Terex TG150TA-3 Motor Grader

Dimensions

Overall Length 30.83 ft in (9402 mm)
Width Over Tires 7.83 ft in (2419 mm)
Wheelbase 19.43 ft in (5676 mm)
Rear Ground Clearance 18.61 ft in (474 mm)
Tandem Axle Wheelbase 5.08 ft in (510 mm)
Front Ground Clearance 18.61 ft in (474 mm)
Blade Base 7.17 ft in (2204 mm)
Height To Top Of Isomount Cab 10.75 ft in (3276 mm)

Engine Details

Engine Make Cummins
Net Power Gear 5-6 163 hp (121.6 kw)
Max Power 163 hp (121.6 kw)
Displacement 366 cu in (6 L)
Aspiration Diesel

Operational Specs

Std Operation Weight – Front Axle 9480 lb (4300 kg)
Hydraulic System Fluid Capacity 100 gal (150 L)
Std Operation Weight – Rear Axle 22487 lb (10200 kg)
Std Operation Weight – Total 31967 lb (14500 kg)
Fuel Tank Capacity 81.9 gal (310 L)
Cooling System Fluid Capacity 11.9 gal (45 L)
Transmission Fluid Capacity 4.8 gal (18 L)
Rear Diff/Final Drive Fluid Capacity 3.9 gal (15 L)
Circle Gearbox Fluid Capacity 1.6 gal (6 L)
Tandem Case Fluid Capacity (Each) 5.3 gal (20 L)
Tire Size 13.00 -24 TG SGG-2A Goodyear
Operating Voltage 24 V
Alternator Supplied Amperage 55 amps

Steering

Articulation Angle 45 degrees
Turning Radius 22.6 ft in (6900 m)

Transmission

Transmission Type Auto Power Shift Tansmission With torque Converter
Number Of Gears – Forward 6
Number Of Gears – Reverse 3
Max Speed – Forward 24.9 mph (40 km/h)
Max Speed – Reverse 15.5 mph (25 km/h)

Front Axle

Wheel Lean 17 degrees
Oscillation – Total 15 degrees
Ground Clearance 21.5 ft in (546 mm)

Moldboard

Moldboard Width 12 ft in (3660 mm)
Moldboard Height 18.9 in (580 mm)
Moldboard Thickness 0.8 in (20 mm)
Side Shift Left 4.1 in (1250 mm)
Side Shift Right 4.1 in (1250 mm)
Blade Pull At Max Weight 25681 lb (11648.7 kg)

Hydraulic System

Pump Type Axial Piston Pump
Pump Flow 26.1 gal/min (99 L/min)
Relief Valve Pressure 2669 psi (127.8 kPa)

Circle

Diameter 4.5 in (1348 mm)
Max Lift Above Ground 18.9 in (480 mm)
Ask a question