal (40 L)
Transmission Fluid Capacity 6.7 gal (25 L)
Circle Gearbox Fluid Capacity 0.8 gal (2.8 L)
Tandem Case Fluid Capacity (Each) 8 gal (30 L)
Tire Size 13.00 x 24 (12PR)
Operating Voltage 24 V
Alternator Supplied Amperage 70 amps

Steering

Articulation Angle 25 degrees
Turning Radius 24 ft in (7.3 m)

Transmission

Transmission Type Direct Drive Power-Shift
Number Of Gears – Forward 8
Number Of Gears – Reverse 4
Max Speed – Forward 26.8 mph (43 km/h)
Max Speed – Reverse 17.8 mph (28.5 km/h)

Front Axle

Wheel Lean 18 degrees
Oscillation – Total 19 degrees
Ground Clearance 2.1 ft in (622 mm)

Moldboard

Moldboard Width 12.1 ft in (3658 mm)
Moldboard Height 24.5 in (622 mm)
Moldboard Thickness 0.9 in (22 mm)
Max Depth Of Cut 28.1 in (712 mm)
Side Shift Left 21 in (533 mm)
Side Shift Right 27.1 in (686 mm)
Blade Down Pressure 19039.2 lb (8636 kg)

Hydraulic System

Pump Type Full Hydraulic Load Sensing
Pump Flow 50.8 gal/min (192 L/min)
Relief Valve Pressure 2596.2 psi (17900 kPa)

Circle

Diameter 69.1 in (1753 mm)
Rotation 360 degrees
Max Reach Outside Tires – Left 62.3 in (1582 mm)
Max Reach Outside Tires – Right 68.6 in (1742 mm)
Max Lift Above Ground 17.5 in (444 mm)
Blade Tip Angle – Front 40 degrees
Blade Tip Angle – Rear 5 degrees
Ask a question