Terex TG190 Motor Grader


Dimensions

Overall Length 33.69 ft in (10266 mm)
Width Over Tires 8.17 ft in (2490 mm)
Wheelbase 20.14 ft in (6136 mm)
Rear Ground Clearance 1.56 ft in (474 mm)
Tandem Axle Wheelbase 5.06 ft in (1542 mm)
Front Ground Clearance 1.94 ft in (591 mm)
Blade Base 8.66 ft in (2638 mm)
Height To Top Of Isomount Cab 10.83 ft in (3300 mm)

Engine Details

Number Of Cylinders 6
Engine Make Cummins
Power Measured @ 2000 rpm
Net Power Gear 5-6 185 hp (138 kw)
Max Power 185 hp (138 kw)
Displacement 366 cu in (6 L)
Aspiration Turbocharged

Operational Specs

Std Operation Weight – Front Axle 11023.2 lb (5000 kg)
Std Operation Weight – Rear Axle 30203.4 lb (13700 kg)
Hydraulic System Fluid Capacity 45 gal (170 L)
Std Operation Weight – Total 41226.5 lb (18700 kg)
Fuel Tank Capacity 126.9 gal (480 L)
Cooling System Fluid Capacity 11.1 gal (42 L)
Transmission Fluid Capacity 9 gal (34 L)
Circle Gearbox Fluid Capacity 1.6 gal (6 L)
Tandem Case Fluid Capacity (Each) 11.1 gal (42 L)
Tire Size 14.00 -24TG
Operating Voltage 24 V
Alternator Supplied Amperage 55 amps

Steering

Articulation Angle 45 degrees
Turning Radius 24.7 ft in (7.5 m)

Transmission

Transmission Type Auto Power Shift Tansmission With torque Converter
Number Of Gears – Forward 6
Number Of Gears – Reverse 3
Max Speed – Forward 24.9 mph (40 km/h)
Max Speed – Reverse 12.1 mph (19.4 km/h)

Front Axle

Wheel Lean 17 degrees
Oscillation – Total 15 degrees
Ground Clearance 2 ft in (591 mm)

Moldboard

Moldboard Width 12.1 ft in (3660 mm)
Moldboard Height 24.9 in (630 mm)
Moldboard Thickness 0.8 in (20 mm)
Side Shift Left 49.3 in (1250 mm)
Side Shift Right 49.3 in (1250 mm)
Blade Pull At Max Weight 21683 lb (9835.3 kg)

Hydraulic System

Pump Type Axial Piston Pump
Pump Flow 26.1 gal/min (99 L/min)
Relief Valve Pressure 2668.7 psi (18400 kPa)

Circle

Diameter 59.5 in (1510 mm)
Max Reach Outside Tires – Left 87.5 in (2220 mm)
Max Reach Outside Tires – Right 125.2 in (3180 mm)
Max Lift Above Ground 18.6 in (470 mm)
Ask a question