Volvo G710B Motor Grader

Dimensions

Overall Length 29.84 ft in (9093 mm)
Width Over Tires 8.17 ft in (2489 mm)
Wheelbase 20 ft in (6096 mm)
Blade Base 8.59 ft in (2616 mm)
Height To Top Of Isomount Cab 10.09 ft in (3073 mm)

Engine Details

Engine Make Volvo
Engine Model D7DGAE2
Power Measured @ 2200 rpm
Torque Measured @ 1400 rpm
Max Power 173 hp (129.1 kw)
Net Power Gears 7-8 173 hp (129.1 kw)
Net Torque Gears 7-8 591 lb ft (801.3 Nm)
Displacement 436 cu in (7.2 L)
Aspiration Turbocharged

Operational Specs

Std Operation Weight – Front Axle 9687.2 lb (4394 kg)
Hydraulic System Fluid Capacity 35.4 gal (134 L)
Std Operation Weight – Rear Axle 23715.2 lb (10757 kg)
Std Operation Weight – Total 33400.1 lb (15150 kg)
Fuel Tank Capacity 100 gal (378.5 L)
Cooling System Fluid Capacity 12.5 gal (47 L)
Transmission Fluid Capacity 10.1 gal (38 L)
Rear Diff/Final Drive Fluid Capacity 6.1 gal (23 L)
Tandem Case Fluid Capacity (Each) 26.5 gal (100 L)
Tire Size 13.00 x 24, G-2
Operating Voltage 24 V
Alternator Supplied Amperage 75 amps

Steering

Articulation Angle 22 degrees

Transmission

Transmission Type Powershift
Number Of Gears – Forward 8
Number Of Gears – Reverse 4
Max Speed – Forward 24.9 mph (40.1 km/h)
Max Speed – Reverse 17.8 mph (28.7 km/h)

Front Axle

Wheel Lean 18 degrees
Oscillation – Total 16 degrees
Ground Clearance 2 ft in (597 mm)

Moldboard

Moldboard Width 12 ft in (3657.6 mm)
Moldboard Height 25 in (635 mm)
Moldboard Thickness 0.9 in (22.3 mm)
Max Depth Of Cut 32 in (812.8 mm)
Side Shift Left 26.5 in (673.1 mm)
Side Shift Right 26.5 in (673.1 mm)
Blade Pull At Max Weight 20157 lb (9143.1 kg)
Blade Down Pressure 16968 lb (7696.6 kg)

Hydraulic System

Pump Type load sensing hydraulic
Pump Flow 75.1 gal/min (284 L/min)
Relief Valve Pressure 2700 psi (18615.9 kPa)

Circle

Diameter 66.3 in (1683 mm)
Rotation 360 degrees
Shift Left 30.5 in (774.7 mm)
Shift Right 29.5 in (749.3 mm)
Max Reach Outside Tires – Left 79.5 in (2019.3 mm)
Max Reach Outside Tires – Right 80.5 in (2044.7 mm)
Max Lift Above Ground 17 in (431.8 mm)
Blade Tip Angle – Front 47 degrees
Blade Tip Angle – Rear 5 degrees
Ask a question