New Holland G140 Motor Grader


Dimensions

Overall Length 27.96 ft in (8521 mm)
Width Over Tires 8.24 ft in (2510 mm)
Wheelbase 20.41 ft in (6219 mm)
Rear Ground Clearance 2.05 ft in (622 mm)
Tandem Axle Wheelbase 5.23 ft in (1594 mm)
Front Ground Clearance 1.25 ft in (378 mm)
Blade Base 8.41 ft in (2562 mm)
Height To Top Of Isomount Cab 10.31 ft in (3140 mm)

Engine Details

Number Of Cylinders 6
Engine Make Cummins
Engine Model QSB 6.7L
Power Measured @ 2200 rpm
Torque Measured @ 1500 rpm
Max Power 160 hp (119.4 kw)
Net Power Gears 7-8 160 hp (119.4 kw)
Net Torque Gears 7-8 550.3 lb ft (746 Nm)
Displacement 408.9 cu in (6.7 L)
Aspiration Turbocharged

Operational Specs

Std Operation Weight – Front Axle 8172 lb (3706.8 kg)
Hydraulic System Fluid Capacity 47.5 gal (179.9 L)
Std Operation Weight – Rear Axle 21746 lb (9863.9 kg)
Std Operation Weight – Total 29918 lb (13570.6 kg)
Fuel Tank Capacity 90 gal (340.7 L)
Cooling System Fluid Capacity 10.5 gal (39.8 L)
Transmission Fluid Capacity 4.7 gal (17.8 L)
Circle Gearbox Fluid Capacity 0.8 gal (2.9 L)
Tandem Case Fluid Capacity (Each) 7.7 gal (29.2 L)
Tire Size 14.00X24 10 Ply G2
Operating Voltage 24 V
Alternator Supplied Amperage 80 amps

Steering

Articulation Angle 25 degrees
Turning Radius 23786.1 ft in (7250 m)

Transmission

Transmission Type Full power shift direct drive
Number Of Gears – Forward 8
Number Of Gears – Reverse 4
Max Speed – Forward 26.6 mph (42.9 km/h)
Max Speed – Reverse 17.7 mph (28.5 km/h)

Front Axle

Wheel Lean 17.5 degrees
Oscillation – Total 19 degrees
Ground Clearance 2.1 ft in (622 mm)

Moldboard

Moldboard Width 12 ft in (3657.6 mm)
Moldboard Height 24.5 in (622 mm)
Moldboard Thickness 0.9 in (22 mm)
Side Shift Left 21 in (533 mm)
Side Shift Right 28 in (711 mm)
Blade Down Pressure 14788 lb (6707.8 kg)

Hydraulic System

Pump Type Piston pump, variable displacement
Pump Flow 49 gal/min (185.5 L/min)
Relief Valve Pressure 2600 psi (17926.4 kPa)

Circle

Diameter 69.1 in (1753 mm)
Rotation 360 degrees
Max Reach Outside Tires – Left 77.9 in (1978 mm)
Max Reach Outside Tires – Right 85.6 in (2174 mm)
Max Lift Above Ground 17.6 in (445 mm)
Blade Tip Angle – Front 5 degrees
Blade Tip Angle – Rear 42 degrees
Ask a question