Volvo G726 VHP Motor Grader


Dimensions

Overall Length 27.84 ft in (8484 mm)
Width Over Tires 8.34 ft in (2540 mm)
Wheelbase 20 ft in (6096 mm)
Blade Base 8.51 ft in (2591 mm)
Height To Top Of Isomount Cab 10.17 ft in (3099 mm)

Engine Details

Number Of Cylinders 6
Engine Make Cummins
Engine Model 6C8.3
Max Power 195 hp (145.5 kw)
Net Power Gears 7-8 195 hp (145.5 kw)
Net Torque Gears 7-8 636 lb ft (862.4 Nm)
Displacement 504.5 cu in (8.3 L)
Aspiration Turbocharged

Operational Specs

Std Operation Weight – Front Axle 10007 lb (4539.1 kg)
Hydraulic System Fluid Capacity 23.8 gal (90 L)
Std Operation Weight – Rear Axle 23543 lb (10679 kg)
Std Operation Weight – Total 33550 lb (15218.1 kg)
Fuel Tank Capacity 100 gal (378.5 L)
Cooling System Fluid Capacity 12.5 gal (47 L)
Transmission Fluid Capacity 10.1 gal (38 L)
Rear Diff/Final Drive Fluid Capacity 6.1 gal (23 L)
Tandem Case Fluid Capacity (Each) 26.5 gal (100 L)
Tire Size 14.00 x 24, G-2
Operating Voltage 12 V
Alternator Supplied Amperage 75 amps

Steering

Articulation Angle 22 degrees

Transmission

Transmission Type Powershift
Number Of Gears – Forward 8
Number Of Gears – Reverse 4
Max Speed – Forward 28.5 mph (45.9 km/h)
Max Speed – Reverse 20.4 mph (32.9 km/h)

Front Axle

Wheel Lean 15 degrees
Oscillation – Total 16 degrees
Ground Clearance 2.1 ft in (610 mm)

Moldboard

Moldboard Width 12 ft in (3657.6 mm)
Moldboard Height 25 in (635 mm)
Moldboard Thickness 0.9 in (22.3 mm)
Max Depth Of Cut 32 in (812.8 mm)
Side Shift Left 26.5 in (673.1 mm)
Side Shift Right 26.5 in (673.1 mm)
Blade Pull At Max Weight 21189 lb (9611.2 kg)
Blade Down Pressure 17403 lb (7893.9 kg)

Hydraulic System

Pump Type load sensing hydraulic
Pump Flow 50.5 gal/min (191 L/min)
Relief Valve Pressure 2500 psi (17236.9 kPa)

Circle

Diameter 66.3 in (1683 mm)
Rotation 360 degrees
Shift Left 30.5 in (774.7 mm)
Shift Right 29.5 in (749.3 mm)
Max Reach Outside Tires – Left 79.5 in (2019.3 mm)
Max Reach Outside Tires – Right 79 in (2006.6 mm)
Max Lift Above Ground 17.5 in (444.5 mm)
Blade Tip Angle – Front 44 degrees
Blade Tip Angle – Rear 6.5 degrees
Ask a question