Volvo G720 VHP Motor Grader

Dimensions

Overall Length 27.84 ft in (8484 mm)
Width Over Tires 8.34 ft in (2540 mm)
Wheelbase 20 ft in (6096 mm)
Blade Base 8.51 ft in (2591 mm)
Height To Top Of Isomount Cab 10.17 ft in (3099 mm)

Engine Details

Number Of Cylinders 6
Engine Make Cummins
Engine Model 6C8.3
Max Power 195 hp (145.5 kw)
Net Power Gears 7-8 195 hp (145.5 kw)
Net Torque Gears 7-8 636 lb ft (862.4 Nm)
Displacement 504.7 cu in (8.3 L)
Aspiration Turbocharged

Operational Specs

Std Operation Weight – Front Axle 9614.4 lb (4361 kg)
Std Operation Weight – Rear Axle 22961.2 lb (10415 kg)
Hydraulic System Fluid Capacity 23.8 gal (90 L)
Std Operation Weight – Total 32571.1 lb (14774 kg)
Fuel Tank Capacity 102.4 gal (387.5 L)
Cooling System Fluid Capacity 12.5 gal (47 L)
Transmission Fluid Capacity 10.1 gal (38 L)
Rear Diff/Final Drive Fluid Capacity 6.1 gal (23 L)
Tandem Case Fluid Capacity (Each) 26.5 gal (100 L)
Operating Voltage 24 V

Steering

Articulation Angle 72 degrees
Turning Radius 25.5 ft in (7.8 m)

Transmission

Transmission Type Volvo 8400
Number Of Gears – Forward 8
Number Of Gears – Reverse 4
Max Speed – Forward 28.4 mph (45.7 km/h)
Max Speed – Reverse 20.4 mph (32.7 km/h)

Front Axle

Wheel Lean 18 degrees
Oscillation – Total 16 degrees
Ground Clearance 2 ft in (609.6 mm)

Moldboard

Moldboard Width 12 ft in (3657.6 mm)
Moldboard Height 25 in (635 mm)
Moldboard Thickness 0.9 in (22.3 mm)
Max Depth Of Cut 17.5 in (444.5 mm)
Side Shift Left 26.5 in (673.1 mm)
Side Shift Right 26.5 in (673.1 mm)
Blade Pull At Max Weight 7853 lb (3562.1 kg)
Blade Down Pressure 16717 lb (7582.8 kg)

Hydraulic System

Pump Type load sensing hydraulic
Pump Flow 50.5 gal/min (191 L/min)
Relief Valve Pressure 2500 psi (17236.9 kPa)

Circle

Rotation 360 degrees
Shift Left 30.5 in (774.7 mm)
Shift Right 29.5 in (749.3 mm)
Max Reach Outside Tires – Left 120 in (3048 mm)
Max Reach Outside Tires – Right 119.5 in (3035.3 mm)
Blade Tip Angle – Front 45 degrees
Blade Tip Angle – Rear 6.5 degrees
Ask a question